I just installed the tool, and either I did not get how it works, or it is broken. I a

Please try the following: In the Manage tab of the Marketplace

Here is the log info: <div class="snippet-clipboard-content notranslate position-r

Not working in Cura 5.1,about fieldofview/cura-measuretool

Comments (22)

fieldOfView commented on July 4, 2024 1

I am in Preview mode, so it is not that.

No, that is exactly the problem. The Measure tool does not work in Preview mode. Never has. You can only measure in "Prepare" mode. See #22

from cura-measuretool.

TobiasPSP commented on July 4, 2024

Ekaborating on this, I believe Cura 5.1 has the same issue that was already reported with the beta. I, too, can see one black dot that won't move in any way.

from cura-measuretool.

TobiasPSP commented on July 4, 2024

Not working in Cura 5.2.1 as well, so it seems to be based on a breaking change in Cura. Hope you find the time to look into this, your tool looks so awesomely helpful ;-) and there's really no other way to measure distances it seems.

from cura-measuretool.

fieldOfView commented on July 4, 2024

Please try the following:

In the Manage tab of the Marketplace, uninstall the plugin
Restart Cura (this is important)
Reinstall the plugin from the Marketplace
Restart Cura again

There is an ongoing issue that sometimes Cura will think that it has installed a plugin, but "forgot" to put the files in place. Uninstalling, restarting, reinstalling and restarting again (in that order) fixes that.

from cura-measuretool.

TobiasPSP commented on July 4, 2024

Will try that, thank you. However the tool is showing in Cura, and the dialog where you can change the units is opening just fine, too. Even the initial black dot shows, however it cannot be moved nor does a left-click set a second dot. So the/some files must be in place. It seems rather that my UI actions won’t be recognized by the tool.

So does the tool generally run in Cura 5.1 or 5.2 for you? That would be important to know.

Will try your suggestion when in office and keep you updated.

from cura-measuretool.

fieldOfView commented on July 4, 2024

Sorry, my previous reply was rather unhelpful because I did not fully read your message and I jumped to an incorrect conclusion. There should be little to no use in performing the steps I suggested (but it should not hurt anything either).

The Measure Tool works as expected for me on all supported version (from the top of my head that is Cura 4.0 all the way to 5.2.1). So we are going to have to find out why it is not working for you.

What OS do you use, and do you use a version of Cura downloaded from the Ultimaker site, or another version?
Can you please post a link to your Cura.log (which can be found via Help -> Show configuration folder)?

from cura-measuretool.

TobiasPSP commented on July 4, 2024

I am using Windows 10 (German version with US UI). I got Cura from Ultimaker. I‘ll post the log once I am in office asap. Many thanks for looking into this.

just to make sure it is not something stupid on my end: when selecting your tool, the „black dot“ should be movable by dragging, and a second „dot“ should be settae by clicking into the model, correct?

from cura-measuretool.

fieldOfView commented on July 4, 2024

After activating the measure tool, you should be able to click anywhere on the model to place a dot there. Normally you move the dot that is closest to the mouse pointer, but you can press and hold the shift key to force moving the other dot instead.

from cura-measuretool.

TobiasPSP commented on July 4, 2024

Here is the log info:

