FLOW not an issue

[ascustomworks]

FLOW not an issue

[AScustomWorks]

Hi Robert!
The settings you can find on Flow switches are the ones I came up with after trying a lot of combinations, to make it work fine with CV and Audio signals, there's a compromise made as you found out, because of this:

Usually for CV signals(triggers and gates) you want the hard cut to happen so nothing sneaks in after the switch, on triggers and gates there are no clicks to be heard most of the time anyway and as you said, if present, it's controllable with an ADSR which is where usually this signals go to... so that's probably the reason you don't see a soft switch implemented in other modules.

Now, for the audio side of things if the switch cuts too fast you'll get audible clicks, even more noticeable when dealing with high frequency content(try with the change you made and you'll hear it).

So, I guess it all depends on what you are trying to accomplish and if it makes sense doing it different or not.

And yes, I believe that seeing how somebody else did things in code is the best way to learn new tricks and understand how things work, and even to come up with some ideas of your own... that's the nature of evolution. Sometimes you'll see ugly things too though hehe.

[alto777]

I'll close this non-issue with thanks and: if there is really anything ugly on the inside you have more than made up for it with the beauty you have on the outside.

a7