Comments (4)
f4exb
commented on June 7, 2024
As mentioned in the linked issue I did a new build with libiio v0.21 and had the same results. Has the data format sent from the Pluto changed in any way?
from plutosdr-fw.
f4exb
commented on June 7, 2024
In case this is useful:
iio_info
/opt/install/libiio/bin/iio_info --uri usb:1.41.5
Library version: 0.21 (git tag: 565bf68)
Compiled with backends: local xml ip usb serial
IIO context created with usb backend.
Backend version: 0.21 (git tag: v0.21 )
Backend description string: Linux (none) 4.19.0-119999-g6edc6cd #319 SMP PREEMPT Mon Jul 6 15:45:01 CEST 2020 armv7l
IIO context has 15 attributes:
hw_model: Analog Devices PlutoSDR Rev.B (Z7010-AD9364)
hw_model_variant: 0
hw_serial: 104473222a87001509002b0037c5d449e8
fw_version: v0.32
ad9361-phy,xo_correction: 39999913
ad9361-phy,model: ad9364
local,kernel: 4.19.0-119999-g6edc6cd
uri: usb:1.41.5
usb,idVendor: 0456
usb,idProduct: b673
usb,release: 2.0
usb,vendor: Analog Devices Inc.
usb,product: PlutoSDR (ADALM-PLUTO)
usb,serial: 104473222a87001509002b0037c5d449e8
usb,libusb: 1.0.23.11397
IIO context has 5 devices:
iio:device0: adm1177
2 channels found:
voltage0: (input)
2 channel-specific attributes found:
attr 0: raw value: 759
attr 1: scale value: 6.433105468
current0: (input)
2 channel-specific attributes found:
attr 0: raw value: 739
attr 1: scale value: 0.516601562
No trigger on this device
iio:device1: ad9361-phy
9 channels found:
altvoltage1: TX_LO (output)
8 channel-specific attributes found:
attr 0: external value: 0
attr 1: fastlock_load value: 0
attr 2: fastlock_recall ERROR: Invalid argument (-22)
attr 3: fastlock_save value: 0 187,255,207,255,44,156,45,222,238,231,223,172,222,15,221,189
attr 4: fastlock_store value: 0
attr 5: frequency value: 2450000000
attr 6: frequency_available value: [46875001 1 6000000000]
attr 7: powerdown value: 0
voltage0: (input)
15 channel-specific attributes found:
attr 0: bb_dc_offset_tracking_en value: 1
attr 1: filter_fir_en value: 0
attr 2: gain_control_mode value: slow_attack
attr 3: gain_control_mode_available value: manual fast_attack slow_attack hybrid
attr 4: hardwaregain value: 67.000000 dB
attr 5: hardwaregain_available value: [-1 1 73]
attr 6: quadrature_tracking_en value: 1
attr 7: rf_bandwidth value: 1500000
attr 8: rf_bandwidth_available value: [200000 1 56000000]
attr 9: rf_dc_offset_tracking_en value: 1
attr 10: rf_port_select value: A_BALANCED
attr 11: rf_port_select_available value: A_BALANCED B_BALANCED C_BALANCED A_N A_P B_N B_P C_N C_P TX_MONITOR1 TX_MONITOR2 TX_MONITOR1_2
attr 12: rssi value: 98.25 dB
attr 13: sampling_frequency value: 2399999
attr 14: sampling_frequency_available value: [2083333 1 61440000]
voltage3: (output)
8 channel-specific attributes found:
attr 0: filter_fir_en value: 0
attr 1: raw value: 306
attr 2: rf_bandwidth value: 18000000
attr 3: rf_bandwidth_available value: [200000 1 40000000]
attr 4: rf_port_select_available value: A B
