[Enhancement] Head position after a print

[bcn3d]

[Enhancement] Head position after a print

[kitusmark]

Hi @Zorgonaute84
You can achieve that by modifiying the end.gcode text in Cura software as follows:

;End GCode
M104 S0                     ;extruder heater off
M140 S0                     ;heated bed heater off (if you have it)
G91                                    ;relative positioning
G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
G28 X0                              ;move X/Y to min endstops, so the head is out of the way
G1 Y290                   ;move Y Axis to the front
M84                         ;steppers off
G90                         ;absolute positioning
;{profile_string}

That way everytime a print ends, the Y axis will go to the front of the machine.

Hope it helps.

[Zorgonaute84]

Ah great idea, I didn't think about that ! The only things remain is we can't do that when we press stop during a print.

But I will implement that for end.gcode. thanks for the tips ;-)