2023-01-06 01:14:38,843 - INFO - [MainThread] UM.Qt.QtApplication.__init__ [89]: Adding QT6 plugin path: C:\Program Files\Ultimaker Cura 5.2.1\PyQt6\plugins
2023-01-06 01:14:38,843 - INFO - [MainThread] UM.Qt.QtApplication.__init__ [99]: Adding QT5 plugin path: C:\Program Files\Ultimaker Cura 5.2.1\PyQt6\plugins
2023-01-06 01:14:38,844 - DEBUG - [MainThread] UM.Application.initialize [163]: Initializing Ultimaker Cura
2023-01-06 01:14:38,844 - DEBUG - [MainThread] UM.Application.initialize [164]: App Version 5.2.1
2023-01-06 01:14:38,844 - DEBUG - [MainThread] UM.Application.initialize [165]: Api Version 8.2.0
2023-01-06 01:14:38,845 - DEBUG - [MainThread] UM.Application.initialize [166]: Build type None
2023-01-06 01:14:38,845 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib\uranium must be a folder.
2023-01-06 01:14:38,845 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib64\uranium must be a folder.
2023-01-06 01:14:38,846 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib32\uranium must be a folder.
2023-01-06 01:14:38,846 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\Ultimaker Cura 5.2.1\plugins must be a folder.
2023-01-06 01:14:38,846 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\Resources\uranium\plugins must be a folder.
2023-01-06 01:14:38,847 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\Resources\cura\plugins must be a folder.
2023-01-06 01:14:38,847 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [481]: Initializing storage paths
2023-01-06 01:14:38,847 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [491]: Config storage path is C:\Users\Tobias\AppData\Roaming\cura\5.2
2023-01-06 01:14:38,847 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [499]: Data storage path is C:\Users\Tobias\AppData\Roaming\cura\5.2
2023-01-06 01:14:38,847 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [511]: Cache storage path is C:\Users\Tobias\AppData\Local\cura\5.2\cache
2023-01-06 01:14:38,848 - DEBUG - [MainThread] UM.Resources._copyLatestDirsIfPresent [536]: Found config: ['C:\\Users\\Tobias\\AppData\\Roaming\\cura', 'C:\\Users\\Tobias\\AppData\\Local\\cura'] and data: ['C:\\Users\\Tobias\\AppData\\Roaming\\cura', 'C:\\Users\\Tobias\\AppData\\Local\\cura']
2023-01-06 01:14:38,848 - DEBUG - [MainThread] UM.Resources._copyLatestDirsIfPresent [540]: Latest config path: C:\Users\Tobias\AppData\Roaming\cura\5.1 and latest data path: C:\Users\Tobias\AppData\Roaming\cura\5.1
2023-01-06 01:14:38,848 - INFO - [MainThread] UM.Resources.copyVersionFolder [576]: Copying directory from 'C:\Users\Tobias\AppData\Roaming\cura\5.1' to 'C:\Users\Tobias\AppData\Roaming\cura\5.2'
2023-01-06 01:14:38,848 - INFO - [MainThread] UM.PackageManager.__init__ [56]: Found bundled packages JSON file: C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\bundled_packages\uranium.json
2023-01-06 01:14:38,849 - INFO - [MainThread] UM.PackageManager.__init__ [56]: Found bundled packages JSON file: C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\bundled_packages\cura.json
2023-01-06 01:14:38,849 - DEBUG - [MainThread] UM.View.GL.OpenGLContext.detectBestOpenGLVersion [124]: Trying OpenGL context 4.1...
2023-01-06 01:14:38,849 - DEBUG - [MainThread] UM.View.GL.OpenGLContext.detectBestOpenGLVersion [132]: Yay, we got at least OpenGL 4.1 core: 4.1 Core profile
2023-01-06 01:14:38,849 - DEBUG - [MainThread] UM.Qt.QtApplication.initialize [192]: Detected most suitable OpenGL context version: 4.1 Core profile
2023-01-06 01:14:38,849 - INFO - [MainThread] UM.Qt.QtApplication.initialize [199]: Initializing job queue ...
2023-01-06 01:14:38,850 - INFO - [MainThread] UM.Qt.QtApplication.initialize [203]: Initializing version upgrade manager ...
2023-01-06 01:14:38,850 - INFO - [MainThread] UM.PackageManager._loadManagementData [174]: Loaded bundled packages data from C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\bundled_packages\uranium.json
2023-01-06 01:14:38,850 - INFO - [MainThread] UM.PackageManager._loadManagementData [174]: Loaded bundled packages data from C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\bundled_packages\cura.json
2023-01-06 01:14:38,850 - INFO - [MainThread] UM.PackageManager._loadManagementData [201]: Loaded user packages management file from C:\Users\Tobias\AppData\Roaming\cura\5.2\packages.json
2023-01-06 01:14:38,850 - INFO - [MainThread] UM.PackageManager._removeAllScheduledPackages [280]: Attempting to remove the following scheduled packages: - 
2023-01-06 01:14:38,851 - INFO - [MainThread] UM.PluginRegistry.initializeBeforePluginsAreLoaded [121]: Loading plugin configuration file 'C:\Users\Tobias\AppData\Roaming\cura\5.2\plugins.json'
2023-01-06 01:14:38,851 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib\cura must be a folder.
2023-01-06 01:14:38,852 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin FileLogger 1.0.1
2023-01-06 01:14:38,875 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin LocalContainerProvider 1.0.1
2023-01-06 01:14:38,910 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin LocalFileOutputDevice 1.0.1
2023-01-06 01:14:38,937 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin CameraTool 1.0.1
2023-01-06 01:14:38,963 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin MirrorTool 1.0.1
2023-01-06 01:14:38,990 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin RotateTool 1.0.1
2023-01-06 01:14:39,021 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin ScaleTool 1.0.1
2023-01-06 01:14:39,046 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin SelectionTool 1.0.1
2023-01-06 01:14:39,077 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin TranslateTool 1.0.1
2023-01-06 01:14:39,136 - INFO - [MainThread] UpdateChecker.UpdateChecker.checkNewVersion [69]: Checking for new version

