When "No frames have been received, check error logs", reflect true FPS in system/API

[ghust]

When "No frames have been received, check error logs", reflect true FPS in system/API

[NickM-27]

This is already how frigate works. If a stream fails then the camera_fps will be set to 0. There can be cases where it shows no frames received because outdated frames are still being pocessed

[SuperMaximus1984]

Can "No frames have been received" message be displayed due to insufficient GPU power? System shows 100% load, but at the same time VRAM is 50% free. What do I need to upgrade in order to avoid this?
I have this message received during windy days, when most of my cameras that have trees in focus, seem to overload the system. I have TensorRT YoloV7x model running.

[NickM-27]

Yes, it could be due to the detector failing to process frames

[SuperMaximus1984]

Yes, it could be due to the detector failing to process frames

Hi Nick! Do you know if my GPU is a culprit here? I've tried replacing go2rtc with a different version, but no luck...

[NickM-27]

Do you have skipped frames on the system page while this happens?

[SuperMaximus1984]

Do you have skipped frames on the system page while this happens?

Yeah, I do. Not many, but 2-3 frames skipped - that's a regular picture.
I have GTX1650, which should be fine for 8 cameras, at least I though so lately... before I added another camera
Average picture per each camera (just as an example):

Overall status:

[NickM-27]

seems likely to be the issue then