Add DMR Decoder

[dsheirer]

Add DMR Decoder

[DrekiDegga]

I have had my eye on this feature request for some time now and I would just like to say that I would love to be able to use sdrtrunk to decode DMR/mototrbo/capacityplus. Currently there is no good way to do this with available software So if DMR was added to sdrtrunk it would be the only decent option for trunking DMR.

Thanks for the work you do for sdrtrunk.

[maozhenyu123]

@DSheirer I've been trying to add DMR functionality to sdrtrunk these days, and if possible, I will do TETRA after that.

Basically, I copied part of codes from the P25 phase I because P25 and DMR are similar on modulation level? But with no luck, the DiBits I got did not match with the DMR SYNC.

Since DMR is 4FSK(+/-648HZ, +/-1944HZ) modulated, and P25 is C4FM(+/-600HZ and +/-1800HZ). Does that mean the current DQPSK Demodulator is not going to work with DMR?(If the phase change of 4FSK is not 45°)?

Just wanna get a place to start.

[DSheirer]

@maozhenyu123 Here's the phase inversion symbols. I included code and explanations so that you can see how the derived phase inverted sync symbols are calculated.

cheers,
Denny
Phase Inversion Sync Symbols.txt

[maozhenyu123]

BTW, this program does not decode the signal from my mobile station. The demodulation does not correctly worked as I expected. I think I will need to ask someone for help.

[ah1102]

So I found another DMR decoder project - https://github.com/IanWraith/DMRDecode. This is the same DSD rewritten from "C" to "Java".
DMR decoder program itself, the audio device does not switch, so I can’t even check it. Then, it is not clear where the program outputs the sound.

You can use an example of this code. As far as I know, this code has no copyright.

[GoogleCodeExporter]

Original comment by [email protected] on 6 May 2014 at 11:33

• Added labels: Priority-Low
• Removed labels: Priority-Medium

[spartancain]

Due to the exceptional breakdown you provide in SDRTrunk of the data stream itself and the specific messages received, SDRTrunk has a very useful professional application as a makeshift test set for digital functionality (as used by a tech stuck without a digital service monitor).

That usage would be greatly enhanced by the ability to view the data stream from a TRBO radio. For that reason, I respectfully request that this enhancement be completed as soon as reasonable possible as you continue to develop this outstanding software.

Thank you for all your hard work. I have only recently begun using SDRTrunk, and I am absolutely bowled over by the quantity of features and the clear dedication, persistence, and skill you have put into developing it. My life as a radio technician with hi-tech hardware to fix and low-tech test hardware to use has been measurably improved by this application. I hope you understand that I ask out of professional eagerness rather than impatience - thanks again.

[DSheirer]

I'm glad it's proving useful for you. Once I get build 0.2.0 finalized, I'll be starting on the DMR decoder next.

[truedaystar]

I have one local dept that user DRM that I would love to decode.. So Add the vote in for me.. I love the software,, I have a little to learn, like calibrating my tuners, but I will get there when I get time to set down and do it.

[DSheirer]

Since the deviation of the signal is a little bit wider than P25 C4FM, expand the baseband filter cutoff frequency to ensure the signal isn't being distored.

You may have to change the symbol gain value being passed to the InterpolatingSampleBuffer. Phase 1 decoder uses a value of 0.3 and Phase 2 uses a value of .01

I normally add support for new decoders to the DemodulatorViewerFX application first so that I can visually monitor the performance of the decoder against a real-world signal and I adjust the filter and gain values until I'm happy with the symbol lock-on and tracking performance. The viewer application allows you to manually step through a recording. Warning: the viewer's coding has a lot of warts and is just a dev utility that I use.

[maozhenyu123]

Since the deviation of the signal is a little bit wider than P25 C4FM, expand the baseband filter cutoff frequency to ensure the signal isn't being distored.

You may have to change the symbol gain value being passed to the InterpolatingSampleBuffer. Phase 1 decoder uses a value of 0.3 and Phase 2 uses a value of .01

I normally add support for new decoders to the DemodulatorViewerFX application first so that I can visually monitor the performance of the decoder against a real-world signal and I adjust the filter and gain values until I'm happy with the symbol lock-on and tracking performance. The viewer application allows you to manually step through a recording. Warning: the viewer's coding has a lot of warts and is just a dev utility that I use.