attr 5: sampling_frequency value: 2399999
attr 6: sampling_frequency_available value: [2083333 1 61440000]
attr 7: scale value: 1.000000
altvoltage0: RX_LO (output)
8 channel-specific attributes found:
attr 0: external value: 0
attr 1: fastlock_load value: 0
attr 2: fastlock_recall ERROR: Invalid argument (-22)
attr 3: fastlock_save value: 0 63,245,127,191,175,45,151,175,191,190,211,37,129,247,159,187
attr 4: fastlock_store value: 0
attr 5: frequency value: 145199998
attr 6: frequency_available value: [70000000 1 6000000000]
attr 7: powerdown value: 0
voltage2: (output)
8 channel-specific attributes found:
attr 0: filter_fir_en value: 0
attr 1: raw value: 306
attr 2: rf_bandwidth value: 18000000
attr 3: rf_bandwidth_available value: [200000 1 40000000]
attr 4: rf_port_select_available value: A B
attr 5: sampling_frequency value: 2399999
attr 6: sampling_frequency_available value: [2083333 1 61440000]
attr 7: scale value: 1.000000
temp0: (input)
1 channel-specific attributes found:
attr 0: input value: 38596
voltage0: (output)
10 channel-specific attributes found:
attr 0: filter_fir_en value: 0
attr 1: hardwaregain value: -10.000000 dB
attr 2: hardwaregain_available value: [-89.750000 0.250000 0.000000]
attr 3: rf_bandwidth value: 18000000
attr 4: rf_bandwidth_available value: [200000 1 40000000]
attr 5: rf_port_select value: A
attr 6: rf_port_select_available value: A B
attr 7: rssi value: 0.00 dB
attr 8: sampling_frequency value: 2399999
attr 9: sampling_frequency_available value: [2083333 1 61440000]
voltage2: (input)
13 channel-specific attributes found:
attr 0: bb_dc_offset_tracking_en value: 1
attr 1: filter_fir_en value: 0
attr 2: gain_control_mode_available value: manual fast_attack slow_attack hybrid
attr 3: offset value: 57
attr 4: quadrature_tracking_en value: 1
attr 5: raw value: 920
attr 6: rf_bandwidth value: 1500000
attr 7: rf_bandwidth_available value: [200000 1 56000000]
attr 8: rf_dc_offset_tracking_en value: 1
attr 9: rf_port_select_available value: A_BALANCED B_BALANCED C_BALANCED A_N A_P B_N B_P C_N C_P TX_MONITOR1 TX_MONITOR2 TX_MONITOR1_2
attr 10: sampling_frequency value: 2399999
attr 11: sampling_frequency_available value: [2083333 1 61440000]
attr 12: scale value: 0.305250
out: (input, WARN:iio_channel_get_type()=UNKNOWN)
1 channel-specific attributes found:
attr 0: voltage_filter_fir_en value: 0
18 device-specific attributes found:
attr 0: calib_mode value: auto
attr 1: calib_mode_available value: auto manual manual_tx_quad tx_quad rf_dc_offs rssi_gain_step
attr 2: dcxo_tune_coarse ERROR: No such device (-19)
attr 3: dcxo_tune_coarse_available value: [0 0 0]
attr 4: dcxo_tune_fine ERROR: No such device (-19)
attr 5: dcxo_tune_fine_available value: [0 0 0]
attr 6: ensm_mode value: fdd
attr 7: ensm_mode_available value: sleep wait alert fdd pinctrl pinctrl_fdd_indep
attr 8: filter_fir_config value: FIR Rx: 64,1 Tx: 64,1
attr 9: gain_table_config value: <gaintable AD9361 type=FULL dest=3 start=0 end=1300000000>
