Comments (8)
Just to update, I do not have any log files in the /var/log/lora*
directories.
Viewing the MQTT stream for gateways has not shown any "txInfo" JSON structures.
from chirpstack-gateway-bridge.
When your system uses systemd, you can see the logfiles with journalctl -f -n 100 -u lora-gateway-bridge
Please note that when nothing has been published to the gateway/[MAC]/tx
MQTT topic, no data (PULL_RESP
) will be send to the gateway.
from chirpstack-gateway-bridge.
I've been queueing via the RESTful web interface, not the MQTT, so I'll look into doing it that way.
(Note: This is with the web interface) I queued a packet, and the below is what journalctl showed from when the packet was queued and when it was approximately de-queued:
Jul 17 12:39:19 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:39:19-04:00" level=info msg="gateway: received udp packet from gateway" addr=10.1.107.251:49053 protocol_version=1 type=PullData
Jul 17 12:39:19 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:39:19-04:00" level=info msg="gateway: sending udp packet to gateway" addr=10.1.107.251:49053 protocol_version=1 type=PullACK
Jul 17 12:39:31 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:39:31-04:00" level=info msg="gateway: received udp packet from gateway" addr=10.1.107.251:49053 protocol_version=1 type=PullData
Jul 17 12:39:31 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:39:31-04:00" level=info msg="gateway: sending udp packet to gateway" addr=10.1.107.251:49053 protocol_version=1 type=PullACK
Jul 17 12:39:43 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:39:43-04:00" level=info msg="gateway: received udp packet from gateway" addr=10.1.107.251:49053 protocol_version=1 type=PullData
Jul 17 12:39:43 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:39:43-04:00" level=info msg="gateway: sending udp packet to gateway" addr=10.1.107.251:49053 protocol_version=1 type=PullACK
Jul 17 12:39:55 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:39:55-04:00" level=info msg="gateway: received udp packet from gateway" addr=10.1.107.251:49053 protocol_version=1 type=PullData
Jul 17 12:39:55 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:39:55-04:00" level=info msg="gateway: sending udp packet to gateway" addr=10.1.107.251:49053 protocol_version=1 type=PullACK
Jul 17 12:40:08 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:40:08-04:00" level=info msg="gateway: received udp packet from gateway" addr=10.1.107.251:49053 protocol_version=1 type=PullData
Jul 17 12:40:08 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:40:08-04:00" level=info msg="gateway: sending udp packet to gateway" addr=10.1.107.251:49053 protocol_version=1 type=PullACK
Jul 17 12:40:13 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:40:13-04:00" level=info msg="gateway: received udp packet from gateway" addr=10.1.107.251:34629 protocol_version=1 type=PushData
Jul 17 12:40:13 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:40:13-04:00" level=info msg="gateway: rxpk packet received" addr=10.1.107.251:34629 data=QAQDAgEA6mUB306sYGju mac=fffeb827ebf64bf7
Jul 17 12:40:13 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:40:13-04:00" level=info msg="backend: publishing packet" topic="gateway/fffeb827ebf64bf7/rx"
Jul 17 12:40:13 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:40:13-04:00" level=info msg="gateway: sending udp packet to gateway" addr=10.1.107.251:34629 protocol_version=1 type=PushACK
Jul 17 12:40:20 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:40:20-04:00" level=info msg="gateway: received udp packet from gateway" addr=10.1.107.251:49053 protocol_version=1 type=PullData
Jul 17 12:40:20 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:40:20-04:00" level=info msg="gateway: sending udp packet to gateway" addr=10.1.107.251:49053 protocol_version=1 type=PullACK
Jul 17 12:40:26 theserver lora-gateway-bridge[7258]: time="2017-07-17T12:40:26-04:00" level=info msg="gateway: received udp packet from gateway" addr=10.1.107.251:34629 protocol_version=1 type=PushData
from chirpstack-gateway-bridge.
I'm trying to use paho for my client and I created the following:
#!/usr/bin/python
import paho.mqtt.client as mqtt
mac="fffeb827ebf64bf7"
payload='{
"reference": "abcd1234",
"confirmed": true,
"fPort": 1,
"data": "AAAAA"
}'
client = mqtt.Client()
client.connect("127.0.0.1")
client.subscribe("gateway/"+mac+"/tx")
client.publish("gateway/"+mac+"/tx",payload)
I ran it, but nothing "tx" showed up in the journalctl, mosquitto_sub, or my sniffer logs. :-/
Am I creating the payload correctly?
from chirpstack-gateway-bridge.
Forgive me, but more mysteries...
Something happened where my python sniffer is now reporting a PullResp:
PUSH_ACK'd
PULL_RESP !!!!!!
