Powmr Hvm pro 6.2 kw and jk bms (black one with 2amps balancer)

[flyzet-prog]

Powmr Hvm pro 6.2 kw and jk bms (black one with 2amps balancer)

[ai-republic]

Hi,
sorry to answer so late, but I needed to research a little. I did find the specification for the PACE and PYLON RS485/RS232 communication protocol so it should be no problem to create a binding for that.
I will see that I can start the implementation for that maybe today, but I'm a little busy at the moment. I hope to get it finished on the next weekend :)

[ai-republic]

Yes, your JK BMS should be able to communicate via RS485 or CAN depending on your version. This should already be supported by the JK_485 or JK_CAN binding respectively for the BMS in the Configurator app. Then for the inverter binding choose PYLON_RS485 as binding - once I have implemented it this weekend ;)

[flyzet-prog]

Hi, sorry to answer so late, but I needed to research a little. I did find the specification for the PACE and PYLON RS485/RS232 communication protocol so it should be no problem to create a binding for that. I will see that I can start the implementation for that maybe today, but I'm a little busy at the moment. I hope to get it finished on the next weekend :)

So, you believe i can properly make communication to bms even if there is no such option on inverter to chose some protocol? Much appreciated for you reply, hope you can help me to resolve my problem. Thanks

[flyzet-prog]

Yes, your JK BMS should be able to communicate via RS485 or CAN depending on your version. This should already be supported by the JK_485 or JK_CAN binding respectively for the BMS in the Configurator app. Then for the inverter binding choose PYLON_RS485 as binding - once I have implemented it this weekend ;)

I am planing to use Jk-Pb2a16s20p. But my inverter not uses rs485, it's use rs232 communication, and no any options on inverter menu to chose Pylon protocol. Thank you for you reply, i hope i can use your integration to properly communicate jk bms with my inverter.

[ai-republic]

It should be ok using the RS485 binding as the RS232 of your inverter also only communicates via serial interface over the 2 wires. Its basically the same.

[flyzet-prog]

It should be ok using the RS485 binding as the RS232 of your inverter also only communicates via serial interface over the 2 wires. Its basically the same.

Ok, please let me know when you will create porting to my inverter i can test it out.