Cevelope crash if I install plugin C/C++ Unit testing feature

[Manoj-red-hat]

Cevelope crash if I install plugin C/C++ Unit testing feature

[PeterSommerlad]

Cevelop already comes with a unit testing support using CUTE. Ohter unit testing frameworks are not supposed to be supported.

[tcorbat]

Cevelop is based on the corresponding version of Eclipse CDT. Therefore, it should not be a problem to run the Unit Testing Support plug-in for CDT, as long as it works with that version. Our plug-ins are unlikely to interfere with that as they also build on top. Does that plug-in work properly with a vanilla CDT installation? Am Mi., 10. Feb. 2021 um 16:56 Uhr schrieb Peter Sommerlad < [email protected]>:

…

Cevelop already comes with a unit testing support using CUTE. Ohter unit testing frameworks are not supposed to be supported. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#125 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA2JYQLL54AAPE2QMFJLCZTS6KUBHANCNFSM4XNEXGRA> .

[tcorbat]

The only problem I could fathom, was if the installation of the plug-in somehow replaced the underlying CDT installation within Cevelop. However, that should not be possible AFAIK. Am Do., 11. Feb. 2021 um 08:20 Uhr schrieb Thomas Corbat < [email protected]>:

…

Cevelop is based on the corresponding version of Eclipse CDT. Therefore, it should not be a problem to run the Unit Testing Support plug-in for CDT, as long as it works with that version. Our plug-ins are unlikely to interfere with that as they also build on top. Does that plug-in work properly with a vanilla CDT installation? Am Mi., 10. Feb. 2021 um 16:56 Uhr schrieb Peter Sommerlad < ***@***.***>: > Cevelop already comes with a unit testing support using CUTE. Ohter unit > testing frameworks are not supposed to be supported. > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub > <#125 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AA2JYQLL54AAPE2QMFJLCZTS6KUBHANCNFSM4XNEXGRA> > . >

[Manoj-red-hat]

I think the issue is with below plugins.

After installing below plugins
https://www.cevelop.com/update/1.14.0
on the top of C/C++ unit test pluigin

Problem occurs, below is the screen-shot

[tcorbat]

The update-site you are referring to contains only our plug-ins, none of which is the C/C++ Unit Test Support plug-in. You might have installed it from: http://download.eclipse.org/tools/cdt/releases/9.10 Which we have included to have other dependencies resolved automatically when installing other plug-ins. You might try to reset the perspective and hope for good, as it looks like your workspace might be skewed (the missing icons and the label <C/C++> top right in your screenshot are an indicator for that). The stack trace in the Build Targets view indicates a problem in a CDT component. There is no hint of any of our plug-ins in the trace. Am Do., 11. Feb. 2021 um 13:29 Uhr schrieb Manoj Kumar < [email protected]>:

…

I think the issue is with below plugins. After installing below plugins https://www.cevelop.com/update/1.14.0 on the top of C/C++ unit test pluigin Problem occurs, below is the screen-shot [image: Screenshot from 2021-02-11 17-53-55] <https://user-images.githubusercontent.com/5130287/107636371-8a861480-6c92-11eb-950c-49087d6bdfd9.png> — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#125 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA2JYQOH3NALQCVHFUPMAE3S6PEUJANCNFSM4XNEXGRA> .

[Manoj-red-hat]

@tcorbat Ya so let me clear it.

Step 1. unzip cevelop-1.14.1-202002280945-linux.gtk.x86_64.tar.gz, and run cevelop everything works great.

Step 2: Install C/C++ unit framework

Select Plugin to install

Accept Plugin

After Restart everything works fine we get new C/C++ test module in configuration

Step 3: Now the Problamatic Step

Try to install cevelope plugins, after installing C/C++ unit test plugins

After Restart and installing cevelope plugins cdt got corrupt.

