Comments (11)
drohm
commented on July 22, 2024
Do you have python 3 installed? Try running:
python3
to see if python 3 launches. If it doesn't, install python 3 with:
sudo apt-get install python3
and install pip3:
sudo apt-get install python3-pip
Doug
from pi-sht1x.
drohm
commented on July 22, 2024
Also, after you get python3 and pip3 installed, use the second method of installing pi-sht1x:
pip3 install pi-sht1x
Doug
from pi-sht1x.
barislav
commented on July 22, 2024
Hi Doug,
Thanks for your prompt reply.
Python3 was installed and I've now installed pip3.
When I enter:
pip3 install pi-sht1x
I receive an error saying no such file or directory README.rst
from pi-sht1x.
drohm
commented on July 22, 2024
I've made a fix and uploaded a new version to PyPI - 1.0.8. Try doing the install again using the same command, which will pull the latest version. Let me know if that clears up the error.
from pi-sht1x.
barislav
commented on July 22, 2024
The install worked this time thank you.
This is my full code for to the program:
Under the program is the error message i recieve when i run the program.
I appreciate all your help, anymore pointers would be greatly apreciated.
Kind regards.
from time import sleep
import RPi.GPIO as GPIO
from pi_sht1x import SHT1x
DATA_PIN = 18 ## physical pin 12
SCK_PIN = 23 ## physical pin 16
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BCM) as sensor:
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
print(sensor)
ERROR MSG:
pi@raspberrypi ~/examples $ sudo python3 humidity.py
Traceback (most recent call last):
File "humidity.py", line 8, in
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BOARD) as sensor:
File "/usr/local/lib/python3.2/dist-packages/pi_sht1x/sht1x.py", line 78, in init
self.initialize_sensor()
File "/usr/local/lib/python3.2/dist-packages/pi_sht1x/sht1x.py", line 157, in initialize_sensor
self._write_status_register(mask)
File "/usr/local/lib/python3.2/dist-packages/pi_sht1x/sht1x.py", line 454, in _write_status_register
self._send_command(measurement=False)
File "/usr/local/lib/python3.2/dist-packages/pi_sht1x/sht1x.py", line 254, in _send_command
self._get_ack(command_name)
File "/usr/local/lib/python3.2/dist-packages/pi_sht1x/sht1x.py", line 397, in _get_ack
raise SHT1xError(message)
pi_sht1x.sht1x.SHT1xError: SHT1x failed to properly receive command [['WriteStatusRegister'] - 00000110]
from pi-sht1x.
drohm
commented on July 22, 2024
Double-check your pin connections. The error indicates that its not communicating with the sensor properly. Are you using 3.3V or 5V to power the sensor?
Could you also check the log file? Do this:
ls -al /usr/local/lib/python3.2/dist-packages/pi_sht1x
you should see a file called pi_sht1x.log If you can, please paste the contents here.
from pi-sht1x.
drohm
commented on July 22, 2024
I just realized that in your initial post, you mentioned you're using the SHT71 sensor. I don't believe that sensor will work with this library. This library was specifically written to work with the SHT1x sensors (SHT10, SHT11, and SHT15). I'm not sure how compatible the SHT71 is to this series, I'd have to look at the data sheet. Most likely it isn't.
from pi-sht1x.
barislav
commented on July 22, 2024
Ah yes sorry, I didn't realise that. Thanks for pointing that out. I'll purchase a SHT1x sensor if this doesn't work out.
May i also ask if my interpret is correct in that the BCM pin 18 is equal to the physical pin 12 etc..
Thanks again for your help.
