[Task] Optimization suggestions

[gmij]

[Task] Optimization suggestions

[Calvin979]

I'd like to help

[hertzbeat]

Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑‍🤝‍🧑👫🧑🏿‍🤝‍🧑🏻👩🏾‍🤝‍👨🏿👬🏿

---

Description

Some problems encountered by novices during use and their own suggestions. please check. Thanks @tom for your support.

Task List

• The location of system settings, adding storage layer configuration. Don’t let users change configuration files
• Operating system monitoring template, adjust the display of traffic to display in Mb, do not display in Bytes
• Nginx configuration, it should be allowed to add when only stub_status is enabled. Currently, a 502 error is reported.

[tomsun28]

👍

[tomsun28]

I'd like to help

👍👍 welcome, we can consider this two points first.

• 操作系统监控模板，把流量的显示，调整成按Mb显示，不要用Bytes显示
• Nginx的配置，只开启stub_status时应允许添加，当前报502错误。

[Calvin979]

• 操作系统监控模板中，网卡信息默认按MB显式
  #1521

[hertzbeat]

Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑‍🤝‍🧑👫🧑🏿‍🤝‍🧑🏻👩🏾‍🤝‍👨🏿👬🏿

---

• In the operating system monitoring template, the network card information is displayed in MB by default.
  #1521

[Calvin979]

@gmij hello，关于问题3。我这边没有复现出来，你可以试一下以下两种方式：
1、检查下Nginx的路由配置是否正确
2、删除Nginx的yml模板中关于req_status的监控配置

[hertzbeat]

Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑‍🤝‍🧑👫🧑🏿‍🤝‍🧑🏻👩🏾‍🤝‍👨🏿👬🏿

---

@gmij hello, regarding question 3. I haven't reproduced it here. You can try the following two methods:

1. Check whether the routing configuration of Nginx is correct.
2. Delete the monitoring configuration about req_status in the Nginx yml template.
   

[gmij]

@Calvin979

1. 确认nginx的路由配置是正确的。
2. 如果req_status 默认可以不启用的话，是否可以在模板中， 注释掉，需要的人自行启用。这样用户体验上，会不会更好？

[hertzbeat]

Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑‍🤝‍🧑👫🧑🏿‍🤝‍🧑🏻👩🏾‍🤝‍👨🏿👬🏿

---

@Calvin979

1. Confirm that the routing configuration of nginx is correct.
2. If req_status can be disabled by default, can it be commented out in the template and enabled by those who need it? Will this provide a better user experience?

[Calvin979]

@tomsun28 是否需要注释Nginx监控模板中req status的相关监控配置

[tomsun28]

hi，不启用 req_status 模块的情况下也是可以添加nginx监控的，建议如果用户不需要req_status的相关指标，可以自己去监控模版注释掉对应配置，我们默认还是保留吧。

[hertzbeat]

Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑‍🤝‍🧑👫🧑🏿‍🤝‍🧑🏻👩🏾‍🤝‍👨🏿👬🏿

---

Hi, nginx monitoring can be added without enabling the req_status module. It is recommended that if the user does not need the relevant indicators of req_status, he can comment out the corresponding configuration in the monitoring template. We will keep it by default.