Awesome, it works!! I set the baseband filter cutoff to be 6100 instead of 5100, now DMR SYNC can be detected. BTW, is the phase change still gonna be 45 degrees(since modulation index is now 0.27 rather than 0.25)

[DSheirer]

The phase change detector(s) work by detecting the sync patterns that will be transmitted when the PLL locks at +/- 90 degrees and 180 degrees. You'll have to create these 3 sync patterns as derivatives from the normal sync pattern.

If you look at the dibit/symbol plots for a normal PLL lock, then imagine rotating the entire constellation of dibits/symbols + or - 90 degrees and 180 degrees to formulate what the derivative sync patterns will be.

[maozhenyu123]

I've finished a startup at maozhenyu123@c88fb9d.
Now it can recognize different frame and message.

I think I have to do a little bit adjustment to the filter because sometimes it will miss some sync.

[DSheirer]

@maozhenyu123 Wow! You've made a great bit of progress. If I remember correctly, some of the DMR voice frames (b-f) do not have a sync pattern and that might be causing some of the sync loss.

[maozhenyu123]

@DSheirer Yes, voice frame b-e does not come with a SYNC pattern. But there is still 50%+ chance of missing a VOICE_FRAME_A, which should have a VOICE_SYNC. But it only happened when I am using a mobile radio. I think there might be something wrong with the filter.

[DSheirer]

There's a FilterViewer where you can visualize the parameters that you're using for your filter. Modifiy the getFilter() method and copy your FIRFilterSpecification into that method and it will pop up a graphical display of the filter that's being used.

[maozhenyu123]

@DSheirer Unfortunately, I am not good at doing things like filter and demodulation (not sure what is the ideal situation even I have a visualization of current filter). If possible, could you plz help me with this.

I am still working at higher level and now it supports CSBK/VLC/TLC parsing/validation and voice frame parsing as well. (I have added ReedSolomon_12_9 and BPTC_196_96 to the edac toolkits for block validation)
New commit: maozhenyu123@c6d8012

[DSheirer]

I should have some time this weekend ... I'll see what I can do.

By the way ... there's already a DMR 3/4 rate Trellis decoder in the code base: ViterbiDecoder_3_4_DMR.

[maozhenyu123]

Nice.
I realized sometime the program lost sync(when there was no transmission) and never got back when there was a new one. But once I restart the channel by clicking "STOP" then "START", it will be able to decode then. Also, I can definitely see some repeating pattern(but just not match with DMR sync), with a period of 288bits(the length of a DMR message). Is that because of the phase error(90 CW, CCW, 180)?

[DSheirer]

You're probably right about the PLL locking on with a phase error. Calculating each of the 3 phase error patterns for each sync pattern is going to produce 27 variants to check.

I had an idea to update the MultiSyncPatternMatcher so that it would only check the sync variants when it was in a lost sync state. That would minimize the overhead of checking all patterns all the time.

[maozhenyu123]

I am not sure how to calculate a phase error.

[DSheirer]

No worries. I was going to do it and send but ran out of time. I'll try to work on those this weekend and send to you.

[maozhenyu123]

@DSheirer Unfortunately, none of those sync was detected when there was sync-lost then re-sync. I am trying to figure out why.

[ah1102]

I would like to see a DMR decoder. On github there is a DSD repository with source codes. You can see how it is implemented there.

[maozhenyu123]

I would like to see a DMR decoder. On github there is a DSD repository with source codes. You can see how it is implemented there.

Try my branch on https://github.com/maozhenyu123/sdrtrunk/tree/dmr-function

[ah1102]

Give thanks! But I would like to see DMR in the main branch of the project. Here are all the latest changes.

[ah1102]

Some errors at the end of the package

After a short time, the terminal stops displaying the received packet and "CONTROL" stops displaying yellow.

In the window "Messages" such errors

My settings

Such errors still appear if the "messages" window is active

I have never heard voices. Does your decoder support voice? Can you tell me how to configure?

