Comments (19)
Hello,
Strangely, it worked now. Attached is the log file. The folder D:\Destination is existing.
from zpaqfranz.
Hi Mr. Corbelli,
Thanks, this new version is working fine on Windoıws 7. I will continue to test the robocopy option.
from zpaqfranz.
It's a feature! :)
In fact, it synchronizes files, not folders
Fixing in progress...
from zpaqfranz.
Can you please try the attached pre-release?
58_8i.zip
There are two modes
default => always set timestamp and attributes
-pakka => check before set
I am not really sure, -pakka could be faster on slow system (ex. SMB shares)
Now will print something like that
FOLDER-TOUCH WITH -pakka (check-before-touch)
getfolderinf 47
getfolder2 47
setfolder 78
TOUCHED 3.145
TOTAL_TOUCH 172 ***
total_touch is total time
Thank you
PS Here an example of -pakka vs no -pakka of a real-world FreeBSD server robocoping to a Solaris-based NFS NAS.
With "-pakka"...
- get the data
- if data differ, then touch
Without
- touch every folder
On fast media (ex. local SSD) this is faster than -pakka.
Please report you statistics
root@aserver:/tmp/zp # zpaqfranz r /tank/d /monta/nexes_aserver/robocopy/ -kill -pakka
*** ROBOCOPY MODE *** *** ignoring .zfs and :$DATA ***
04/08/2023 21:23:01 Scan dir <</tank/d/>>
04/08/2023 21:23:03 Scan dir <</monta/nexes_aserver/robocopy/>>
|00| 155.00 GB 225.000
Master 83.283.195.774 (77.56 GB files 104.206) <</tank/d/>>
[10 %] 10.421 / 104.206 ( 8.59 GB / 77.56 GB [11 %]) ETA 00:00:21
[20 %] 20.842 / 104.206 ( 14.71 GB / 77.56 GB [18 %]) ETA 00:00:23
[30 %] 31.263 / 104.206 ( 21.71 GB / 77.56 GB [27 %]) ETA 00:00:28
[40 %] 41.683 / 104.206 ( 25.67 GB / 77.56 GB [33 %]) ETA 00:00:20
[50 %] 52.104 / 104.206 ( 39.47 GB / 77.56 GB [50 %]) ETA 00:00:16
[60 %] 62.525 / 104.206 ( 40.86 GB / 77.56 GB [52 %]) ETA 00:00:11
[70 %] 72.945 / 104.206 ( 46.69 GB / 77.56 GB [60 %]) ETA 00:00:08
[80 %] 83.366 / 104.206 ( 51.50 GB / 77.56 GB [66 %]) ETA 00:00:05
[90 %] 93.787 / 104.206 ( 53.68 GB / 77.56 GB [69 %]) ETA 00:00:02
Touching 6.961 / 8.371 @ 2.320 touch/s
= 104.206 83.283.195.774 B
Robocopy time 30.11 - Slaves getinfo 0.00 s
Written bytes 83.182.529.762 (77.47 GB) @ 2.762.346.154 B/sec
74.407 seconds (000:01:14) (all OK)
root@aserver:/tmp/zp # zpaqfranz r /tank/d /monta/nexes_aserver/robocopy/ -kill
zpaqfranz v58.8i-JIT-L,HW SHA1/2,(2023-08-04)
franz:-kill
*** ROBOCOPY MODE *** *** ignoring .zfs and :$DATA ***
04/08/2023 21:24:32 Scan dir <</tank/d/>>
04/08/2023 21:24:34 Scan dir <</monta/nexes_aserver/robocopy/>>
|00| 155.00 GB 225.000
Master 83.283.195.774 (77.56 GB files 104.206) <</tank/d/>>
--------------------------------------------------------------------------------------
[10 %] 10.421 / 104.206 ( 8.59 GB / 77.56 GB [11 %]) ETA 00:00:24
[20 %] 20.842 / 104.206 ( 14.71 GB / 77.56 GB [18 %]) ETA 00:00:27
[30 %] 31.263 / 104.206 ( 21.71 GB / 77.56 GB [27 %]) ETA 00:00:30
[40 %] 41.683 / 104.206 ( 25.67 GB / 77.56 GB [33 %]) ETA 00:00:21
[50 %] 52.104 / 104.206 ( 39.47 GB / 77.56 GB [50 %]) ETA 00:00:17
[60 %] 62.525 / 104.206 ( 40.86 GB / 77.56 GB [52 %]) ETA 00:00:12
[70 %] 72.945 / 104.206 ( 46.69 GB / 77.56 GB [60 %]) ETA 00:00:09
[80 %] 83.366 / 104.206 ( 51.50 GB / 77.56 GB [66 %]) ETA 00:00:06
[90 %] 93.787 / 104.206 ( 53.68 GB / 77.56 GB [69 %]) ETA 00:00:03
Touching 8.335 / 8.371 @ 438 touch/s
= 104.206 83.283.195.774 B
Robocopy time 47.76 - Slaves getinfo 0.00 s
Written bytes 83.182.529.762 (77.47 GB) @ 1.741.641.292 B/sec
93.256 seconds (000:01:33) (all OK)
from zpaqfranz.
