Hysteresis not working

[ma-be]

Hysteresis not working

[balmli]

Hi,

The user interface for the themostat (the first screen) is a part of the mobile app for Homey, and might be a bit misleading.

Take a look at det second screen, if you slide to the right: The state will be "Yes" if the thermostat is heating, and "No" if it is not heating.

[ma-be]

The second screen is in sync with the first screen.
The state is "Yes" when the target temp is 21.0 degrees, the current temp is 20.8 degrees and the hysteresis is 0.5 degrees. I would think the state should be "No" in these circumstances. Am I wrong?
Thanks for clarification.

[balmli]

With a target of 21.0 and hysteresis of 0.5, the temp will vary between 20.5 and 21.5.

The state on the second screen (yes / no) will tell you if the thermostat is heating or not.

And the UI in the mobile app is nice, but a bit confusing, since it says "heating" if the target is higher than the temperature, and "cooling" if the target is lower than the temperature.

[ma-be]

Thank you for the explanation. Now I see and confirm your description.