Comments (11)
Sure, I'll try to look at it once things go back to normal in Ukraine/Kyiv (hopefully).
We have a war with russia who attacked Ukraine cowardly
from hc3-to-mqtt.
Sure-sure :) at the moment I'm not at home, but I'll send you in a few days. I have to pair with HC3 one of the modules.
from hc3-to-mqtt.
Sorry about the late reply, it's still relevant.
Here is the JSON from HC3:
response_1675154326793.json - the main device
response_1675154391851.json - roller shutter device (here you can see the "value2" value for the slats)
json.zip
Thanks in advance!
Norbert
from hc3-to-mqtt.
Hello @alexander-vitishchenko
i have tested and can confirm that venetian blinds update works.
from hc3-to-mqtt.
Ohh no... I simply can't believe this situation :( I'm checking the news every 10 mins, but I never thought I'll have such a direct contact. Of course it's not the most important thing at the moment, but glad to see that you can still access internet. Stay safe, I hope this nightmare ends soon. I wish you all the best and peace!
from hc3-to-mqtt.
Hi @jnorbi
Please let me know if tilt position control is still relevant for you?
And if so - can you please send me JSON files for your parent and child entities from your HC3 swagger?
Thank you,
Alexander
P.S.: apologies for late reply as I only finished my accommodation in Berlin
from hc3-to-mqtt.
It's good to see that you are okay! :) yes, it would be really nice if I could control the venetian blinds via mqtt.
Well, until you were unavailabe I tried to read about this device and tried to figure out the possible solution.
The only trick this device has "value" and "value2" field and the "value2" filed is not a standard Z-Wave device field, it's a Fibaro special thing. The "value" filed is for the up/down position, the "value2" field is for the tilt position in venetian blind mode. I tried to edit the LUA files but without a good developer env it wasn't easy...
At the moment the roller shutter modules are paired with a Z-Wave JS, but I found a JSON here: ilcato/homebridge-Fibaro-HC2#141
If you need anything else let me know and I'll try to send you ASAP.
Thanks in advance,
Norbert
from hc3-to-mqtt.
Hi @jnorbi,
This JSON ilcato/homebridge-Fibaro-HC2#141 is about HC2, while we use HC3
They may use a similar structure, but better double-check as it should take only few minutes of your time, and much longer for me in case HC3 is different and then I'll have to rework the implementation :-)
Just clicking Swagger (left-bottom part of main Fibaro HC3 screen) => devices => GET
/devices/{deviceID} => then share with me as a text file attached to GitHub response
Is all good about it?
from hc3-to-mqtt.
Please let me know if the request is still relevant, or could be closed as outdated due to no inputs provided
from hc3-to-mqtt.
Hello Alexander, attached files for fibaro roller shutter device.
In fibaro i have device ID909 controlling venetian blinds with two slides : one for vertical up down position second one for slats opening and closing.
in home assistant this device controls only vertical up down position, is it possible to add slats control - to have in home assistant in one card two slides for controlling vertical position and slats position.
fibaro home center shows only ID 908 and ID909 devices other are hidden. I have unhide ID910 device, and named it \slats/ to check if it is possible to control slats in home assistant. when device was imported to HA i have two cards for one venetian blind allowing me control vertical position and slats but it is not comfortable to have two cards separately.
from hc3-to-mqtt.
Hi @jnorbi, @Sukciukas,
Please check the latest QuickApp version and let me know if it works for you?
from hc3-to-mqtt.
Related Issues (20)
- Couldn't recognize device - com.fibaro.multilevelSwitch - com.fibaro.dimmer HOT 21
- Battery sensor created multiple times HOT 26
- feat request : nice blinder support HOT 15
- Unexpected response status HOT 49
- Problem in dispatchFibaroEventToMqtt(event) if a scene has the same identifier as a device HOT 6
- cover:close HOT 7
- Duplicate battery entities for each device HOT 4
- Error while fetching Fibaro HC3 events "End of file" HOT 7
- Problem with a keyFOB remote control in automations in HA HOT 6
- Unable to discoverDeviceHierarchy HOT 5
- Propose new device support (Zigbee RGB bulb) HOT 12
- elero blinds and shutters support HOT 18
- After update from 1.0.221 to 1.0.225 cover/curtain does not work anymore. HOT 14
- Control HA devices back from HC3 HOT 3
- Cover state does not update HOT 15
- Can't find a way to filter more than one device HOT 2
- Duplicates in home assistant for same device HOT 21
- Discovered entities with a name that starts with the device name HOT 12
- Door sensor not correctly detected. HOT 1
- Quickapp crashes immediately HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from hc3-to-mqtt.