Hello,
Thanks for the attachment. I tested this version but zpaqfranz does not copy any file or folder :
zpaqfranz.exe r "C:\source" "D:\Destination" -kill
zpaqfranz v58.8i-JIT-GUI-L,HW BLAKE3,SHA1/2,SFX64 v55.1,(2023-08-04)
franz:-kill
*** ROBOCOPY MODE *** *** ignoring .zfs and :$DATA ***
04/08/2023 23:24:20 Scan dir <<C:/Source/>>
|00| 124.23 MB 1.000
zpaqfranz.exe r "C:\source" "D:\Destination" -kill -pakka
*** ROBOCOPY MODE *** *** ignoring .zfs and :$DATA ***
04/08/2023 23:25:03 Scan dir <<C:/Source/>>
|00| 124.23 MB 1.000
The folder D:\Destination remains empty.
from zpaqfranz.
Weird, please try -ssd -space -kill
Do not use "
(No tested on Windows, but on FreeBSD. Today I'l check on windows too)
from zpaqfranz.
Hello,
No any difference. The folder D:\Destination remains intact and empty :
zpaqfranz.exe r C:\Source D:\Destination -ssd -space -kill
zpaqfranz v58.8i-JIT-GUI-L,HW BLAKE3,SHA1/2,SFX64 v55.1,(2023-08-04)
franz:-kill -space -ssd
*** ROBOCOPY MODE *** *** ignoring .zfs and :$DATA ***
Creating 2 scan threads
from zpaqfranz.
Really, really weird
C:\zpaqfranz>zpaqfranz r c:\Source z:\Destination -kill
zpaqfranz v58.8i-JIT-GUI-L,HW BLAKE3,SHA1/2,SFX64 v55.1,(2023-08-04)
franz:-hw -kill
*** ROBOCOPY MODE *** *** ignoring .zfs and :$DATA ***
04/08/2023 22:49:37 Scan dir <<c:/Source/>>
04/08/2023 22:49:37 Scan dir <<z:/Destination/>>
Master 1.410.404.218 (1.31 GB files 2.251) <<c:/Source/>>
--------------------------------------------------------------------------------------
005% 00:00:00 ( 68.22 MB) of ( 1.31 GB) 71.534.032/sEc
010% 00:00:00 ( 134.79 MB) of ( 1.31 GB) 141.341.247/sEc
015% 00:00:00 ( 202.33 MB) of ( 1.31 GB) 212.155.578/sEc
020% 00:00:00 ( 269.64 MB) of ( 1.31 GB) 282.741.753/sEc
025% 00:00:00 ( 336.96 MB) of ( 1.31 GB) 353.329.504/sEc
030% 00:00:00 ( 404.01 MB) of ( 1.31 GB) 423.635.150/sEc
035% 00:00:00 ( 470.86 MB) of ( 1.31 GB) 493.730.145/sEc
060% 00:00:00 ( 814.62 MB) of ( 1.31 GB) 854.196.686/sEc
065% 00:00:00 ( 874.80 MB) of ( 1.31 GB) 917.290.744/sEc
070% 00:00:00 ( 942.08 MB) of ( 1.31 GB) 987.840.586/sEc
075% 00:00:00 (1009.58 MB) of ( 1.31 GB) 1.058.627.227/sEc
080% 00:00:00 ( 1.05 GB) of ( 1.31 GB) 1.128.403.273/sEc
085% 00:00:00 ( 1.12 GB) of ( 1.31 GB) 1.199.274.684/sEc
090% 00:00:00 ( 1.18 GB) of ( 1.31 GB) 1.269.707.549/sEc
095% 00:00:00 ( 1.25 GB) of ( 1.31 GB) 1.339.956.057/sEc
+ 2.251 1.410.404.218 B in 0.97s 1.455.525.508/sec
xls 1 17.408 B
Robocopy time 1.05 - Slaves getinfo 0.03 s
Written bytes 1.410.404.218 (1.31 GB) @ 1.345.805.551 B/sec
1.079 seconds (000:00:01) (all OK)
Can you please do something like
zpaqfranz r c:\Source z:\Destination -kill -debug -out thelog.txt -silent
then attach the "thelog.txt" ?
from zpaqfranz.