For the record this is the contents of the pi_sht1x.log
[2015-02-17 19:42:08,612] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 19:42:08,613] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 19:42:08,614] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 19:42:08,615] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 19:42:08,616] sht1x: init:83 INFO Initial configuration:
Data Pin: 18
Clock Pin: 23
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 19:42:08,617] sht1x: _get_ack:393 INFO Command ['Temperature'] [00000011] acknowledged: 3
[2015-02-17 19:42:08,617] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['Temperature'] - 00000011]
[2015-02-17 19:42:08,618] sht1x: exit:91 INFO GPIO channel function status:
Data pin [18]: GPIO.IN
Clock pin [23]: GPIO.OUT
[2015-02-17 19:42:08,619] sht1x: exit:94 ERROR Exception in with block: <class 'pi_sht1x.sht1x.SHT1xError'>
SHT1x failed to properly receive command [['Temperature'] - 00000011]
<traceback object at 0x76a13e18>
[2015-02-17 19:42:58,090] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 19:42:58,093] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 19:42:58,095] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 19:42:58,097] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 19:42:58,099] sht1x: init:83 INFO Initial configuration:
Data Pin: 18
Clock Pin: 23
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 19:42:58,101] sht1x: _get_ack:393 INFO Command ['Temperature'] [00000011] acknowledged: 3
[2015-02-17 19:42:58,103] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['Temperature'] - 00000011]
[2015-02-17 19:42:58,104] sht1x: exit:91 INFO GPIO channel function status:
Data pin [18]: GPIO.IN
Clock pin [23]: GPIO.OUT
[2015-02-17 19:42:58,106] sht1x: exit:94 ERROR Exception in with block: <class 'pi_sht1x.sht1x.SHT1xError'>
SHT1x failed to properly receive command [['Temperature'] - 00000011]
<traceback object at 0x7695fe18>
[2015-02-17 19:54:12,845] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 19:54:12,848] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 19:54:12,849] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 19:54:12,850] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 19:54:12,851] sht1x: init:83 INFO Initial configuration:
Data Pin: 18
Clock Pin: 23
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 19:54:12,852] sht1x: _get_ack:393 INFO Command ['Temperature'] [00000011] acknowledged: 3
[2015-02-17 19:54:12,853] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['Temperature'] - 00000011]
[2015-02-17 19:54:12,853] sht1x: exit:91 INFO GPIO channel function status:
Data pin [18]: GPIO.IN
Clock pin [23]: GPIO.OUT
[2015-02-17 19:54:12,854] sht1x: exit:94 ERROR Exception in with block: <class 'pi_sht1x.sht1x.SHT1xError'>
SHT1x failed to properly receive command [['Temperature'] - 00000011]
<traceback object at 0x7693adc8>
[2015-02-17 19:55:11,645] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 19:55:11,647] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 19:55:11,648] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 19:55:11,649] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 19:55:11,649] sht1x: init:83 INFO Initial configuration:
Data Pin: 18
Clock Pin: 23
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 19:55:11,650] sht1x: _get_ack:393 INFO Command ['Temperature'] [00000011] acknowledged: 3
[2015-02-17 19:55:11,651] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['Temperature'] - 00000011]
[2015-02-17 19:55:11,652] sht1x: exit:91 INFO GPIO channel function status:
Data pin [18]: GPIO.IN
Clock pin [23]: GPIO.OUT
[2015-02-17 19:55:11,652] sht1x: exit:94 ERROR Exception in with block: <class 'pi_sht1x.sht1x.SHT1xError'>
SHT1x failed to properly receive command [['Temperature'] - 00000011]
<traceback object at 0x76936dc8>
[2015-02-17 20:07:22,897] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 20:07:22,899] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 20:07:22,900] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 20:07:22,900] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 20:07:22,901] sht1x: init:83 INFO Initial configuration:
Data Pin: 18
Clock Pin: 23
