Naze32 REV6 and Xnova problems

[betaflight]

Naze32 REV6 and Xnova problems

[sniperxnl]

I tested it whit X4r Sbus and D4r-II with the D4R-II problems are almost gone

[borisbstyle]

I see you are using 2.1.5?

You should use 2.1.6 or 2.2.0 RC2 to have the latest version.

I use X4RSB too in all my quads and it works fine.

try also to disable rc_smoothing and see what it does doe you

I tested it whit X4r Sbus and D4r-II with the D4R-II problems are almost
gone

—
Reply to this email directly or view it on GitHub
https://github.com/borisbstyle/betaflight/issues/93#issuecomment-168304517
.

[sniperxnl]

Hello Boris,

Juist installed the new betaflight and set rc_smoothing = off.
I have the same problems on my D4R-II

Second test what i do was put a Naze32 Rev5 on it and the problems are gone.
I test a second Naze32 rev6 and got the same problems.
When i put the naze32 rev6 with the same setup on my other quad then only with Tiger 1806 2300KV the problems a gone.

No solution yet

[sniperxnl]

Blackbox: https://drive.google.com/file/d/0B1IxRV9-KVibNTQyazhHSmRVTGM/view?usp=sharing

[borisbstyle]

Maybe your rev6 boards are faulty.

Do they work with cleanflight or baseflight?
Op 1 jan. 2016 15:37 schreef "sniperxnl" [email protected]:

Blackbox:
https://drive.google.com/file/d/0B1IxRV9-KVibNTQyazhHSmRVTGM/view?usp=sharing

—
Reply to this email directly or view it on GitHub
https://github.com/borisbstyle/betaflight/issues/93#issuecomment-168311226
.

[sniperxnl]

Baseflight

[sniperxnl]

But it works great with tiger 1806 2300kv

[borisbstyle]

We can close this issue as it is not betaflight related. Same problem is on baseflight and cleanflight