Initial command to send data over TCP/IP

[10k10]

Initial command to send data over TCP/IP

[ericstoneking]

Hi,

The Tx/Rx example might be useful for debugging this. See "Docs/TxRx Example.txt". The Tx end is the server, so you start it first. Watch the messages it writes to the terminal. Something like:

Server is listening on port 10001

Then when you run 42 Rx, you'll see this on the Rx end:
Client connecting to Server on Port 10001
Client side of socket established.

and on the Tx end:
Server side of socket established.

And then a flood of socket traffic.

So, is your socket getting established in the first place?

If you get one message from your server, then it stalls, then it's probably waiting for an acknowledgment message from your client.

That's all I can guess based on available information.

Regards,
-Eric

[10k10]

Thanks for your reply.

The socket is not getting estabilished... probably something wrong with my TCP Client. I asked about some command, or handshake thinking that could be the missing part to get estabilished the connection.

I'll investigate it, thanks for your help.

Best regards,
Robinson.