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 20:07:22,902] sht1x: exit:91 INFO GPIO channel function status:
Data pin [18]: GPIO.IN
Clock pin [23]: GPIO.OUT
[2015-02-17 20:07:22,902] sht1x: exit:94 ERROR Exception in with block: <class 'NameError'>
name 'temp' is not defined
<traceback object at 0x76a0ed00>
[2015-02-17 20:07:46,741] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 20:07:46,743] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 20:07:46,744] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 20:07:46,745] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 20:07:46,745] sht1x: init:83 INFO Initial configuration:
Data Pin: 18
Clock Pin: 23
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 20:07:46,746] sht1x: exit:91 INFO GPIO channel function status:
Data pin [18]: GPIO.IN
Clock pin [23]: GPIO.OUT
[2015-02-17 20:07:46,747] sht1x: exit:94 ERROR Exception in with block: <class 'NameError'>
name 'temp' is not defined
<traceback object at 0x769d1d28>
[2015-02-17 20:08:11,860] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 20:08:11,861] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 20:08:11,862] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 20:08:11,863] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 20:08:11,864] sht1x: init:83 INFO Initial configuration:
Data Pin: 18
Clock Pin: 23
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 20:08:11,865] sht1x: _get_ack:393 INFO Command ['Temperature'] [00000011] acknowledged: 3
[2015-02-17 20:08:11,866] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['Temperature'] - 00000011]
[2015-02-17 20:08:11,866] sht1x: exit:91 INFO GPIO channel function status:
Data pin [18]: GPIO.IN
Clock pin [23]: GPIO.OUT
[2015-02-17 20:08:11,867] sht1x: exit:94 ERROR Exception in with block: <class 'pi_sht1x.sht1x.SHT1xError'>
SHT1x failed to properly receive command [['Temperature'] - 00000011]
<traceback object at 0x769bfda0>
[2015-02-17 21:42:33,279] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 21:42:33,281] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 21:42:33,282] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 21:42:33,283] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 21:42:33,284] sht1x: init:83 INFO Initial configuration:
Data Pin: 18
Clock Pin: 23
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 21:42:33,285] sht1x: _get_ack:393 INFO Command ['Temperature'] [00000011] acknowledged: 3
[2015-02-17 21:42:33,286] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['Temperature'] - 00000011]
[2015-02-17 21:42:33,286] sht1x: exit:91 INFO GPIO channel function status:
Data pin [18]: GPIO.IN
Clock pin [23]: GPIO.OUT
[2015-02-17 21:42:33,287] sht1x: exit:94 ERROR Exception in with block: <class 'pi_sht1x.sht1x.SHT1xError'>
SHT1x failed to properly receive command [['Temperature'] - 00000011]
<traceback object at 0x1c5ddf0>
[2015-02-17 21:48:44,019] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 21:48:44,020] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 21:48:44,021] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 21:48:44,022] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 21:48:44,023] sht1x: init:83 INFO Initial configuration:
Data Pin: 18
Clock Pin: 23
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 21:48:44,024] sht1x: _get_ack:393 INFO Command ['Temperature'] [00000011] acknowledged: 3
[2015-02-17 21:48:44,024] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['Temperature'] - 00000011]
[2015-02-17 21:48:44,025] sht1x: exit:91 INFO GPIO channel function status:
Data pin [18]: GPIO.IN
Clock pin [23]: GPIO.OUT
[2015-02-17 21:48:44,026] sht1x: exit:94 ERROR Exception in with block: <class 'pi_sht1x.sht1x.SHT1xError'>
SHT1x failed to properly receive command [['Temperature'] - 00000011]
<traceback object at 0x1f52df0>
[2015-02-17 21:48:59,368] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 21:48:59,369] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 21:48:59,370] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 21:48:59,371] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 21:48:59,372] sht1x: init:83 INFO Initial configuration:
Data Pin: 18
Clock Pin: 23
