Ei_O_T
Breadboard Friendly ESP32-S2 Development Kit / Breakout
All EI.O.T Boards are manufactured in either Europe or USA. There are NO genuine Boards made in Asia, and there probably never will be. This is necessary to ensure quality and safety for the applications developed with our Development Kits and breakout boards. USB-OTG functionality is built in Hardwarwe wise. Software support is currently under development.
The Board can be assembled in two ways allowing dominantly left and right handed Developers to optimally use it, also by flipping it upside down you can choose to have the USB cable stick out the top or bottom.
Safety and Handling Notice: This product is exclusivelly intended as an utility device for development under laboratory conditions. For use or operation specialist knowledge is required. Assembly by yourself as askilled technician is required. The provided Firmware is only example code to confirm a correctly executed flashing process.
The project is Licensed CC-BY-SA, the Provided Gerbers are marked with registered Trademarks owned by the original developer or IP owners. Violation of these rights is not covered by the Open source license or any other license. If you want to manufacture the Boards for your own private use, you can freely do so. If you intent to bring this design into circulation of any kind you can apply for a distribution license and will be provided an individual version.
The Circuitpython firmware is provided under CC_BY_SA license adhering to the original file it was based on. You need to follow this guide to be able to flash it: https://circuitpython.readthedocs.io/en/6.1.x/ports/esp32s2/README.html
For usage with the Arduino IDE please follow the latest tutorial to install the ESP32S2 based boards on Arduino IDE. To programm the board please choose "ESP32S2DevModule" from the boards list. Put the board into download mode by holding down the Flash button while pressing reset. EI.O.T does not automatically reset by design, you need to push the reset button yourself, this is to avoid serial transmittion errors while developing IOT applications.
This evaluation board/kit is intended for use for engineering development, evaluation or demonstration use only. It is not considered by MAYER MAKES e.U. to be a product for End-user /consumer use. This evaluation board/kit does not fall within the scope of the European Union directives regarding electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL. Therefore it may not meet those requirements and is only suitable for use by technically skilled professionals.****