Payload: {"imme":false,"tmst":3335476076,"freq":923.3,"rfch":0,"powe":20,"modu":"LORA","datr":"SF10BW125","codr":"4/5","ipol":true,"size":16,"data":"oAQDAgEQDQABNVfqU5D4DQ=="}}
The journalctl is also showing similar traffic:
[snip] lora-gateway-bridge[7258]: time="2017-07-18T17:20:28-04:00" level=info msg="gateway: rxpk packet received" addr=10.1.107.251:46750 data="QAQDAgEAVxcB/aUg5Ykn" mac=fffeb827ebf64bf7
[snip] lora-gateway-bridge[7258]: time="2017-07-18T17:20:28-04:00" level=info msg="backend: publishing packet" topic="gateway/fffeb827ebf64bf7/rx"
[snip] lora-gateway-bridge[7258]: time="2017-07-18T17:20:28-04:00" level=info msg="gateway: sending udp packet to gateway" addr=10.1.107.251:46750 protocol_version=1 type=PushACK
[snip] lora-gateway-bridge[7258]: time="2017-07-18T17:20:28-04:00" level=info msg="backend: packet received" topic="gateway/fffeb827ebf64bf7/tx"
[snip] lora-gateway-bridge[7258]: time="2017-07-18T17:20:28-04:00" level=info msg="gateway: sending udp packet to gateway" addr=10.1.107.251:35634 protocol_version=1 type=PullResp
Not sure what was the cause of this, unfortunately. :( I made a change to the data field in the web interface with a different Base64 value.
However, also odd is that the web interface API is not showing the queued downlink packets popping out of the queue. So the gateway is getting the same downlink packet over and over again, but the DownlinkQueue is showing that it's not de-queueing. the only way I can get it out is to issue a RESTful delete, and it will stop sending the PullResp packets.
update: I forced the downlink packet to be "confirmed:true" so that's probably why it didn't get cleared out of the queue... The mote didn't ack, and so the server holds the packet in the queue.
I haven't even tried to see if there's a transmission, but the mDot is still indicating that it's not getting any downlink packets. Maybe there's a parameter in setting up the mDot that's incorrect... :-/
from chirpstack-gateway-bridge.
In case of confirmed: true
it is not surprising that the frame gets send over and over again. The node did ACK the frame, so the server sees the transmission as not successful. Please check your frame counters (which could be the reason why the mDot rejects the frame).
from chirpstack-gateway-bridge.
Ok, I will check the mDot...
Ok! I followed the mDot's uplink/downlink counters.
The downlink counter is increasing on the Loraserver UI, but the mDot's downlink is staying "0".
I checked the uplink to make sure I was accessing the correct object, and the uplink counter matches the uplink reported in the loraserver UI.
from chirpstack-gateway-bridge.
@brocaar Another update. I think it's mDot's timing, or a failure to set up correct parameters for receiving the downlink.
I have GQRX looking at 923.3 (as specified for US915 RX2), and it shows that a transmit burst is happening. I'm sending out uplinks with a request for an ACK, and as far as I know, the server is transmitting the ACK. However, the mDot debugging will declare that it didn't receive an ACK, thus "failed to send to gateway", and it also can't read the downlinks, saying that "the [recv] operation timed out". (error #-5)
So I'll close this, but I hope that someone with an mDot has some hints on how to get downlink working with mDot/mbed v5... but as of right now it's not caused by your project.
from chirpstack-gateway-bridge.
Related Issues (20)
- Wrong FSK frequency for AS923 in basicstation
- No reconnect if the initial connection fails because certificate has expired (v3.13.3) HOT 8
- Make "MQTT Client ID as a gateway ID source" optional HOT 1
- [Build] missing go.sum entries HOT 2
- Gateway Bridge not starting after reboot under Multitech v6.0.0 HOT 2
- Gateway bridge on Kerlink iStation only forwards a few messages after bootin, then stops publishing to MQTT HOT 2
- Issue with docker compose GW building HOT 1
- Apply filtering with concentratord backend
- Long interleaving CodeRate is not support on semtechudp downlink. HOT 1
- windows_amd64.tag.gz
- ConfigMap integration.mqtt.auth.generic.servers value is not used HOT 6
- 3.14.3 Gets into a mqtt reconnection loop HOT 8
- MutualTLS error="not Authorized"
- Basic Station backend: FineTimeSinceGpsEpoch missing from uplink event? HOT 2
- Add bcning field in router_config response
- Integration ThingsBoard doesn't work
- Chirpstack v4.6.0 missing uplink info latest gw bridge tag HOT 7
- ChirpStack Gateway Bridge binds to udp6 only HOT 4
- class C downlink issues HOT 4
- Chirpstack-gateway-bridge, gateway 16 channels (basic station, SX1302, SX1303) HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from chirpstack-gateway-bridge.