I do notice a couple of warnings regarding a plugin folder however don't understand what it wants to tell me.

from cura-measuretool.

fieldOfView commented on July 4, 2024

This looks like a partial log. Please post a link to the full file instead.

from cura-measuretool.

TobiasPSP commented on July 4, 2024

I am sorry. I just cleared the log, then did a full restart. I noticed some warnings about not being able to create folders so I launched with full Admin privs. Here is the full log:

2023-01-06 13:32:29,296 - INFO - [MainThread] UM.Qt.QtApplication.__init__ [89]: Adding QT6 plugin path: C:\Program Files\Ultimaker Cura 5.2.1\PyQt6\plugins
2023-01-06 13:32:29,296 - INFO - [MainThread] UM.Qt.QtApplication.__init__ [99]: Adding QT5 plugin path: C:\Program Files\Ultimaker Cura 5.2.1\PyQt6\plugins
2023-01-06 13:32:29,296 - DEBUG - [MainThread] UM.Application.initialize [163]: Initializing Ultimaker Cura
2023-01-06 13:32:29,296 - DEBUG - [MainThread] UM.Application.initialize [164]: App Version 5.2.1
2023-01-06 13:32:29,296 - DEBUG - [MainThread] UM.Application.initialize [165]: Api Version 8.2.0
2023-01-06 13:32:29,296 - DEBUG - [MainThread] UM.Application.initialize [166]: Build type None
2023-01-06 13:32:29,296 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib\uranium must be a folder.
2023-01-06 13:32:29,296 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib64\uranium must be a folder.
2023-01-06 13:32:29,296 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib32\uranium must be a folder.
2023-01-06 13:32:29,296 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\Ultimaker Cura 5.2.1\plugins must be a folder.
2023-01-06 13:32:29,296 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\Resources\uranium\plugins must be a folder.
2023-01-06 13:32:29,312 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\Resources\cura\plugins must be a folder.
2023-01-06 13:32:29,312 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [481]: Initializing storage paths
2023-01-06 13:32:29,312 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [491]: Config storage path is C:\Users\Tobias\AppData\Roaming\cura\5.2
2023-01-06 13:32:29,312 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [499]: Data storage path is C:\Users\Tobias\AppData\Roaming\cura\5.2
2023-01-06 13:32:29,312 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [511]: Cache storage path is C:\Users\Tobias\AppData\Local\cura\5.2\cache
2023-01-06 13:32:29,312 - INFO - [MainThread] UM.PackageManager.__init__ [56]: Found bundled packages JSON file: C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\bundled_packages\uranium.json
2023-01-06 13:32:29,312 - INFO - [MainThread] UM.PackageManager.__init__ [56]: Found bundled packages JSON file: C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\bundled_packages\cura.json
2023-01-06 13:32:29,312 - DEBUG - [MainThread] UM.View.GL.OpenGLContext.detectBestOpenGLVersion [124]: Trying OpenGL context 4.1...
2023-01-06 13:32:29,312 - DEBUG - [MainThread] UM.View.GL.OpenGLContext.detectBestOpenGLVersion [132]: Yay, we got at least OpenGL 4.1 core: 4.1 Core profile
2023-01-06 13:32:29,312 - DEBUG - [MainThread] UM.Qt.QtApplication.initialize [192]: Detected most suitable OpenGL context version: 4.1 Core profile
2023-01-06 13:32:29,312 - INFO - [MainThread] UM.Qt.QtApplication.initialize [199]: Initializing job queue ...
2023-01-06 13:32:29,312 - INFO - [MainThread] UM.Qt.QtApplication.initialize [203]: Initializing version upgrade manager ...
