Exixe14 BOM not matching PCB

[dekunukem]

Exixe14 BOM not matching PCB

[dekuNukem]

Is R28 on the bottom layer? If so it is not needed. No components are soldered on bottom side.

[eben80]

Hi,
Yes the highest R value on the top layer is R24.
So none of the 5 resistor pads need to be populated on the bottom?
I followed the markings on the resistors of your top layer with the posted photo.
Do you by any chance have a photo of the completed bottom of an Exixe14?
Thank you for an awesome design.

[dekuNukem]

There are no components on the bottom layer at all, let me see if i can find a photo later today.

[eben80]

OK thank you.

…

On Sun, 23 Feb 2020, 12:51 dekuNukem, ***@***.***> wrote: There are no components on the bottom layer at all, let me see if i can find a photo later today. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#11?email_source=notifications&email_token=AATNONDJOGUXNQFHYLCWR33REJPM5A5CNFSM4KZTDVCKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEMVZY2Q#issuecomment-590060650>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AATNONGAL4GSPPJ2E54X5BTREJPM5ANCNFSM4KZTDVCA> .

[dekuNukem]

Here's a photo of the bottom side:

[eben80]

Great thank you, So just to confirm : Even though there's pads for resistors on the bottom, they should not be populated when assembling my own.

…

On Sun, 23 Feb 2020, 17:27 dekuNukem, ***@***.***> wrote: Here's a photo of the bottom side: <https://camo.githubusercontent.com/39279ceb697bb45de6e1c541897ceace8343acaf/68747470733a2f2f692e696d6775722e636f6d2f365868394878782e6a7067> — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#11?email_source=notifications&email_token=AATNONFTWUCYSGGDV3Y7FATREKPXPA5CNFSM4KZTDVCKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEMWAI3Q#issuecomment-590087278>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AATNONBW3ABDQENW44JDYZLREKPXPANCNFSM4KZTDVCA> .

[dekuNukem]

that is correct.

[eben80]

Thank you very much.