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 21:48:59,373] sht1x: _get_ack:393 INFO Command ['Temperature'] [00000011] acknowledged: 3
[2015-02-17 21:48:59,374] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['Temperature'] - 00000011]
[2015-02-17 21:48:59,374] sht1x: exit:91 INFO GPIO channel function status:
Data pin [18]: GPIO.IN
Clock pin [23]: GPIO.OUT
[2015-02-17 21:48:59,375] sht1x: exit:94 ERROR Exception in with block: <class 'pi_sht1x.sht1x.SHT1xError'>
SHT1x failed to properly receive command [['Temperature'] - 00000011]
<traceback object at 0x1155df0>
[2015-02-17 21:54:01,280] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 21:54:01,281] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 21:54:01,282] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 21:54:01,283] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 21:54:01,284] sht1x: init:83 INFO Initial configuration:
Data Pin: 18
Clock Pin: 23
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 21:54:01,285] sht1x: _get_ack:393 INFO Command ['Temperature'] [00000011] acknowledged: 3
[2015-02-17 21:54:01,286] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['Temperature'] - 00000011]
[2015-02-17 21:54:01,286] sht1x: exit:91 INFO GPIO channel function status:
Data pin [18]: GPIO.IN
Clock pin [23]: GPIO.OUT
[2015-02-17 21:54:01,287] sht1x: exit:94 ERROR Exception in with block: <class 'pi_sht1x.sht1x.SHT1xError'>
SHT1x failed to properly receive command [['Temperature'] - 00000011]
<traceback object at 0x22f4df0>
[2015-02-17 21:56:19,672] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 21:56:19,674] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 21:56:19,674] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 21:56:19,675] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 21:56:19,676] sht1x: init:83 INFO Initial configuration:
Data Pin: 18
Clock Pin: 23
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 21:56:19,677] sht1x: _get_ack:393 INFO Command ['Temperature'] [00000011] acknowledged: 3
[2015-02-17 21:56:19,678] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['Temperature'] - 00000011]
[2015-02-17 21:56:19,678] sht1x: exit:91 INFO GPIO channel function status:
Data pin [18]: GPIO.IN
Clock pin [23]: GPIO.OUT
[2015-02-17 21:56:19,679] sht1x: exit:94 ERROR Exception in with block: <class 'pi_sht1x.sht1x.SHT1xError'>
SHT1x failed to properly receive command [['Temperature'] - 00000011]
<traceback object at 0x13dfdf0>
[2015-02-17 22:06:27,621] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 22:06:27,623] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 22:06:27,624] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 22:06:27,624] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 22:06:27,625] sht1x: init:83 INFO Initial configuration:
Data Pin: 18
Clock Pin: 23
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 22:06:27,626] sht1x: _get_ack:393 INFO Command ['Temperature'] [00000011] acknowledged: 3
[2015-02-17 22:06:27,627] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['Temperature'] - 00000011]
[2015-02-17 22:06:27,628] sht1x: exit:91 INFO GPIO channel function status:
Data pin [18]: GPIO.IN
Clock pin [23]: GPIO.OUT
[2015-02-17 22:06:27,628] sht1x: exit:94 ERROR Exception in with block: <class 'pi_sht1x.sht1x.SHT1xError'>
SHT1x failed to properly receive command [['Temperature'] - 00000011]
<traceback object at 0x1a0cdf0>
[2015-02-17 22:07:11,548] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 22:07:11,549] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 22:07:11,550] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 22:07:11,551] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 22:07:11,552] sht1x: init:83 INFO Initial configuration:
Data Pin: 18
Clock Pin: 23
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 22:07:11,553] sht1x: _get_ack:393 INFO Command ['Temperature'] [00000011] acknowledged: 3
[2015-02-17 22:07:11,553] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['Temperature'] - 00000011]
[2015-02-17 22:07:11,554] sht1x: exit:91 INFO GPIO channel function status:
Data pin [18]: GPIO.IN
Clock pin [23]: GPIO.OUT
[2015-02-17 22:07:11,555] sht1x: exit:94 ERROR Exception in with block: <class 'pi_sht1x.sht1x.SHT1xError'>