-1, 0x00, 0x00, 0x20
-1, 0x00, 0x00, 0x00
-1, 0x00, 0x00, 0x00
0, 0x00, 0x01, 0x00
1, 0x00, 0x02, 0x00
2, 0x00, 0x03, 0x00
3, 0x00, 0x04, 0x00
4, 0x00, 0x05, 0x00
5, 0x01, 0x03, 0x20
6, 0x01, 0x04, 0x00
7, 0x01, 0x05, 0x00
8, 0x01, 0x06, 0x00
9, 0x01, 0x07, 0x00
10, 0x01, 0x08, 0x00
11, 0x01, 0x09, 0x00
12, 0x01, 0x0A, 0x00
13, 0x01, 0x0B, 0x00
14, 0x01, 0x0C, 0x00
15, 0x01, 0x0D, 0x00
16, 0x01, 0x0E, 0x00
17, 0x02, 0x09, 0x20
18, 0x02, 0x0A, 0x00
19, 0x02, 0x0B, 0x00
20, 0x02, 0x0C, 0x00
21, 0x02, 0x0D, 0x00
22, 0x02, 0x0E, 0x00
23, 0x02, 0x0F, 0x00
24, 0x02, 0x10, 0x00
25, 0x02, 0x2B, 0x20
26, 0x02, 0x2C, 0x00
27, 0x04, 0x28, 0x20
28, 0x04, 0x29, 0x00
29, 0x04, 0x2A, 0x00
30, 0x04, 0x2B, 0x00
31, 0x24, 0x20, 0x20
32, 0x24, 0x21, 0x00
33, 0x44, 0x20, 0x20
34, 0x44, 0x21, 0x00
35, 0x44, 0x22, 0x00
36, 0x44, 0x23, 0x00
37, 0x44, 0x24, 0x00
38, 0x44, 0x25, 0x00
39, 0x44, 0x26, 0x00
40, 0x44, 0x27, 0x00
41, 0x44, 0x28, 0x00
42, 0x44, 0x29, 0x00
43, 0x44, 0x2A, 0x00
44, 0x44, 0x2B, 0x00
45, 0x44, 0x2C, 0x00
46, 0x44, 0x2D, 0x00
47, 0x44, 0x2E, 0x00
48, 0x44, 0x2F, 0x00
49, 0x44, 0x30, 0x00
50, 0x44, 0x31, 0x00
51, 0x44, 0x32, 0x00
52, 0x64, 0x2E, 0x20
53, 0x64, 0x2F, 0x00
54, 0x64, 0x30, 0x00
55, 0x64, 0x31, 0x00
56, 0x64, 0x32, 0x00
57, 0x64, 0x33, 0x00
58, 0x64, 0x34, 0x00
59, 0x64, 0x35, 0x00
60, 0x64, 0x36, 0x00
61, 0x64, 0x37, 0x00
62, 0x64, 0x38, 0x00
63, 0x65, 0x38, 0x20
64, 0x66, 0x38, 0x20
65, 0x67, 0x38, 0x20
66, 0x68, 0x38, 0x20
67, 0x69, 0x38, 0x20
68, 0x6A, 0x38, 0x20
69, 0x6B, 0x38, 0x20
70, 0x6C, 0x38, 0x20
71, 0x6D, 0x38, 0x20
72, 0x6E, 0x38, 0x20
73, 0x6F, 0x38, 0x20
</gaintable>
attr 10: multichip_sync ERROR: Permission denied (-13)
attr 11: rssi_gain_step_error value: lna_error: 0 0 0 0
mixer_error: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
gain_step_calib_reg_val: 0 0 0 0 0
attr 12: rx_path_rates value: BBPLL:921599998 ADC:28799999 R2:9599999 R1:4799999 RF:2399999 RXSAMP:2399999
attr 13: trx_rate_governor value: nominal
attr 14: trx_rate_governor_available value: nominal highest_osr
attr 15: tx_path_rates value: BBPLL:921599998 DAC:28799999 T2:9599999 T1:4799999 TF:2399999 TXSAMP:2399999
attr 16: xo_correction value: 39999913
attr 17: xo_correction_available value: [39991914 1 40007912]
182 debug attributes found:
debug attr 0: digital_tune value: 0
debug attr 1: calibration_switch_control value: 0
debug attr 2: multichip_sync value: 0
debug attr 3: gaininfo_rx2 ERROR: Resource temporarily unavailable (-11)
debug attr 4: gaininfo_rx1 value: 68 71 0 0 0 0 0 0
debug attr 5: bist_timing_analysis value: 0
debug attr 6: gpo_set value: 0
debug attr 7: bist_tone value: 0
debug attr 8: bist_prbs value: 0
debug attr 9: loopback value: 0
debug attr 10: initialize value: 0
debug attr 11: adi,bb-clk-change-dig-tune-enable value: 0
debug attr 12: adi,axi-half-dac-rate-enable value: 0
debug attr 13: adi,txmon-2-lo-cm value: 48
debug attr 14: adi,txmon-1-lo-cm value: 48
debug attr 15: adi,txmon-2-front-end-gain value: 2
