Comments (11)
@sugaarK I understand that was the intent of the official/community/experimental flags, but people are still posting because they are confused. This is probably due to the preset being basically necessary while in experimental status before OSR4 was the default, combined with the popularity of the 4.3 pre-release stage.
@DusKing1 I'm looking at the preset in the configurator right now and all I see for a description is:
These settings are for BMI270 gyroscope only. With only these settings, the BMI270 will give a nice output and control performance. Please check the available options in this preset.
The text you are talking about is listed in the warning, people aren't getting that far before going on Facebook/discord and asking how to proceed. Maybe moving that verbiage to the description and making it "Duskings Advanced BMI270 filters", along with the already included "experimental" flag will make things a bit more clear.
Also, I'm not trying to "complain" I'm trying to help lower the number of questions in the community in regard to this popular preset.
from firmware-presets.
I'm for option N1, renaming it to something like... Idk to what but something that tells user. And of course adding more to description is good.
Option N2 - mark as 4.2, this can't be done because in 4.2 we didn't have a BMI support.
Option 3 - I think some people still might find it interesting to try non-osr mode. I haven't done it myself yet but planning :)
Blocking was def a weird thing by @DusKing1, maybe accidentally
from firmware-presets.
ive removed them
from firmware-presets.
The PRs in question are
from firmware-presets.
thanks for the comment Ryan, I agree with you. I think if we feature this preset we should update it.
from firmware-presets.
Maybe i blocked wrong users as i have received some spam on my other repos.
But the name for that is already "DusKing's BMI270 filter settings", IDK what you are complaining.
from firmware-presets.
Maybe i blocked wrong users as i have received some spam on my other repos.
But the name for that is already "DusKing's BMI270 filter settings", IDK what you are complaining.
I think it is confusing as users do not understand whether they need to select this preset or not...
Would you consider adjusting the preset to use the Betaflight filter defaults, with the Gyro Low Pass Filter slider instead of the PT2/PT3? It would make more sense...the gyro low pass slider can be changed to eg 0.5 and then the user could adjust if necessary...
from firmware-presets.
Maybe i blocked wrong users as i have received some spam on my other repos.
But the name for that is already "DusKing's BMI270 filter settings", IDK what you are complaining.I think it is confusing as users do not understand whether they need to select this preset or not...
Would you consider adjusting the preset to use the Betaflight filter defaults, with the Gyro Low Pass Filter slider instead of the PT2/PT3? It would make more sense...the gyro low pass slider can be changed to eg 0.5 and then the user could adjust if necessary...
It would be great if just adding an "Advanced"/"Extreme" would change the user's misconception (if it exists), however the fact is that the preset already has the "DusKing's" prefix, but according to the above statement, this does not change the so-called "user misconception".
No I wouldn't do it, a single static PT2/PT3 is enough. The default dynamic low pass will only mess up the final signal performance of the BMI270 in performance mode (according to the datasheet).
from firmware-presets.
The users should be able and I tell the difference between experimental and offical presets with the coloured flags that the presets have but even somthing as obvious as that goes over so many peoples heads!!
@DusKing1 maybe make it clear in the description that this is not suitable for the osr4 mode which is now stock in bf 4.3 where the bmi270 gyros can be run with more traditional filtering…
from firmware-presets.
@sugaarK please just check the preset in the latest master rather the links @rochford77 provided, they have the description as This preset also changes DLPF cutoff of BMI270 to 751Hz to provide the lowest latency.
from firmware-presets.
Fixed in #329
from firmware-presets.
Related Issues (19)
- For some of the option allow just a single one being selected HOT 7
- could be a chrome issue on my end but the dropdowns are buggy as hell. (see gif) HOT 1
- Remarks about RC Link /50 Hz ELRS Preset HOT 1
- Add presets for ELRS 915MHz @ 200Hz control link? HOT 18
- Information in default file is simply wrong and misleading HOT 6
- Presets don't work on subsequent RC versions HOT 4
- How to add new presets here? HOT 1
- Do you want to test this code? Here you have an automated build: HOT 1
- vtxtable powerlabels typo HOT 1
- Erls 1000hz presets HOT 6
- impossible to save 2 different pid preset with different filters HOT 3
- SpeedyBee VTX800 VTX Table HOT 3
- Betaflight Indexer NPM package HOT 1
- Wrong value for max power in "TBS Unify Pro32 Nano - SA 2.1" preset HOT 3
- Convert DJI_FPV-WTF_MSP-OSD to 4.5 Preset HOT 3
- request preset for VTX - Tmotor FT800 HOT 1
- UAV Tech Rates - whoop options invalid on Betaflight 4.5
- Required: TUNE defaults change HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from firmware-presets.