Akka-pi-OS-install-instructions.md dont seem to work

[nolangrace]

Akka-pi-OS-install-instructions.md dont seem to work

[eloots]

@nolangrace Seems you connected an external screen via the RPi HDMI connector. Note that, after you flash the card and boot from it the first time, the Pi goes through a number of steps such as resizing the file system and installing a number of packages (such as tmux). For the latter, it needs access to the Internet. Make sure that your Pi is connected to [most probably your home network] and note that the initial configuration can take a couple of minutes, so be patient. The easiest way to do this is by using a properly configured travel router that connects to your home network via Wifi. See instructions near the bottom of the main README file.

[eloots]

@nolangrace Closing as no feedback was received on last post. I assume the issue has been solved in the mean time.