2023-01-06 13:32:29,312 - INFO - [MainThread] UM.PackageManager._loadManagementData [174]: Loaded bundled packages data from C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\bundled_packages\uranium.json
2023-01-06 13:32:29,312 - INFO - [MainThread] UM.PackageManager._loadManagementData [174]: Loaded bundled packages data from C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\bundled_packages\cura.json
2023-01-06 13:32:29,312 - INFO - [MainThread] UM.PackageManager._loadManagementData [201]: Loaded user packages management file from C:\Users\Tobias\AppData\Roaming\cura\5.2\packages.json
2023-01-06 13:32:29,312 - INFO - [MainThread] UM.PackageManager._removeAllScheduledPackages [280]: Attempting to remove the following scheduled packages: - 
2023-01-06 13:32:29,312 - INFO - [MainThread] UM.PluginRegistry.initializeBeforePluginsAreLoaded [121]: Loading plugin configuration file 'C:\Users\Tobias\AppData\Roaming\cura\5.2\plugins.json'
2023-01-06 13:32:29,312 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib\cura must be a folder.
2023-01-06 13:32:29,312 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin FileLogger 1.0.1
2023-01-06 13:32:29,312 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin LocalContainerProvider 1.0.1
2023-01-06 13:32:29,328 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin LocalFileOutputDevice 1.0.1
2023-01-06 13:32:29,343 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin CameraTool 1.0.1
2023-01-06 13:32:29,359 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin MirrorTool 1.0.1
2023-01-06 13:32:29,359 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin RotateTool 1.0.1
2023-01-06 13:32:29,374 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin ScaleTool 1.0.1
2023-01-06 13:32:29,390 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin SelectionTool 1.0.1
2023-01-06 13:32:29,406 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin TranslateTool 1.0.1
2023-01-06 13:32:29,437 - INFO - [MainThread] UpdateChecker.UpdateChecker.checkNewVersion [69]: Checking for new version
2023-01-06 13:32:29,437 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin UpdateChecker 1.0.1
2023-01-06 13:32:29,468 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin SimpleView 1.0.1
2023-01-06 13:32:29,499 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin 3MFReader 1.0.1
2023-01-06 13:32:29,515 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin 3MFWriter 1.0.1
2023-01-06 13:32:29,890 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin AMFReader 1.0.0
2023-01-06 13:32:29,922 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin CuraDrive 1.2.0
2023-01-06 13:32:30,140 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.__init__ [96]: Found CuraEngine at: C:\Program Files\Ultimaker Cura 5.2.1\CuraEngine.exe
2023-01-06 13:32:30,156 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin CuraEngineBackend 1.0.1
2023-01-06 13:32:30,156 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [220]: Socket was unable to bind to port, increasing port number to 49675
2023-01-06 13:32:30,156 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [235]: Previous socket existed. Closing that first.
2023-01-06 13:32:30,156 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [360]: Attempting to kill the engine process
2023-01-06 13:32:30,156 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [235]: Previous socket existed. Closing that first.