(2) does the d:\ drive exists?
If not you should get something like that
C:\zpaqfranz>zpaqfranz r c:\Source d:\Destination -kill
zpaqfranz v58.8i-JIT-GUI-L,HW BLAKE3,SHA1/2,SFX64 v55.1,(2023-08-04)
franz:-hw -kill
*** ROBOCOPY MODE *** *** ignoring .zfs and :$DATA ***
04/08/2023 22:54:04 Scan dir <<c:/Source/>>
04/08/2023 22:54:04 Scan dir <<d:/Destination/>>
27437: space needed 1.31 GB but only 0.00 B reported free on <<d:/Destination/>>
27441: exit, not enough space/destination does not exists; use -space if you want
0.047 seconds (00:00:00) (with warnings)
Please put all the output
from zpaqfranz.
OK, test and let me know
from zpaqfranz.
https://github.com/fcorbelli/zpaqfranz/releases/tag/58.8
from zpaqfranz.
Hello,
I managed to reproduce the problem.
This first command does not have any effect and no files are copied to the empty D:\Destination folder :
D:\Tools2023\sys\zpaqfranz>zpaqfranz r C:\Source D:\Destination -kill
zpaqfranz v58.8k-JIT-GUI-L,HW BLAKE3,SHA1/2,SFX64 v55.1,(2023-08-05)
franz:-kill
*** ROBOCOPY MODE *** *** ignoring .zfs and :$DATA ***
07/08/2023 21:38:34 Scan dir <<C:/Source/>>
|00| 124.23 MB 1.000
This one is copying successfully all the directory sturcture :
D:\Tools2023\sys\zpaqfranz>zpaqfranz r C:\Source D:\Destination -kill -debug -ou
t thelog.txt -silent
48149: array franz flag size 65
48150: -715 0 <<Runs just about like zpaq 7.15>>
48150: -append 0 <<Append-only (antiransomware, slow)>>
48150: -backupxxh3 0 <<Use XXH3 in backup instead of MD5>>
48150: -big 0 <<Big>>
48150: -checksum 0 <<Do checksums>>
48150: -checktxt 0 <<Checktxt (MD5)>>
48150: -comment 0 <<Comment version>>
48150: -debug 1 <<Activate debug mode>>
48150: -debug -zero 0 <<Add files but zero-filled (debugging)>>
48150: -debug -zero -kill 0 <<Add 0-byte long file (debugging)>>
48150: -desc 0 <<Orderby desc>>
48150: -fasttxt 0 <<Create test .txt with CRC-32 and QUICK>>
48150: -filelist 0 <<Create a filelist .txt>>
48150: -findzpaq 0 <<Search .zpaq in every drive letter (USB devic
e)>>
48150: -fix255 0 <<Fix 255>>
48150: -fixcase 0 <<Fix CAse>>
48150: -fixeml 0 <<Fix eml filenames>>
48150: -fixreserverd 0 <<fixreserverd>>
48150: -flat 0 <<Flat filenames>>
48150: -force 0 <<Force>>
48150: -forcewindows 0 <<Store ADS stuff (default: NO)>
>
48150: -forcezfs 0 <<Enforce using .zfs>>
48150: -frugal 0 <<Frugal backup>>
48150: -hashdeep 0 <<Hashdeep>>
48150: -hw 0 <<Use HW SHA1>>
48150: -image 0 <<Drive image>>
48150: -kill 1 <<Kill>>
48150: -longpath 0 <<Longpath>>
48150: -mm 0 <<Memory mapped>>
48150: -noattributes 0 <<Nessun attributo>>
48150: -nodedup 0 <<Turn off deduplicator>>
48150: -noeta 0 <<Do not show ETA>>
48150: -nopath 0 <<Do not store path>>
48150: -noqnap 0 <<Exclude QNAP snap & trash>>
48150: -norecursion 0 <<Do not recurse into folders (default: YES)>>
48150: -nosort 0 <<Do not sort file>>
48150: -open 0 <<open>>
48150: -pakka 0 <<New output>>
48150: -paranoid 0 <<Paranoid>>
48150: -quiet 0 <<Do not show filesystem errors>>
48150: -ramdisk 0 <<ramdisk>>
48150: -rename 0 <<Rename>>
48150: -sfxall 0 <<Sfx all>>
48150: -sfxforce 0 <<Sfx force>>
48150: -silent 1 <<Silent>>