debug attr 16: adi,txmon-1-front-end-gain value: 2
debug attr 17: adi,txmon-duration value: 8192
debug attr 18: adi,txmon-delay value: 511
debug attr 19: adi,txmon-one-shot-mode-enable value: 0
debug attr 20: adi,txmon-dc-tracking-enable value: 0
debug attr 21: adi,txmon-high-gain value: 24
debug attr 22: adi,txmon-low-gain value: 0
debug attr 23: adi,txmon-low-high-thresh value: 37000
debug attr 24: adi,gpo3-tx-delay-us value: 0
debug attr 25: adi,gpo3-rx-delay-us value: 0
debug attr 26: adi,gpo2-tx-delay-us value: 0
debug attr 27: adi,gpo2-rx-delay-us value: 0
debug attr 28: adi,gpo1-tx-delay-us value: 0
debug attr 29: adi,gpo1-rx-delay-us value: 0
debug attr 30: adi,gpo0-tx-delay-us value: 0
debug attr 31: adi,gpo0-rx-delay-us value: 0
debug attr 32: adi,gpo3-slave-tx-enable value: 0
debug attr 33: adi,gpo3-slave-rx-enable value: 0
debug attr 34: adi,gpo2-slave-tx-enable value: 0
debug attr 35: adi,gpo2-slave-rx-enable value: 0
debug attr 36: adi,gpo1-slave-tx-enable value: 0
debug attr 37: adi,gpo1-slave-rx-enable value: 0
debug attr 38: adi,gpo0-slave-tx-enable value: 0
debug attr 39: adi,gpo0-slave-rx-enable value: 0
debug attr 40: adi,gpo3-inactive-state-high-enable value: 0
debug attr 41: adi,gpo2-inactive-state-high-enable value: 0
debug attr 42: adi,gpo1-inactive-state-high-enable value: 0
debug attr 43: adi,gpo0-inactive-state-high-enable value: 0
debug attr 44: adi,gpo-manual-mode-enable-mask value: 0
debug attr 45: adi,gpo-manual-mode-enable value: 0
debug attr 46: adi,aux-dac2-tx-delay-us value: 0
debug attr 47: adi,aux-dac2-rx-delay-us value: 0
debug attr 48: adi,aux-dac2-active-in-alert-enable value: 0
debug attr 49: adi,aux-dac2-active-in-tx-enable value: 0
debug attr 50: adi,aux-dac2-active-in-rx-enable value: 0
debug attr 51: adi,aux-dac2-default-value-mV value: 0
debug attr 52: adi,aux-dac1-tx-delay-us value: 0
debug attr 53: adi,aux-dac1-rx-delay-us value: 0
debug attr 54: adi,aux-dac1-active-in-alert-enable value: 0
debug attr 55: adi,aux-dac1-active-in-tx-enable value: 0
debug attr 56: adi,aux-dac1-active-in-rx-enable value: 0
debug attr 57: adi,aux-dac1-default-value-mV value: 0
debug attr 58: adi,aux-dac-manual-mode-enable value: 1
debug attr 59: adi,aux-adc-decimation value: 256
debug attr 60: adi,aux-adc-rate value: 40000000
debug attr 61: adi,temp-sense-decimation value: 256
debug attr 62: adi,temp-sense-periodic-measurement-enable value: 1
debug attr 63: adi,temp-sense-offset-signed value: 206
debug attr 64: adi,temp-sense-measurement-interval-ms value: 1000
debug attr 65: adi,elna-gaintable-all-index-enable value: 0
debug attr 66: adi,elna-rx2-gpo1-control-enable value: 0
debug attr 67: adi,elna-rx1-gpo0-control-enable value: 0
debug attr 68: adi,elna-bypass-loss-mdB value: 0
debug attr 69: adi,elna-gain-mdB value: 0
debug attr 70: adi,elna-settling-delay-ns value: 0
debug attr 71: adi,ctrl-outs-enable-mask value: 255
debug attr 72: adi,ctrl-outs-index value: 0
debug attr 73: adi,rssi-duration value: 1000
