Documentation updates for V0.61 version of board

[bondus]

Documentation updates for V0.61 version of board

[rlaferla]

Is the only bootloader option the 8Mhz clock or are there others? Are you flashing with Klipper?

[rlaferla]

There are three pins on the thermistor, what is the mapping?

[rlaferla]

[rlaferla]

I can't seem to flash it.

[rlaferla]

Newer Waveshare boards have a 12M clock and not a 8M!

[rlaferla]

I was able to get it to work. The crystal speed in menuconfig must be 8M because it's the Huvud crystal and NOT the Waveshare one (which was 12M in my case.)

[rlaferla]

SWDIO PA13 and CLK PA14???

[charlespick]

+1 would like the docs to be updated with more detailed information about how to use the new adxl, single canbus/power connector, multiple endstops and thermistors, and terminating the canbus using the pads on the back.

[dpoulson]

I was able to get it to work. The crystal speed in menuconfig must be 8M because it's the Huvud crystal and NOT the Waveshare one (which was 12M in my case.)

Could you say how you managed to get it to work? I'm having the same issues, using the same settings as you. Output from make flash is exactly the same as above. (with different size of firmware of course)