[FINALLY I drill down to following matrix]

Cevelope + C/C++ unit test plugin + cevelope plugins [ Not Working ]
Cevelope + C/C++ unit test plugin [ Working ]
Cevelope + cevelope plugins [ Working ]

[tcorbat]

Hm... interesting. I could not reproduce the problem on Windows. I'll check whether I can find someone to reproduce it on Linux. I looks like the complete CDT-part is skewed. Can you try to open the C/C++ Perspective (again) or reset the open perspective? Am Do., 11. Feb. 2021 um 18:03 Uhr schrieb Manoj Kumar < [email protected]>:

…

@tcorbat <https://github.com/tcorbat> Ya so let me clear it. Step 1. unzip cevelop-1.14.1-202002280945-linux.gtk.x86_64.tar.gz, and run cevelop everything works great. Step 2: Install C/C++ unit framework Select Plugin to install [image: step2] <https://user-images.githubusercontent.com/5130287/107669445-be276580-6cb7-11eb-81f3-4cc509c169fe.png> Accept Plugin [image: step2 2] <https://user-images.githubusercontent.com/5130287/107669467-c5e70a00-6cb7-11eb-8b45-257d422d1ed1.png> After Restart everything works fine we get new C/C++ test module in configuration [image: step2-4] <https://user-images.githubusercontent.com/5130287/107669497-cda6ae80-6cb7-11eb-90b5-5e241ee5055e.png> Step 3: After Problamatic Step Try to install cevelope plugins, after installing C/C++ unit test plugins [image: step3-3] <https://user-images.githubusercontent.com/5130287/107669664-fb8bf300-6cb7-11eb-9137-94853057eefd.png> After Restart and installing cevelope plugins cdt got corrupt. [image: step-final] <https://user-images.githubusercontent.com/5130287/107669722-09417880-6cb8-11eb-8faa-4e76a64d2df3.png> [FINALLY I drill down to following matrix] Cevelope + C/C++ unit test plugin + cevelope plugins [ Not Working ] Cevelope + C/C++ unit test plugin [ Working ] Cevelope + cevelope plugins [ Working ] — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#125 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA2JYQJIHTDQG2RT4U6XHN3S6QEV7ANCNFSM4XNEXGRA> .

[Manoj-red-hat]

Can you try to open the C/C++
Perspective (again) or reset the open perspective?

Noope it didn't worked , all in vain

The only solution which is left is shift+delete :(
Install again

[tcorbat]

I just had one of those "It can't be" moments. I tried to reproduce the described problem on a copy of my actual Cevelop installation, obviously. Everything worked and works fine in that copy with all the installed plug-ins. However, I just wanted to do something in my original installation, which is now completly broken, as described in the tricket. If someone told me this story, I would think, that I just confused the original and the copy in the first place. I double-checked that and I did not. The working copy has the whole installation history of the Unit Testing plug-in, while the broken (original) installation has not been changed since 28. February of 2020. Right now I'm totally confused about how this can actually happen. I will further investigate the installations. And check for the missing plug-ins. Am Fr., 12. Feb. 2021 um 18:59 Uhr schrieb Manoj Kumar < [email protected]>:

…

Can you try to open the C/C++ Perspective (again) or reset the open perspective? Noope it didn't worked , all in vain The only solution which is left is shift+delete :( Install again — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#125 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA2JYQKOOX7JR334HD3ET7LS6VUATANCNFSM4XNEXGRA> .

[tcorbat]

I figured out that in my original installation the following plug-ins were missing compared to the plug-ins available in a "new" Cevelop archive: - javax.activation_1.1.0.v201211130549.jar - javax.xml.bind_2.2.0.v201105210648.jar - javax.xml.stream_1.0.1.v201004272200.jar I have no clue how they got removed cross-installation. However, when I re-add them to my broken Cevelop it works again. Am Do., 18. Feb. 2021 um 11:24 Uhr schrieb Thomas Corbat < [email protected]>:

…

I just had one of those "It can't be" moments. I tried to reproduce the described problem on a copy of my actual Cevelop installation, obviously. Everything worked and works fine in that copy with all the installed plug-ins. However, I just wanted to do something in my original installation, which is now completly broken, as described in the tricket. If someone told me this story, I would think, that I just confused the original and the copy in the first place. I double-checked that and I did not. The working copy has the whole installation history of the Unit Testing plug-in, while the broken (original) installation has not been changed since 28. February of 2020. Right now I'm totally confused about how this can actually happen. I will further investigate the installations. And check for the missing plug-ins. Am Fr., 12. Feb. 2021 um 18:59 Uhr schrieb Manoj Kumar < ***@***.***>: > Can you try to open the C/C++ > Perspective (again) or reset the open perspective? > Noope it didn't worked , all in vain > > The only solution which is left is shift+delete :( > Install again > > — > You are receiving this because you were mentioned. > Reply to this email directly, view it on GitHub > <#125 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AA2JYQKOOX7JR334HD3ET7LS6VUATANCNFSM4XNEXGRA> > . >