debug attr 74: adi,rssi-wait value: 1
debug attr 75: adi,rssi-delay value: 1
debug attr 76: adi,rssi-unit-is-rx-samples-enable value: 0
debug attr 77: adi,rssi-restart-mode value: 3
debug attr 78: adi,fagc-adc-large-overload-inc-steps value: 2
debug attr 79: adi,fagc-power-measurement-duration-in-state5 value: 64
debug attr 80: adi,fagc-rst-gla-if-en-agc-pulled-high-mode value: 0
debug attr 81: adi,fagc-rst-gla-en-agc-pulled-high-enable value: 0
debug attr 82: adi,fagc-rst-gla-large-lmt-overload-enable value: 1
debug attr 83: adi,fagc-rst-gla-large-adc-overload-enable value: 1
debug attr 84: adi,fagc-energy-lost-stronger-sig-gain-lock-exit-cnt value: 8
debug attr 85: adi,fagc-rst-gla-engergy-lost-sig-thresh-below-ll value: 10
debug attr 86: adi,fagc-rst-gla-engergy-lost-goto-optim-gain-enable value: 1
debug attr 87: adi,fagc-rst-gla-engergy-lost-sig-thresh-exceeded-enable value: 1
debug attr 88: adi,fagc-rst-gla-stronger-sig-thresh-above-ll value: 10
debug attr 89: adi,fagc-optimized-gain-offset value: 5
debug attr 90: adi,fagc-rst-gla-stronger-sig-thresh-exceeded-enable value: 1
debug attr 91: adi,fagc-use-last-lock-level-for-set-gain-enable value: 1
debug attr 92: adi,fagc-gain-index-type-after-exit-rx-mode value: 0
debug attr 93: adi,fagc-gain-increase-after-gain-lock-enable value: 0
debug attr 94: adi,fagc-final-overrange-count value: 3
debug attr 95: adi,fagc-lmt-final-settling-steps value: 1
debug attr 96: adi,fagc-lpf-final-settling-steps value: 1
debug attr 97: adi,fagc-lock-level-gain-increase-upper-limit value: 5
debug attr 98: adi,fagc-lock-level-lmt-gain-increase-enable value: 1
debug attr 99: adi,fagc-lp-thresh-increment-steps value: 1
debug attr 100: adi,fagc-lp-thresh-increment-time value: 5
debug attr 101: adi,fagc-allow-agc-gain-increase-enable value: 0
debug attr 102: adi,fagc-state-wait-time-ns value: 260
debug attr 103: adi,fagc-dec-pow-measurement-duration value: 64
debug attr 104: adi,agc-immed-gain-change-if-large-lmt-overload-enable value: 0
debug attr 105: adi,agc-immed-gain-change-if-large-adc-overload-enable value: 0
debug attr 106: adi,agc-gain-update-interval-us value: 1000
debug attr 107: adi,agc-sync-for-gain-counter-enable value: 0
debug attr 108: adi,agc-dig-gain-step-size value: 4
debug attr 109: adi,agc-dig-saturation-exceed-counter value: 3
debug attr 110: adi,agc-lmt-overload-large-inc-steps value: 2
debug attr 111: adi,agc-lmt-overload-small-exceed-counter value: 10
debug attr 112: adi,agc-lmt-overload-large-exceed-counter value: 10
debug attr 113: adi,agc-adc-lmt-small-overload-prevent-gain-inc-enable value: 0
debug attr 114: adi,agc-adc-large-overload-inc-steps value: 2
debug attr 115: adi,agc-adc-large-overload-exceed-counter value: 10
debug attr 116: adi,agc-adc-small-overload-exceed-counter value: 10
debug attr 117: adi,agc-outer-thresh-low-inc-steps value: 2
debug attr 118: adi,agc-outer-thresh-low value: 18
debug attr 119: adi,agc-inner-thresh-low-inc-steps value: 1
