Not working on Alveo U50DD(Alveo U50-ES3)

[corundum]

Not working on Alveo U50DD(Alveo U50-ES3)

[alexforencich]

If the verilog-ethernet and verilog-pcie reference designs work, then corundum should also work as it uses the same interfaces in exactly the same way. So that points to either a transient issue of some sort, or a software issue. What is the link partner? Do you see any inbound traffic in tcpdump (tcpdump -i <iface> -Q in) on either end of the link?

[alexforencich]

Also, I have been slowly piecing together https://github.com/corundum/corundum/wiki/Frequently-Asked-Questions, have you tried everything on there?

[Perlmint]

Thanks for your fast response.
I feel sorry about it was my network setup issue. Corundum works nicely on AU50DD.

Below is my wrong network setup.
I installed 10g NIC and AU50DD on the same machine. I assigned static IPs with 192.168.254.x to them. In this setup, tcpdump shows incoming packets on each interface. But, Failed to receive via socket and No response to ping.

I moved 10g NIC to another machine. After moving, It works.