HW: column transistors are backwards.

[anool]

HW: column transistors are backwards.

[GoogleCodeExporter]

See http://evilmadscience.com/KitInstrux/peggy2.pdf

Original comment by [email protected] on 7 Dec 2010 at 2:10

[GoogleCodeExporter]

Also, from 2N5401 data sheet it shows that they can only source 600 mA.  Thus 
the current starvation.  Our LEDs can draw 90 mA each * 10 = 900 mA.  That is 
without over driving them.  Maybe we should search out another transistor.

Original comment by [email protected] on 7 Dec 2010 at 2:13

[GoogleCodeExporter]

Transistor polarity seems OK on the schematic, but is reversed on the PCB 
layout. Here's what we can do :
1. Use the existing transistors we already ordered for ClockTWO boards.
2. Order out new transistors just for the ClockTWO boards. These seem a good 
fit : 
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=ZTX953-ND 
(Digi-Key Part Number ZTX953-ND )
3. For ClockTHREE, use these : 
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=KSH32CTFCT-ND 
(Digi-Key Part Number KSH32CTFCT-ND )

I tried a TIP32C PNP (Digi-Key Part Number TIP32CTU-ND) on the first column, 
and it seems to improve considerably. But, these are too big for ClockTWO board 
(TO-220 package)

Original comment by [email protected] on 7 Dec 2010 at 6:30

[GoogleCodeExporter]

Original comment by [email protected] on 11 Dec 2010 at 1:38

• Changed title: HW: column transistors are backwards.

[GoogleCodeExporter]

Closed on TJS final review

Original comment by [email protected] on 5 Jan 2011 at 12:41

• Changed state: Fixed