debug attr 120: adi,agc-inner-thresh-low value: 12
debug attr 121: adi,agc-inner-thresh-high-dec-steps value: 1
debug attr 122: adi,agc-inner-thresh-high value: 10
debug attr 123: adi,agc-outer-thresh-high-dec-steps value: 2
debug attr 124: adi,agc-outer-thresh-high value: 5
debug attr 125: adi,agc-attack-delay-extra-margin-us value: 1
debug attr 126: adi,mgc-split-table-ctrl-inp-gain-mode value: 0
debug attr 127: adi,mgc-dec-gain-step value: 2
debug attr 128: adi,mgc-inc-gain-step value: 2
debug attr 129: adi,mgc-rx2-ctrl-inp-enable value: 0
debug attr 130: adi,mgc-rx1-ctrl-inp-enable value: 0
debug attr 131: adi,gc-use-rx-fir-out-for-dec-pwr-meas-enable value: 0
debug attr 132: adi,gc-max-dig-gain value: 15
debug attr 133: adi,gc-dig-gain-enable value: 0
debug attr 134: adi,gc-low-power-thresh value: 24
debug attr 135: adi,gc-dec-pow-measurement-duration value: 8192
debug attr 136: adi,gc-lmt-overload-low-thresh value: 704
debug attr 137: adi,gc-lmt-overload-high-thresh value: 800
debug attr 138: adi,gc-adc-large-overload-thresh value: 58
debug attr 139: adi,gc-adc-small-overload-thresh value: 47
debug attr 140: adi,gc-adc-ovr-sample-size value: 4
debug attr 141: adi,gc-rx2-mode value: 2
debug attr 142: adi,gc-rx1-mode value: 2
debug attr 143: adi,update-tx-gain-in-alert-enable value: 0
debug attr 144: adi,tx-attenuation-mdB value: 10000
debug attr 145: adi,rf-tx-bandwidth-hz value: 18000000
debug attr 146: adi,rf-rx-bandwidth-hz value: 18000000
debug attr 147: adi,qec-tracking-slow-mode-enable value: 0
debug attr 148: adi,dc-offset-count-low-range value: 50
debug attr 149: adi,dc-offset-count-high-range value: 40
debug attr 150: adi,dc-offset-attenuation-low-range value: 5
debug attr 151: adi,dc-offset-attenuation-high-range value: 6
debug attr 152: adi,dc-offset-tracking-update-event-mask value: 5
debug attr 153: adi,clk-output-mode-select value: 0
debug attr 154: adi,external-rx-lo-enable value: 0
debug attr 155: adi,external-tx-lo-enable value: 0
debug attr 156: adi,xo-disable-use-ext-refclk-enable value: 1
debug attr 157: adi,tx-lo-powerdown-managed-enable value: 1
debug attr 158: adi,trx-synthesizer-target-fref-overwrite-hz value: 80008000
debug attr 159: adi,rx1-rx2-phase-inversion-enable value: 0
debug attr 160: adi,tx-rf-port-input-select-lock-enable value: 1
debug attr 161: adi,rx-rf-port-input-select-lock-enable value: 1
debug attr 162: adi,tx-rf-port-input-select value: 0
debug attr 163: adi,rx-rf-port-input-select value: 0
debug attr 164: adi,split-gain-table-mode-enable value: 0
debug attr 165: adi,1rx-1tx-mode-use-tx-num value: 1
debug attr 166: adi,1rx-1tx-mode-use-rx-num value: 1
debug attr 167: adi,2rx-2tx-mode-enable value: 0
debug attr 168: adi,digital-interface-tune-fir-disable value: 1
debug attr 169: adi,digital-interface-tune-skip-mode value: 0
debug attr 170: adi,tx-fastlock-pincontrol-enable value: 0
debug attr 171: adi,rx-fastlock-pincontrol-enable value: 0
debug attr 172: adi,rx-fastlock-delay-ns value: 0
