Comments (11)
It should be possible. For intermediate solution : you can try to use an external software producing a PSK32 wav and then generate an IQ file using pissb. It is not direct and not optimized.
I think to implement majors digital modes : PSK31, JT65, WPSR soon !
from rpitx.
I know this is just a private, open source project so I cannot really expect anything and should just happily use what you already made and published... but perhaps you have a time line set or at least you can give me a rough estimate on new modes implementation? I am interested mostly in WSPR, as I have now Raspberry Pi 3 and Zero, and James' WSPR tool for Raspberry Pi (https://github.com/JamesP6000/WsprryPi) does not work with the newer RPis and his project looks inactive. Other modes such as already mentioned JT65 and PSK31 would be also great.
from rpitx.
Look for my other ticket (wssprpi and rpitx conflict or something similar)
You've to recompile wssprpi after a little change on the source code,
otherwise wssprpi won't work anymore after installing rpitx
Il 27 set 2016 12:54, "streamofstars" [email protected] ha scritto:
@ha7dcd https://github.com/ha7dcd I was trying yesterday and it did not
work - compiled properly, run without errors but my SDR plugged in to
another computer 2 meters away did not receive any signal. Rpitx on the
other hand, worked flawlessly. So I am not sure what is the issue here.
Will remove current installation and try again from scratch later on, if
you know for sure WsprryPi works with RPi 3. I have also emailed James
about my issues yesterday. Anyway, when it comes to rpitx, it would be
great to have all the modes available in one tool, so whether James'
implementation works or not, I would still vote for Evariste's rpitx have
them implemented.
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
#42 (comment), or mute
the thread
https://github.com/notifications/unsubscribe-auth/ABrFITdIXxT_ziRMTeAnxncgPfPqb1S-ks5quPXggaJpZM4KGRqh
.
from rpitx.
Hi,
Something you mistaken here, https://github.com/JamesP6000/WsprryPi is
running nice on RPi 3!
You possibly want to make an install using a fresh image.
73,
HA7DCD
Zoltan
On Tue, Sep 27, 2016 at 10:44 AM, streamofstars [email protected]
wrote:
I know this is just a private, open source project so I cannot really
expect anything and should just happily use what you already made and
published... but perhaps you have a time line set or at least you can give
me a rough estimate on new modes implementation? I am interested mostly in
WSPR, as I have now Raspberry Pi 3 and Zero, and James' WSPR tool for
Raspberry Pi (https://github.com/JamesP6000/WsprryPi) does not work with
the newer RPis and his project looks inactive. Other modes such as already
mentioned JT65 and PSK31 would be also great.—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
#42 (comment), or mute
the thread
https://github.com/notifications/unsubscribe-auth/AO-vHlDc2tSlEPrQwxgc6MXAYw9Kg30Xks5quNdjgaJpZM4KGRqh
.
from rpitx.
@ha7dcd I was trying yesterday and it did not work - compiled properly, run without errors but my SDR plugged in to another computer 2 meters away did not receive any signal. Rpitx on the other hand, worked flawlessly. So I am not sure what is the issue here. Will remove current installation and try again from scratch later on, if you know for sure WsprryPi works with RPi 3. I have also emailed James about my issues yesterday. Anyway, when it comes to rpitx, it would be great to have all the modes available in one tool, so whether James' implementation works or not, I would still vote for (@F5OEO) Evariste's rpitx have them implemented.
from rpitx.
You may tryied to wrong GPIO, Wsprry pi works on GPIO4, not the same as
rpitx: http://j.mp/tapr-qrpi
On Tue, Sep 27, 2016 at 12:54 PM, streamofstars [email protected]
wrote:
@ha7dcd https://github.com/ha7dcd I was trying yesterday and it did not
work - compiled properly, run without errors but my SDR plugged in to
another computer 2 meters away did not receive any signal. Rpitx on the
other hand, worked flawlessly. So I am not sure what is the issue here.
