onvif probe does not work with brands that use different onvif ports

[jonasbernardo]

onvif probe does not work with brands that use different onvif ports

[faithoflifedev]

Hi @jonasbernardo, from your description, I'm not clear on what the problem you're experiencing is.

For instance, if you run onvif probe and it returns an XAddrs for a device like http://192.168.1.54:85/onvif/device_service meaning the device is available on port 85 and usually the web interfase for that device can be reached in the browser with the url http://192.168.1.54:85.

Now if you want to connect to that device with further onvif cli commands you can first run:

onvif authorize

Where, when asked for host you would give http://192.168.1.54:85 (the host and port), then provide the username and password for the device.

Assuming all of the provided info is correct, you could then run additional cli command like:

onvif device-management get-device-information

Alternatively you can do the same thing with dart code:

final onvif = await Onvif.connect(
 host: 'http://192.168.1.54:85',
 username: [username],
 password: [password]);

var deviceInfo = await onvif.deviceManagement.getDeviceInformation();

print(deviceInfo);

[faithoflifedev]

I'm closing this since there's been no activity.