debug attr 173: adi,tx-fastlock-delay-ns value: 0
debug attr 174: adi,tdd-skip-vco-cal-enable value: 0
debug attr 175: adi,tdd-use-dual-synth-mode-enable value: 0
debug attr 176: adi,debug-mode-enable value: 0
debug attr 177: adi,ensm-enable-txnrx-control-enable value: 0
debug attr 178: adi,ensm-enable-pin-pulse-mode-enable value: 0
debug attr 179: adi,frequency-division-duplex-independent-mode-enable value: 0
debug attr 180: adi,frequency-division-duplex-mode-enable value: 1
debug attr 181: direct_reg_access value: 0x0
No trigger on this device
iio:device2: xadc
10 channels found:
voltage5: vccoddr (input)
2 channel-specific attributes found:
attr 0: raw value: 1837
attr 1: scale value: 0.732421875
voltage0: vccint (input)
2 channel-specific attributes found:
attr 0: raw value: 1378
attr 1: scale value: 0.732421875
voltage4: vccpaux (input)
2 channel-specific attributes found:
attr 0: raw value: 2452
attr 1: scale value: 0.732421875
temp0: (input)
3 channel-specific attributes found:
attr 0: offset value: -2219
attr 1: raw value: 2698
attr 2: scale value: 123.040771484
voltage7: vrefn (input)
2 channel-specific attributes found:
attr 0: raw value: 1
attr 1: scale value: 0.732421875
voltage1: vccaux (input)
2 channel-specific attributes found:
attr 0: raw value: 2454
attr 1: scale value: 0.732421875
voltage2: vccbram (input)
2 channel-specific attributes found:
attr 0: raw value: 1379
attr 1: scale value: 0.732421875
voltage3: vccpint (input)
2 channel-specific attributes found:
attr 0: raw value: 1375
attr 1: scale value: 0.732421875
voltage8: (input)
2 channel-specific attributes found:
attr 0: raw value: 3686
attr 1: scale value: 0.244140625
voltage6: vrefp (input)
2 channel-specific attributes found:
attr 0: raw value: 1701
attr 1: scale value: 0.732421875
1 device-specific attributes found:
attr 0: sampling_frequency value: 961538
No trigger on this device
iio:device3: cf-ad9361-dds-core-lpc (buffer capable)
6 channels found:
voltage0: (output, index: 0, format: le:S16/16>>0)
4 channel-specific attributes found:
attr 0: calibphase value: 0.000000
attr 1: calibscale value: 1.000000
attr 2: sampling_frequency value: 2399999
attr 3: sampling_frequency_available value: 2399999 299999
voltage1: (output, index: 1, format: le:S16/16>>0)
4 channel-specific attributes found:
attr 0: calibphase value: 0.000000
attr 1: calibscale value: 1.000000
attr 2: sampling_frequency value: 2399999
attr 3: sampling_frequency_available value: 2399999 299999
altvoltage3: TX1_Q_F2 (output)
5 channel-specific attributes found:
attr 0: frequency value: 1599450
attr 1: phase value: 0
attr 2: raw value: 1
attr 3: sampling_frequency value: 2399999
attr 4: scale value: 0.000000
altvoltage1: TX1_I_F2 (output)
5 channel-specific attributes found:
attr 0: frequency value: 1599450
attr 1: phase value: 90000
attr 2: raw value: 1
attr 3: sampling_frequency value: 2399999
attr 4: scale value: 0.000000
altvoltage0: TX1_I_F1 (output)