[maozhenyu123]

Some errors at the end of the package

After a short time, the terminal stops displaying the received packet and "CONTROL" stops displaying yellow.

In the window "Messages" such errors

My settings

I have never heard voices. Does your decoder support voice? Can you tell me how to configure?

It does support voice. But it seems all data are CSBK-IDLE, which means there is no traffic. If a voice frame comes, it will show something like "Voice Frame A"

[ah1102]

Are my settings correct? Do you also get these errors or not? Can I listen to two DMR sites at the same time?

[maozhenyu123]

Are my settings correct? Do you also get these errors or not? Can I listen to two DMR sites at the same time?

My bad, should be fixed now.

[ah1102]

Now I will rebuild

[ah1102]

At first everything was fine, and then the output of packages in the linux terminal stopped, and in the sdrtrunk window this appeared

If I click "Stop" and then "Start", the output resumes and after a few seconds it stops again.

What could be the problem?

[maozhenyu123]

Is there any transmission on the spectrum? I realized when the transmission stopped at first time, the decoder might not work after that if you do not restart it because it's not detecting SYNC anymore. That might be a PLL problem but I don't know how to fix it

[ah1102]

Probably so, for clarity

[ah1102]

I am just learning programming. Tell me, does lsm or c4fm mode matter in your dmr decoder, what should I choose from the list?

[maozhenyu123]

No, DMR use 4FSK.

[ah1102]

Apparently, when a voice appears, such packets go, but I don’t hear anything. I have JMBE 1.0.4 and P25 is decoded.

[maozhenyu123]

This is not a voice frame but a control frame. The actual voice should be located at the channel assigned according to this control frame.

[ah1102]

I don’t know, some mistakes are coming. What could it be? I tried to change the frequency +/-, but it did not bring any result.

[maozhenyu123]

Hmm, interesting. This is a voice frame but seems not valid(may be encrypted?). This release does not come with encryption detection.

Maybe not? I will check it out this afternoon.

[ah1102]

I checked with dsd and there the voice is not encrypted.

[ah1102]

And you have implemented the function: - non / inverted DMR / MOTOTRBO signal ?

Can you check how and compare how it is implemented in dsd https://github.com/szechyjs/dsd? There is a wiki where you can read

He can talk with the author of this project https://github.com/moneriomaa/openear He is actively responding.

[ah1102]

It seems that the DMR, in which firefighters work in our city, does not demodulate your decoder. But he demodulates the ham radio in DMR. But in both cases, I see errors in java files in the terminal. It must be modified. Because DSD demodulates everyone in the DMR.

[cmartus]

I've done some testing with the dmr-function-denny-edits2 branch and get errors along the line of encrypted voice. Using an AnyTone D868UV, Simplex TS1 TG99.

