Comments (11)
But the downgrade did work? Ie. the firmware version shown is now 1.0.01?
Regarding the installer. you are using the ready binary provided in the releases section of this project I suppose...?
from owrt-ubi-installer.
Yes, it's now 1.0.01. Yes, it's downloaded here.
from owrt-ubi-installer.
May be I should give more details. After downgrading, I uploaded the recovery-installer file, and the router seemed to be bricked (didn't come to live with power cycling). I then applied a hardware reset (strangely I wrongly held the wps button and power on and still fine) and to bring it to live again. After this, I tried to flash the file again, "image file is incorrect", then I flashed the recover (only) file, but also "image file is incorrect".
from owrt-ubi-installer.
That's very odd. Esp. the part that you succeeded to upload the recovery-installer file and then the router would not start it. I hope they didn't lock update the bootloader, but 1.0.01 is also not signed in any special way from what I can tell, so it's probably somethign more simple.
The best would be if you can connect a USB-to-serial converter to the internal (3.3V level) serial console of the device, so we can see what's actually going on...
from owrt-ubi-installer.
do I need to open the plastic case for that serial console?
from owrt-ubi-installer.
Yes, you do need to remove the 4 screws hidden underneath the sticker on the bottom and then slide out the board to find the JST PH 2.0 6-pin connector which is the serial port. See also the OpenWrt wiki for details.
from owrt-ubi-installer.
Yesterday, I upgraded the router to new stock firmware again, just to try whether my router can flash image, it succeeded. But today, I want try once more to downgrade the router to 1.0, I couldn't do it anymore saying the image is incorrect again. Does it mean I can no longer flash this router to openwrt? If so, I need to buy another one for openwrt and use this router elsewhere.
from owrt-ubi-installer.
It more sounds like something is wrong with this specific device. However, as I said, only with the serial console connected we can shed light onto this.
from owrt-ubi-installer.
Thank you for your help. It really takes time and courage to open it up, but I think I will do it later, and ask for your help again. In fact I have a tp-link C7 running openwrt for years, and still working very well. Should I close this thread by now? Or you have some other suggestion for me to try except opening it up?
from owrt-ubi-installer.
I'm curiously awaiting the serial bootlog to be posted here ;)
from owrt-ubi-installer.
Hi dangowrt,
I'm writing to let you know that I do the conversion today again, and everything's going smoothly. Probably sth I've done wrong last time. I have the new toy to play now.
Thank you for all the help.
from owrt-ubi-installer.
Related Issues (20)
- Update Pre-Built Files HOT 2
- OpenWRT UBI Installer for more routers HOT 2
- Attended sysupgrade doesn't upgrade to latest OpenWrt version HOT 14
- Flashed *-ubi-squashfs-sysupgrade.itb, router is non-responsive, power light blinking white HOT 3
- no lights when powering on,am i bricked HOT 16
- Unable to create UBI Installer Images from OpenWrt MAIN SNAPSHOT r25339-35a5e62da7 ImageBuilder HOT 5
- Rookie installs debugging build by accident and cannot reverse it. HOT 3
- 5Ghz wireless devices is miss.
- Stuck on the same production image after commit 6aec3c7 HOT 3
- build config and dts HOT 1
- Belkin RT3200 Stuck in Recovery Mode can only force upgrade (which all fail) HOT 3
- Downgrade from v1.1.1 to v1.0.3 HOT 2
- Restoring Vendor Firmware Failure HOT 1
- some help!
- build_installer.sh script is failing to build images due to OpenWrt main / master branch changing from tar.xz to tar.zst (zstandard aka zstd) compression
- I need help with some issues. My device light is off. HOT 5
- Authentication loop
- Missing instructions on how to upgrade TF-A/U-Boot to newer versions. HOT 5
- The official version v22.03.7 is not available under installer version 1.0.2
- Deletion of bl2-for-mtk_uartboot.bin HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from owrt-ubi-installer.