Minor doc and consistency issue

[5axes]

Minor doc and consistency issue

[5axes]

The values for the line height are just given as indication. Some user are using 0.5 , 0.6 or 0.8 mm nozzle and idealy you should use the same value as you have in your profil. So using just one height or showing just one height as example is not a good idea on my point of view.

Concerning the link on the Wikipage ... Yes I had the same thought this morning :)

[rubydesign]

Fair enough.
But it does say on the wiki https://github.com/5axes/Calibration-Shapes/wiki/PLA-TempTower-220---190%C2%B0C#printing-conditions
to use 0.16 . And i guess for a reason.

Because i did it with 0.2 (my standard) and the layer change was not working out. So the reason being that the script default layer change works with the model size and the layer hight. But not with 0.2 or other layer hights, in which case you would have to do the maths.
Also an ok option, but maybe it should say

[5axes]

0.16 it's just because it's a basic profil :

And yes the values must be calculated according to the geometry and the layer height. As the postprocessing script can be used on any kind of geometry and not just with the plugin models , we cannot limit the Change Values automaticaly.