Support for Sonoff Basic

[ksga]

Support for Sonoff Basic

[BernhardSchlegel]

Hey @ksga, I noticed you forked the repo. I'd suggest you create a branch called 'feature/sonoff-basic-support' on your fork. And commit all your changes there! Thanks!

[WireTownMan]

You don't have to check every pin for one wire, Sonoff only require gpio02 or gpio14.  Socket type wifi switches based on SWA1 hardware all use gpio14. Checking for a temperature sensor on pins 2 and 14 would allow the firmware to work on a large number of esp8266 based devices. ⁣David KENT​

On 23 Jan 2022, 15:03, at 15:03, Bernhard Schlegel ***@***.***> wrote: That's a great idea! Auto detecting the 1W pin is probably tricky. Maybe PIO has some built-in lookup tables which we can use, maybe as precompiler command? -- Reply to this email directly or view it on GitHub: #16 (comment) You are receiving this because you commented. Message ID:

***@***.***>

[BernhardSchlegel]

Hey ksga, thanks for reaching out! Can you provide a PR?

Thanks,
Bernhard.

[WireTownMan]

I have also changed the one wire pin in Main.cpp to use pin 2, re-compiled and flashed a sonoff basic R1 with V2.0 hardware. It works without any issues. I suggest that either two versions of the firmware are compiled or the main software is updated to detect the OneWire pin the temperature senor is connected. Detecting the OneWire pin used for temperature would provide compatibility with many ESP8266 devices not just sonoff TH16

[BernhardSchlegel]

That's a great idea! Auto detecting the 1W pin is probably tricky. Maybe PIO has some built-in lookup tables which we can use, maybe as precompiler command?