SHT1x failed to properly receive command [['Temperature'] - 00000011]
<traceback object at 0x70ddf0>
[2015-02-17 22:29:12,918] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 22:29:12,921] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 22:29:12,922] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 22:29:12,923] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 22:29:12,923] sht1x: init:83 INFO Initial configuration:
Data Pin: 11
Clock Pin: 7
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 22:29:12,924] sht1x: _get_ack:393 INFO Command ['Temperature'] [00000011] acknowledged: 3
[2015-02-17 22:29:12,925] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['Temperature'] - 00000011]
[2015-02-17 22:29:12,926] sht1x: exit:91 INFO GPIO channel function status:
Data pin [11]: GPIO.IN
Clock pin [7]: GPIO.OUT
[2015-02-17 22:29:12,926] sht1x: exit:94 ERROR Exception in with block: <class 'pi_sht1x.sht1x.SHT1xError'>
SHT1x failed to properly receive command [['Temperature'] - 00000011]
<traceback object at 0x1096e68>
[2015-02-17 22:29:37,601] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 22:29:37,602] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 22:29:37,603] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['WriteStatusRegister'] - 00000110]
[2015-02-17 22:34:05,989] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 22:34:05,992] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 22:34:05,993] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['WriteStatusRegister'] - 00000110]
[2015-02-17 22:43:06,453] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 22:43:06,455] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 22:43:06,455] sht1x:_write_status_register:455 INFO Writing Status Register: 00000000
[2015-02-17 22:43:06,456] sht1x: _get_ack:393 INFO Command WriteStatusRegister [00000110] acknowledged: 6
[2015-02-17 22:43:06,457] sht1x: init:83 INFO Initial configuration:
Data Pin: 18
Clock Pin: 23
GPIO mode: GPIO.BCM
Vdd: 3.5
Resolution: High
Heater: False
OTP no reload: False
CRC check: True
[2015-02-17 22:43:06,458] sht1x: _get_ack:393 INFO Command ['Temperature'] [00000011] acknowledged: 3
[2015-02-17 22:43:06,459] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['Temperature'] - 00000011]
[2015-02-17 22:43:06,460] sht1x: exit:91 INFO GPIO channel function status:
Data pin [18]: GPIO.IN
Clock pin [23]: GPIO.OUT
[2015-02-17 22:43:06,460] sht1x: exit:94 ERROR Exception in with block: <class 'pi_sht1x.sht1x.SHT1xError'>
SHT1x failed to properly receive command [['Temperature'] - 00000011]
<traceback object at 0x103cdf0>
[2015-02-17 22:45:19,665] sht1x:initialize_sensor:156 INFO Initializing sensor using bit mask: 00000000
[2015-02-17 22:45:19,666] sht1x: _get_ack:393 INFO Command ['WriteStatusRegister'] [00000110] acknowledged: 6
[2015-02-17 22:45:19,667] sht1x: _get_ack:396 ERROR SHT1x failed to properly receive command [['WriteStatusRegister'] - 00000110]
from pi-sht1x.
drohm
commented on July 22, 2024
I took a brief look at the data sheet and the sensors are very similar. I'm going to dig into this over the weekend and see what adjustments are necessary to add SHT7x support. I'll give you an update afterwards.
from pi-sht1x.
drohm
commented on July 22, 2024
I just got my SHT-75. I should be able to look into this some time this weekend.
from pi-sht1x.
drohm
commented on July 22, 2024
Closing this. If I get time to look into the SHT7x series I'll reopen this ticket.
from pi-sht1x.
Related Issues (14)
- Investigate SHT7x Support HOT 3
- SHT1x failed to properly receive command HOT 13
- Stopping re-setting of GPIO's HOT 2
- install Error HOT 9
- sensor.py TypeError HOT 8
- default logging HOT 4
- SHT11 Sensor values exceeds 100% max limit HOT 1
- SHT1x failed to properly receive command HOT 7
- Is it working for Raspberry Pi 3? HOT 9
- Using pi-sht1x library simultaneously with another snesor which uses serial protocol
- Import problem HOT 1
- SHT1X failed to properly receive command [['WriteStatusRegister'] - 00000110] HOT 3
- Wrong formula used to calculate dew point HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from pi-sht1x.