Serial console currenly does not work with U-Boot (RPi3)

[drtyhlpr]

Serial console currenly does not work with U-Boot (RPi3)

[drtyhlpr]

I am still working with this RPi3 serial console stuff. Its a (little bit) messy.... argh

there is even a presentation about the serial changes available lol:
http://de.slideshare.net/yeokm1/raspberry-pi-3-uartbluetooth-issues

[burnbabyburn]

I think you got it right. You enabled fastest serial mode (page 13) while bluetooth still works with the following packages:

https://aur.archlinux.org/packages/pi-bluetooth/
or
https://github.com/RPi-Distro/pi-bluetooth/tree/master/debian
to get rid of compat issues use udev for serial1 https://github.com/RPi-Distro/raspberrypi-sys-mods/blob/master/etc.armhf/udev/rules.d/99-com.rules

[burnbabyburn]

Info Links:

• https://spellfoundry.com/2016/05/29/configuring-gpio-serial-port-raspbian-jessie-including-pi-3/
• https://hallard.me/enable-serial-port-on-raspberry-pi/

Pull is comming because it is related with #165

[burnbabyburn]

still broken under u-boot. Only ttyAMA0 and serial1 are created :/

[burnbabyburn]

PhilE explained it here: https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=213499