Autoreboot?

[eworm-de]

Autoreboot?

[eworm-de]

You are speaking about what? firmware-upgrade-reboot?
In fact it does not matter if auto-upgrade is enabled. Just run the script it will upgrade and reboot as required.

[dima1002]

Yes exactly from the script.
After a packages update, a firmware update must be made and then a 2nd reboot. Is not that so?

[eworm-de]

The firmware update is not strictly required (unless mentioned in changelog), but I do update and keep the versions in sync just to be sure. So what's the output of /system/routerboard/print?

[eworm-de]

Also the script should give some output. What happens if you run it?

[admin@MikroTik] > /system/script/run firmware-upgrade-reboot 
info: Firmware is already up to date.

[dima1002]

I want to keep it in sync too.
The Mikrotik access point should always reboot automatically when the following message appears in the log: "Firmware upgraded successfully, please reboot for changes to take effect!"

Here is my output:
[admin@MikroTik] > /system/routerboard/print
```
;;; Firmware upgraded successfully, please reboot for changes
to take effect!
routerboard: yes
board-name: hAP ac
model: RB962UiGS-5HacT2HnT
revision: r2
serial-number: F7D11F682D27
firmware-type: qca9550L
factory-firmware: 6.44.6
current-firmware: 7.1.3
upgrade-firmware: 7.4.1

[dima1002]

Unfortunately nothing happens. The output hangs

[eworm-de]

The documentation starts with:

ℹ️ Info: This script can not be used on its own but requires the base installation. See main README for details.

You should do that.