Comments (16)
I have not recorded the Gpredict log when the software crashed, but may-be the current log could help.
There are several lines like these ones:
2023/05/22 07:36:05|1|get_current_pass: Returning a pass for INSPIRE-SAT 7 that ends before the seeded time.
2023/05/22 18:21:58|1|get_current_pass: Returning a pass for UVSQSAT that ends before the seeded time.
Hereafter the full log:
gpredict.log
Best regards.
Emmanuel
from gpredict.
Don't know if it could help, hereafter an exemple of the many crash reports saved by Windows:
Report-wer.txt
Best regards.
Emmanuel
from gpredict.
#1 What do you have for your pass conditions?
#2 Please run rotctld with this added: -vvvvv >log.txt 2>&1
Then we can make sure it's no a rotctld problem.
from gpredict.
Hi Michael,
Thanks for your comment, hereafter the pass conditions:
And hereafter the rotator configuration:
Rotctl is usualy used with:
"C:\Program Files (x86)\hamlib-w64-4.4\bin\rotctld" -vvvv -m 603 -r COM6 -s 4800 -t 4533 -C timeout=2000
Call to Rotctl have been modified has suggested (-vvvvv >log.txt 2>&1), hereafter the beginin of the log:
log_20230929.txt
I will post the updated log as soon as next crash.
Thanks for your help :-)
Best regards,
Emmanuel
from gpredict.
Hi Michael,
I have captured a crash in the log (if needed I can share the entire file on an ftp):
log_20231002_Extract.txt
At line 398122 you can find this:
fscanf: Invalid argument
fscanf: parsing '
' with '%c'
Connection closed from ::ffff:127.0.0.1:61324
Connection opened from ::ffff:127.0.0.1:51123
Best regards,
Emmanuel
from gpredict.
from gpredict.
Hello Mike,
Thanks, I have updated hamlib to "w64-4.5.5" version.
Waiting now for next satellites pass.
Best regards,
Emmanuel
from gpredict.
from gpredict.
Hello Mike,
Thanks, I have installed "hamlib-w64-4.6~git-20231003-c9344070".
Gpredict has also crashed with "hamlib-w64-4.5.5", hereafter the rotctld log:
log_20231006a - Beginning of file.txt
log_20231006b - End of file.txt
With a end like this:
write_block(): TX 3 bytes, method=2
0000 43 32 0d C2.
read_string_generic called, rxmax=32 direct=1, expected_len=1
read_string_generic(): RX 15 characters, direct=1
0000 41 5a 3d 30 39 32 20 20 45 4c 3d 30 30 30 0d AZ=092 EL=000.
gs232b_rot_get_position: (az, el) = (92, 0)
rot_get_position: got az=92.00, el=0.00
fscanf: Invalid argument
fscanf: parsing '
' with '%c'
Connection closed from ::ffff:127.0.0.1:54638
Waiting for next satellites pass,
Best regards.
Emmanuel
from gpredict.
from gpredict.
Hi Mike,
Thanks, nightly build downloaded today and just installed.
Begining of log is:
rotctld, Hamlib 4.6~git 2023-10-08T22:18:16Z SHA=e68b6f 64-bit
Emmanuel
from gpredict.
Hello Mike,
Gpredict has crashed yesterday with the nightly built "Hamlib 4.6~git 2023-10-08T22:18:16Z".
The beginning of rotctld log is:
log_20231011b - Beginning of file.txt
And the end with the unexpected gpredict crash is:
log_20231011c - End of file.txt
Best regards,
Emmanuel
from gpredict.
from gpredict.
Hello Mike,
No, I'm using the already compiled EXE available on https://github.com/csete/gpredict/releases
Version is "gpredict-win32-2.3.37".
If you send me a new EXE I can launch it in our ground station.
Best regards,
Emmanuel
from gpredict.
Hi Mike,
Please find hereafter some other log of rotctld (Hamlib 4.6~git 2023-10-08T22:18:16Z) with the unexpected closure of Gpredict.
log_20231018_Extract.txt
The last one, at the end of the file, is not EL=000. But probably same problem since EL=179 is the opposite position (gpredict EL configured with EL in [0° ; 180°] range).
I have not recorded gpredict internal log, will be done next time, but should be something like this previous one:
2023/05/22 07:36:05|1|get_current_pass: Returning a pass for INSPIRE-SAT 7 that ends before the seeded time.
2023/05/22 18:21:58|1|get_current_pass: Returning a pass for UVSQSAT that ends before the seeded time.
Do you know where does come from "that ends before the seeded time" trace in gpredict?
Best regards,
Emmanuel
from gpredict.
Please try this package
https://www.dropbox.com/scl/fi/19300vq5wdgwg7vrywyrp/bin.zip?rlkey=j8tsgk0djg342y0yi9ss2j4e2&dl=0
from gpredict.
Related Issues (20)
- Gpredict 2.3-72-gc596101-3 does not update galileo.cat HOT 2
- Wrong Geostationary satellites Az El computation HOT 5
- Radio controller doesn't stop recording HOT 1
- no frequencies in radio control with more SATs in one module
- Crash After Closing Antenna Control and Attempting to Open Menu
- FT-857D RX frequency increments for satellites with identical RX and TX frequencies HOT 11
- gpredict does not build with MUSL libc
- creating new modules fail HOT 3
- Start Gpredict fullscreen HOT 2
- Rotator cycle value change does nothing
- Missing data in pass details polar tab
- Use of local time instead of UTC by default HOT 1
- Zenith Satellite Rotator Tracking HOT 2
- How to turn off satellite ground visibility circles and satellite names in Map View HOT 3
- "METEOR M2-3" data is missing HOT 11
- TEVEL-6 sat missing HOT 4
- will not open on wayland HOT 1
- Confusing release versions across the downstream package ecosystem HOT 2
- "https" prevents TLE data from downloading HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from gpredict.