ERROR i.g.d.d.f.c.o.ChannelOutputProcessor - Error while processing polyphase channel samples [155MB/321MB 48%] java.lang.NullPointerException: null at io.github.dsheirer.edac.ReedSolomon_12_9.checkReedSolomon(ReedSolomon_12_9.java:320) at io.github.dsheirer.module.decode.dmr.message.data.lc.LCMessageFactory.createFull(LCMessageFactory.java:49) at io.github.dsheirer.module.decode.dmr.message.data.DataMessageWithLinkControl.getLCMessage(DataMessageWithLinkControl.java:61) at io.github.dsheirer.module.decode.dmr.message.data.DataMessageWithLinkControl.getIdentifiers(DataMessageWithLinkControl.java:79) at io.github.dsheirer.alias.action.AliasActionManager.receive(AliasActionManager.java:58) at io.github.dsheirer.alias.action.AliasActionManager.receive(AliasActionManager.java:43) at io.github.dsheirer.sample.Broadcaster.broadcast(Broadcaster.java:152) at io.github.dsheirer.sample.Broadcaster.receive(Broadcaster.java:59) at io.github.dsheirer.module.decode.Decoder$MessageDistributor.receive(Decoder.java:103) at io.github.dsheirer.module.decode.Decoder$MessageDistributor.receive(Decoder.java:96) at io.github.dsheirer.module.decode.dmr.DMRMessageProcessor.dispatch(DMRMessageProcessor.java:104) at io.github.dsheirer.module.decode.dmr.DMRMessageProcessor.receive(DMRMessageProcessor.java:61) at io.github.dsheirer.module.decode.dmr.DMRMessageProcessor.receive(DMRMessageProcessor.java:39) at io.github.dsheirer.module.decode.dmr.DMRMessageFramer.processDataBurst(DMRMessageFramer.java:316) at io.github.dsheirer.module.decode.dmr.DMRMessageFramer.burstDetectedWithSync(DMRMessageFramer.java:334) at io.github.dsheirer.module.decode.dmr.DMRBurstDetector.parseBurst(DMRBurstDetector.java:123) at io.github.dsheirer.module.decode.dmr.DMRBurstDetector.syncDetected(DMRBurstDetector.java:71) at io.github.dsheirer.bits.DMRSoftSyncDetector.checkSync(DMRSoftSyncDetector.java:59) at io.github.dsheirer.bits.MultiSyncPatternMatcher.receive(MultiSyncPatternMatcher.java:96) at io.github.dsheirer.module.decode.dmr.DMRSyncDetector.receive(DMRSyncDetector.java:128) at io.github.dsheirer.module.decode.dmr.DMRBurstDetector.receive(DMRBurstDetector.java:98) at io.github.dsheirer.module.decode.dmr.DMRMessageFramer.receive(DMRMessageFramer.java:180) at io.github.dsheirer.module.decode.dmr.DMRMessageFramer.receive(DMRMessageFramer.java:54) at io.github.dsheirer.sample.Broadcaster.broadcast(Broadcaster.java:152) at io.github.dsheirer.sample.Broadcaster.receive(Broadcaster.java:59) at io.github.dsheirer.dsp.psk.PSKDemodulator.broadcast(PSKDemodulator.java:58) at io.github.dsheirer.dsp.psk.DQPSKDecisionDirectedDemodulator.calculateSymbol(DQPSKDecisionDirectedDemodulator.java:88) at io.github.dsheirer.dsp.psk.PSKDemodulator.receive(PSKDemodulator.java:115) at io.github.dsheirer.dsp.psk.PSKDemodulator.receive(PSKDemodulator.java:89) at io.github.dsheirer.module.decode.dmr.DMRStandardDecoder.receive(DMRStandardDecoder.java:109) at io.github.dsheirer.module.decode.dmr.DMRStandardDecoder.receive(DMRStandardDecoder.java:43) at io.github.dsheirer.sample.buffer.ReusableBufferBroadcaster.broadcast(ReusableBufferBroadcaster.java:42) at io.github.dsheirer.sample.buffer.ReusableBufferBroadcaster.broadcast(ReusableBufferBroadcaster.java:23) at io.github.dsheirer.sample.Broadcaster.receive(Broadcaster.java:59) at io.github.dsheirer.sample.buffer.ReusableComplexBufferAssembler.flush(ReusableComplexBufferAssembler.java:158) at io.github.dsheirer.sample.buffer.ReusableComplexBufferAssembler.receive(ReusableComplexBufferAssembler.java:132) at io.github.dsheirer.sample.buffer.ReusableComplexBufferAssembler.receive(ReusableComplexBufferAssembler.java:144) at io.github.dsheirer.dsp.filter.channelizer.output.OneChannelOutputProcessor.process(OneChannelOutputProcessor.java:97) at io.github.dsheirer.dsp.filter.channelizer.output.ChannelOutputProcessor.processChannelResults(ChannelOutputProcessor.java:124) at io.github.dsheirer.dsp.filter.channelizer.PolyphaseChannelSource.processSamples(PolyphaseChannelSource.java:248) at io.github.dsheirer.source.tuner.channel.TunerChannelSource$ScheduledIntervalProcessor.run(TunerChannelSource.java:321) at java.base/java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:515) at java.base/java.util.concurrent.FutureTask.runAndReset(FutureTask.java:305) at java.base/java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:305) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) at java.base/java.lang.Thread.run(Thread.java:830)