Will remove current installation and try again from scratch later on, if
you know for sure WsprryPi works with RPi 3. I have also emailed James
about my issues yesterday. Anyway, when it comes to rpitx, it would be
great to have all the modes available in one tool, so whether James'
implementation works or not, I would still vote for Evariste's rpitx have
them implemented.—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
#42 (comment), or mute
the thread
https://github.com/notifications/unsubscribe-auth/AO-vHqhm522xRet1D1O7n4GNu-kkRH4xks5quPXigaJpZM4KGRqh
.
from rpitx.
today tested for you, works nice on my RPi 3: http://imgur.com/C0y7Ufo
On Thu, Sep 29, 2016 at 3:06 PM, Zoltan Doczi [email protected] wrote:
You may tryied to wrong GPIO, Wsprry pi works on GPIO4, not the same as
rpitx: http://j.mp/tapr-qrpiOn Tue, Sep 27, 2016 at 12:54 PM, streamofstars [email protected]
wrote:@ha7dcd https://github.com/ha7dcd I was trying yesterday and it did
not work - compiled properly, run without errors but my SDR plugged in to
another computer 2 meters away did not receive any signal. Rpitx on the
other hand, worked flawlessly. So I am not sure what is the issue here.
Will remove current installation and try again from scratch later on, if
you know for sure WsprryPi works with RPi 3. I have also emailed James
about my issues yesterday. Anyway, when it comes to rpitx, it would be
great to have all the modes available in one tool, so whether James'
implementation works or not, I would still vote for Evariste's rpitx have
them implemented.—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
#42 (comment), or mute
the thread
https://github.com/notifications/unsubscribe-auth/AO-vHqhm522xRet1D1O7n4GNu-kkRH4xks5quPXigaJpZM4KGRqh
.
from rpitx.
@ha7dcd Thanks for testing that for me and confirming it should work with RPi3.
@michelinok OMG THANKS SO MUCH! That was it! The problem described here #38 WsprryPi does not transmit when installed along rpitx unless one of the below is implemented (quote):
1- Remove dt-blob.bin in /boot/ and reboot, put dt-blob.bin when use rpitx
2 - recompile wsprpi by changing https://github.com/JamesP6000/WsprryPi/blob/master/wspr.cpp#L58 with #define F_PLLD_CLK (1000000000.0*(1-2.500e-6))
from rpitx.
I used the second option (modify and recompile)
Glad it helped
Il 29 set 2016 23:47, "streamofstars" [email protected] ha scritto:
@michelinok https://github.com/michelinok OMG THANKS SO MUCH! That was
it! The problem described here #38
#38 WsprryPi does not transmit
when installed along rpitx unless one of the below is implemented (quote):1- Remove dt-blob.bin in /boot/ and reboot, put dt-blob.bin when use rpitx
2 - recompile wsprpi by changing https://github.com/JamesP6000/
WsprryPi/blob/master/wspr.cpp#L58 with #define F_PLLD_CLK
(1000000000.0*(1-2.500e-6))—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
#42 (comment), or mute
the thread
https://github.com/notifications/unsubscribe-auth/ABrFIWZ1a65_xibIg39fLazERi5ya7Hqks5qvDHWgaJpZM4KGRqh
.
from rpitx.
One more digital mode for rpitx is available. I have created an extension to rpitx for RTTY.
For the time being it can be downloaded from yeovil-arc.com/rpi_rtty.zip
I would much appreciate someone trying it.
from rpitx.
@G3ZLQ it seems to work. I tried on 2m. Be advised, your readme_rtty.md file says
./testrtty will send from raspberry pi as described in readme.md
but even after compiling, there is no readme.md file to be found. I see that the message to be encoded is provided in plain text within the testrtty.sh. I have customized, transmitted, received properly but at the end of the transmission I always find a few characters that were not encoded by me. I am not sure if this is just a glitch, my fault, your fault or perhaps you purposely add something at the end.
from rpitx.
Related Issues (20)
- Installation fatal error: librpitx/librpitx.h HOT 1
- Pager message sent 4 times on some frequencies HOT 3
- O/S Question HOT 1
- Wont install on latest Debian Bookworm HOT 1
- Pi4 POCSAG transmission failure
- More dead projects? HOT 2
- Transmission not working on Raspberry Pi 3B+ HOT 7
- On/off codes? (Feature or doc request)
- Compile fails at ./install.sh: missing semicolons at code HOT 1
- librpitx
- Raspbery Pi Bookworm lbcm_host and semicolons missing HOT 2
- Will you continue work on this project HOT 1
- dvb/dvbsenco8.s:2: Error: junk at end of line, first unrecognized character is `@' HOT 7
- POCSAG message sent 4 times and text is an alphanumeric string
- Continuous wave during NFM .wav file tx HOT 4
- Amplitude modulation HOT 4
- Swedish letter Å Ä Ö HOT 4
- Another question about pocsag
- Hi HOT 1
- question about power output HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from rpitx.