48150: -space 0 <<Do not check space/writeability>>
48150: -ssd 0 <<SSD>>
48150: -stat 0 <<Statistics>>
48150: -stdin 0 <<stdin>>
48150: -stdout 0 <<stdout>>
48150: -store 0 <<Store mode: no deduplication, no compression>
>
48150: -tar 0 <<TAR mode (store posix)>>
48150: -test 0 <<Only do test>>
48150: -touch 0 <<Force 'touch' on date (7.15 to zpaqfranz)>>
48150: -utc 0 <<Use UTC time>>
48150: -utf 0 <<UTF-8>>
48150: -verbose 0 <<Verbose output>>
48150: -verify 0 <<Verify>>
48150: -vss 0 <<Enable Volume Shadow Copies>>
48150: -xls 0 <<Do NOT force adding of XLS/PPT (default: NO)>
>
48150: -zero 0 <<Flag zero>>
48150: -zfs 0 <<Do NOT ignore .zfs (default: YES)
>>
48150: /od 0 <<Order by date>>
48150: /on 0 <<Order by name>>
48150: /os 0 <<Order by size>>
FULL exename <<D:/Tools2023/sys/zpaqfranz/zpaqfranz.exe>>
1838: new ecx 43705343
1843: new ebx 0
SSSE3 :OK
SSE41 :OK
SHA :NO
Operating system : Windows 7 64-bit Sp1
Attached is the log file.
from zpaqfranz.
from zpaqfranz.
Hello,
Finally, a concrete example to demistify the case :
The command below has no any effect :
D:\Tools2023\sys\zpaqfranz>zpaqfranz r C:\Source D:\Destination -kill
zpaqfranz v58.8k-JIT-GUI-L,HW BLAKE3,SHA1/2,SFX64 v55.1,(2023-08-05)
franz:-kill
*** ROBOCOPY MODE *** *** ignoring .zfs and :$DATA ***
07/08/2023 21:46:22 Scan dir <<C:/Source/>>
|00| 124.23 MB 1.000
Appending the switch -silent to the end of the command line is "enforcing" the transfer of the files :
D:\Tools2023\sys\zpaqfranz>zpaqfranz r C:\Source D:\Destination -kill -silent
from zpaqfranz.
I need to make a windows 7 VM
Work in progress...
from zpaqfranz.
Hi Mr. Corbelli,
Maybe, my latest test result above can be helpful for you.
from zpaqfranz.
... I am getting closer...
work in progress
And yes, you are right, there IS a problem working with console on Windows 7
from zpaqfranz.
Please try the attached pre-release
58_9c.zip
In this version I have included a detector (filthy rather than dirty) for the Windows version. Before 10 it operates with reduced console manipulations. From 10+ as normal. There is a new flag -noconsole.
from zpaqfranz.
Thank you for your contribution, I have included you in the acknowledgments
from zpaqfranz.
Related Issues (20)
- error with r mode (robocopy) HOT 27
- how to extract a single file? HOT 35
- Bug: -verify -paranoid -test does not work with zpaqfranz a store.zpaq 'long_path_windows_dir' -longpath HOT 4
- Issues with multiple-part archives on Linux HOT 5
- [Wiki] Clone fails because invalid chars in titles HOT 8
- WINDOWS/asmc64.exe license HOT 10
- Does Not Compile On PowerPC MacOS HOT 2
- man/zpaqfranz.pod lists GPL3+ HOT 2
- "zpaqfranz autotest" segfaults on i686 platform HOT 14
- A way to exclude certain files? HOT 8
- Create archives with volumes HOT 10
- Raspberry Pi version HOT 2
- Accelerating backups HOT 18
- A test with the files which actually collide HOT 95
- Minor typo first table. HOT 3
- Possible to provide standalone source code files? HOT 11
- Bus error HOT 30
- Windows x/extract Creates Subfolders When Using -longpath HOT 4
- Request: Wiki Update HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from zpaqfranz.