ESP32-S3-DevKitC-1 support

[danrodri88]

ESP32-S3-DevKitC-1 support

[Pazuzo]

Change Flash Address of bootloader to 0x0000

[julio-matarranz]

Dear, you can try to flash with "bin/bin ESP32-S3-devKitv1"

[danrodri88]

I already tried that, in first place, and devkit. And even tried others. None work. I can put in boot mode, flash all ok, but then, no AP on wifi list.

[julio-matarranz]

It should work with mentioned firmware because I have a board like yours and it worked. Maybe you need to erase all before flashing. After flashing push reset or replug it.

[danrodri88]

I did all of that and more. And nothing.

[sany3001]

I am using such a board successfully. I recommend to review flashing procedure.
Post here what you did.

[danrodri88]

I did it the same way I did with my lillygo TTgo 1.14, I cleaned the software it came with, then flashed the nerminer software. The only difference with this board is that I had to put it in download/boot mode before doing either the wipe or the nerminer soft flsh. Is that how you did it too?

[danrodri88]

Change Flash Address of bootloader to 0x0000

You´re the guy. Thanks my dear, it really worked. All the best to you.