Cannot get goodput

[aldalbahias]

Cannot get goodput

[ktsik]

Hi again,

How then did you get the throughput data reported at your papers, like for instance in figure 4 of your paper "Extending ns3 to simulate VLC at network level"
I run the script shown in fig.3 in the same paper.

After doing some debugging I observed that the packets are successfully received by Relay A (via ndAp_Relay DeviceContainer) but they are never received by Relay B (via ndRelayAp_RelayMt2 device container, VLC Channel in yellows). I tried with ns3 version v3.25, for which VLC module was written, withought modifying anything (script or VLC model). So, it seems that something goes wrong with your model.

Thanks,
Ktsik

[Aldalbahias]

Hello Fr3man1,

Please use the last version of this simulator. As mentioned it should be compatible with ns3 x.25.

[ktsik]

Hi,

I have been trying to run this simulation in ns3.30, but fail to get goodput results. Is it working in ns3.25, and is the code still maintained?

Thanks
Ktsik

[electronicengine]

Hi,

Goodput data is always at infinity

Thanks
Yusuf.

[electronicengine]

Hi again,

How then did you get the throughput data reported at your papers, like for instance in figure 4 of your paper "Extending ns3 to simulate VLC at network level"
I run the script shown in fig.3 in the same paper.

After doing some debugging I observed that the packets are successfully received by Relay A (via ndAp_Relay DeviceContainer) but they are never received by Relay B (via ndRelayAp_RelayMt2 device container, VLC Channel in yellows). I tried with ns3 version v3.25, for which VLC module was written, withought modifying anything (script or VLC model). So, it seems that something goes wrong with your model.

Thanks,
Ktsik

Hi.

I have testded the scripts too. I found same results.

[Aldalbahias]

Dear Ktsik, As far as I know, yes the code should work fine under 3.25 version of ns3. Being honest with you, I have not worked on the code since then. Therefore, this is the only version I have so far. Thank you

…

On Fri, Oct 18, 2019 at 10:37 AM ktsik ***@***.***> wrote: Hi, I have been trying to run this simulation in ns3.30, but fail to get goodput results. Is it working in ns3.25, and is the code still maintained? Thanks Ktsik — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#2?email_source=notifications&email_token=ACXTM27R5CASRUILO2F5T3DQPFRTTA5CNFSM4DIV42PKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEBTDZ7Q#issuecomment-543571198>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACXTM2YKZANUFKEZMJ36ZS3QPFRTTANCNFSM4DIV42PA> .

[Aldalbahias]

Hello, Not sure what results you found! Just to keep you updated, I have not maintain the code since 2017 but as far as I remember, it used to work fine with ns-3 version 3.25. Thank you.

…

On Sat, Dec 14, 2019 at 7:37 PM electronicengine ***@***.***> wrote: Hi again, How then did you get the throughput data reported at your papers, like for instance in figure 4 of your paper "Extending ns3 to simulate VLC at network level" I run the script shown in fig.3 in the same paper. [image: image] <https://user-images.githubusercontent.com/56050237/70773341-dfbd5200-1d7f-11ea-9654-e883cfbe651d.png> After doing some debugging I observed that the packets are successfully received by Relay A (via ndAp_Relay DeviceContainer) but they are never received by Relay B (via ndRelayAp_RelayMt2 device container, VLC Channel in yellows). I tried with ns3 version v3.25, for which VLC module was written, withought modifying anything (script or VLC model). So, it seems that something goes wrong with your model. Thanks, Ktsik Hi. I have testded the scripts too. I found same results. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#2?email_source=notifications&email_token=ACXTM22YATKUN4L26NS757TQYUDV7A5CNFSM4DIV42PKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEG4GKGI#issuecomment-565732633>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACXTM2Z7YGBAAUM2EIX2UJ3QYUDV7ANCNFSM4DIV42PA> .

[ktsik]

Hi,

As I explained in my previous the module was tested with the original script as downloaded from your repository. Apart from me, some others reported exactly the same results. Since the code does not work and is not maintained, I just wanted to become people aware to avoid wasting time with this.

Thanks,