5 channel-specific attributes found:
attr 0: frequency value: 1599450
attr 1: phase value: 90000
attr 2: raw value: 1
attr 3: sampling_frequency value: 2399999
attr 4: scale value: 0.000000
altvoltage2: TX1_Q_F1 (output)
5 channel-specific attributes found:
attr 0: frequency value: 1599450
attr 1: phase value: 0
attr 2: raw value: 1
attr 3: sampling_frequency value: 2399999
attr 4: scale value: 0.000000
3 buffer-specific attributes found:
attr 0: data_available value: 0
attr 1: length_align_bytes value: 8
attr 2: watermark value: 2048
1 debug attributes found:
debug attr 0: direct_reg_access value: 0x90162
No trigger on this device
iio:device4: cf-ad9361-lpc (buffer capable)
2 channels found:
voltage0: (input, index: 0, format: le:S12/16>>0)
6 channel-specific attributes found:
attr 0: calibbias value: 0
attr 1: calibphase value: 0.000000
attr 2: calibscale value: 1.000000
attr 3: samples_pps ERROR: No such device (-19)
attr 4: sampling_frequency value: 2399999
attr 5: sampling_frequency_available value: 2399999 299999
voltage1: (input, index: 1, format: le:S12/16>>0)
6 channel-specific attributes found:
attr 0: calibbias value: 0
attr 1: calibphase value: 0.000000
attr 2: calibscale value: 1.000000
attr 3: samples_pps ERROR: No such device (-19)
attr 4: sampling_frequency value: 2399999
attr 5: sampling_frequency_available value: 2399999 299999
3 buffer-specific attributes found:
attr 0: data_available value: 0
attr 1: length_align_bytes value: 8
attr 2: watermark value: 2048
2 debug attributes found:
debug attr 0: pseudorandom_err_check value: CH0 : PN9 : Out of Sync : PN Error
CH1 : PN9 : Out of Sync : PN Error
debug attr 1: direct_reg_access value: 0x0
No trigger on this device
from plutosdr-fw.
f4exb
commented on June 7, 2024
I confirm this is fixed with f4exb/sdrangel#604
from plutosdr-fw.
mhennerich
commented on June 7, 2024
Closed
from plutosdr-fw.
Related Issues (20)
- legal_info_html.sh goes into infinite loop for http code 302 HOT 1
- Vivado 2021.1 "Incorrect selection of kernel headers: expected 4.14.x, got 5.8.x" HOT 2
- ... HOT 5
- JTAG Bootstrap package: `xmd` program discontinued HOT 1
- Only one PlutoSDR accessible vi SSH HOT 5
- Add hook in init.d to run user application code HOT 1
- fatal: reference is not a tree HOT 2
- plutosdr-fw fails to build. HOT 3
- Plutosdr-fw build failed, Cannot execute cross-compiler '/arm-xilinx-linux-gnueabi-gcc' HOT 3
- GLIBC Version with default v0.35 build HOT 1
- Adding timestamping to PlutoSDR firmware HOT 1
- Problem with firmware programming via jtag HOT 1
- v0.36 no more USB connection HOT 3
- [Questions] Updating FPGA procedure HOT 1
- Update Cross Compiling Documention for FW 0.37 HOT 5
- IPv6 off? HOT 3
- xsct scripts/create_fsbl_project.tcl fails on Xilinx SDK 2019.1 HOT 1
- Pluto's config.txt confusing HOT 3
- DHCP Client not running with USB-OTG ethernet HOT 3
- PlutoSDR not working after external clock HOT 19
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from plutosdr-fw.