blob.h is missing

[rezaneam]

blob.h is missing

[peter-bloomfield]

You may need to configure the board library. Instructions are in the readme for this repo. Follow step 5 or 6 under "Simple Sample Instructions" for ESP8266 or ESP32.

hello @peter-bloomfield,
I'm facing the same issue as @rezaneam
C:\ ............ \Arduino\libraries\AzureIoTHub\src\iothub_client_ll_uploadtoblob.c:26:27: fatal error: internal/blob.h: No such file or directory

I checked out this same issue ( opened ) so I rechecked all Instructions as asked in the readMe but Yaa still error is the same.

@rezaneam if you solved out then point out here what we are missing

[rezaneam]

@SS-iot-devoted
I am using PlatformIO, I just add this line in the ini file then it works fine.

build_flags = -DDONT_USE_UPLOADTOBLOB -DUSE_BALTIMORE_CERT -DUSE_MBEDTLS

In which file you add these flags ?? in platform.local.txt or in platform.txt

[rezaneam]

@SS-iot-devoted As I mentioned I am using PlatformIO. So I can configure the build in the platformio.ini file.