2023-01-06 13:32:30,171 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin CuraProfileReader 1.0.1
2023-01-06 13:32:30,171 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [192]: Socket state changed to Listening
2023-01-06 13:32:30,171 - INFO - [MainThread] UM.Backend.Backend.startEngine [95]: Started engine process: C:\Program Files\Ultimaker Cura 5.2.1\CuraEngine.exe
2023-01-06 13:32:30,171 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [115]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 5.2.1\\CuraEngine.exe', 'connect', '127.0.0.1:49675', '']
2023-01-06 13:32:30,187 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin CuraProfileWriter 1.0.1
2023-01-06 13:32:30,234 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin DigitalLibrary 1.1.0
2023-01-06 13:32:30,250 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin FirmwareUpdateChecker 1.0.1
2023-01-06 13:32:30,250 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin FirmwareUpdater 1.0.1
2023-01-06 13:32:30,265 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin GCodeGzReader 1.0.1
2023-01-06 13:32:30,281 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin GCodeGzWriter 1.0.1
2023-01-06 13:32:30,281 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin GCodeProfileReader 1.0.1
2023-01-06 13:32:30,312 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin GCodeReader 1.0.1
2023-01-06 13:32:30,312 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin GCodeWriter 1.0.1
2023-01-06 13:32:30,328 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:32:30.332] [info] Connecting to 127.0.0.1:49675
2023-01-06 13:32:30,343 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin ImageReader 1.0.1
2023-01-06 13:32:30,343 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [196]: Socket state changed to Connected
2023-01-06 13:32:30,343 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [185]: Backend connected on port 49675
2023-01-06 13:32:30,359 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin LegacyProfileReader 1.0.1
2023-01-06 13:32:30,359 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin MachineSettingsAction 1.0.1
2023-01-06 13:32:30,406 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [145]: No auth data to retrieve the access_token from
2023-01-06 13:32:30,406 - DEBUG - [MainThread] cura.UltimakerCloud.UltimakerCloudScope.requestHook [30]: User is not logged in for Cloud API request to https://api.ultimaker.com/cura-packages/v1/cura/v8.2.0/packages/package-updates?installed_packages=X3DReader:1.0.1&installed_packages=LocalContainerProvider:1.0.1&installed_packages=GCodeProfileReader:1.0.1&installed_packages=TranslateTool:1.0.1&installed_packages=TrimeshReader:1.0.0&installed_packages=SelectionTool:1.0.1&installed_packages=SimpleView:1.0.1&installed_packages=UM3NetworkPrinting:1.0.1&installed_packages=VersionUpgrade41to42:1.0.0&installed_packages=PreviewStage:1.0.1&installed_packages=PostProcessingPlugin:2.2.1&installed_packages=SliceInfoPlugin:1.0.1&installed_packages=VersionUpgrade21to22:1.0.1&installed_packages=USBPrinting:1.0.2&installed_packages=VersionUpgrade30to31:1.0.1&installed_packages=VersionUpgrade26to27:1.0.1&installed_packages=VersionUpgrade40to41:1.0.1&installed_packages=MeasureTool:1.1.0&installed_packages=CalibrationShapes:2.1.4&installed_packages=MirrorTool:1.0.1&installed_packages=SupportEraser:1.0.1&installed_packages=VersionUpgrade25to26:1.0.1&installed_packages=RemovableDriveOutputDevice:1.0.1&installed_packages=VersionUpgrade44to45:1.0.0&installed_packages=OBJReader:1.0.1&installed_packages=VersionUpgrade462to47:1.0.0&installed_packages=VersionUpgrade49to410:1.0.0&installed_packages=RotateTool:1.0.1&installed_packages=ImageReader:1.0.1&installed_packages=DigitalLibrary:1.1.0&installed_packages=STLWriter:1.0.1&installed_packages=CuraProfileReader:1.0.1&installed_packages=VersionUpgrade411to412:1.0.0&installed_packages=CameraTool:1.0.1&installed_packages=MonitorStage:1.0.1&installed_packages=SolidView:1.0.1&installed_packages=VersionUpgrade32to33:1.0.1&installed_packages=VersionUpgrade27to30:1.0.1&installed_packages=VersionUpgrade35to40:1.0.0&installed_packages=ScaleTool:1.0.1&installed_packages=LocalFileOutputDevice:1.0.1&installed_packages=3MFWriter:1.0.1&installed_packages=VersionUpgrade22to24:1.0.1&installed_packages=PrepareStage:1.0.1&installed_packages=UFPReader:1.0.0&installed_packages=UpdateChecker:1.0.1&installed_packages=XRayView:1.0.1&installed_packages=LegacyProfileReader:1.0.1&installed_packages=3MFReader:1.0.1&installed_packages=SimulationView:1.0.1&installed_packages=VersionUpgrade460to462:1.0.0&installed_packages=AMFReader:1.0.0&installed_packages=GCodeWriter:1.0.1&installed_packages=CuraDrive:1.2.0&installed_packages=OBJWriter:1.0.1&installed_packages=VersionUpgrade47to48:1.0.0&installed_packages=VersionUpgrade48to49:1.0.0&installed_packages=FirmwareUpdateChecker:1.0.1&installed_packages=GCodeReader:1.0.1&installed_packages=SentryLogger:1.0.0&installed_packages=GCodeGzWriter:1.0.1&installed_packages=VersionUpgrade34to35:1.0.1&installed_packages=UltimakerMachineActions:1.0.1&installed_packages=VersionUpgrade45to46:1.0.0&installed_packages=UFPWriter:1.0.1&installed_packages=CuraProfileWriter:1.0.1&installed_packages=CuraEngineBackend:1.0.1&installed_packages=VersionUpgrade33to34:1.0.1&installed_packages=FirmwareUpdater:1.0.1&installed_packages=Marketplace:1.0.0&installed_packages=GCodeGzReader:1.0.1&installed_packages=STLReader:1.0.1&installed_packages=MachineSettingsAction:1.0.1&installed_packages=ConsoleLogger:1.0.1&installed_packages=VersionUpgrade42to43:1.0.0&installed_packages=ModelChecker:1.0.1&installed_packages=VersionUpgrade43to44:1.0.0&installed_packages=FileLogger:1.0.1&installed_packages=XMLMaterialProfile:1.0.1&installed_packages=PerObjectSettingsTool:1.0.1&installed_packages=UltimakerTPLA:1.4.0&installed_packages=GenericPP:1.4.0&installed_packages=PolyPlusPLA:1.0.1&installed_packages=PolyMaxPLA:1.0.1&installed_packages=GenericCPEPlus:1.4.0&installed_packages=GenericGFFCPE:1.4.0&installed_packages=FABtotumPLA:1.4.0&installed_packages=VertexDeltaTPU:1.4.0&installed_packages=UltimakerPP:1.4.0&installed_packages=UltimakerPLA:1.4.0&installed_packages=GenericPC:1.4.0&installed_packages=UltimakerNylon:1.4.0&installed_packages=GenericNylon:1.4.0&installed_packages=FABtotumTPU:1.4.0&installed_packages=Filo3DPLA:1.0.1&installed_packages=FABtotumNylon:1.4.0&installed_packages=VertexDeltaABS:1.4.0&installed_packages=IMADE3DJellyBOXPETG:1.0.1&installed_packages=GenericTPU:1.4.0&installed_packages=GenericPLA:1.4.0&installed_packages=UltimakerBAM:1.4.0&installed_packages=GenericGFFPA:1.4.0&installed_packages=OctofiberPLA:1.0.1&installed_packages=VertexDeltaPLA:1.4.0&installed_packages=GenericToughPLA:1.4.0&installed_packages=GenericPVA:1.4.0&installed_packages=GenericCFFCPE:1.4.0&installed_packages=GenericCFFPA:1.4.0&installed_packages=FiberlogyHDPLA:1.0.1&installed_packages=VertexDeltaPET:1.4.0&installed_packages=UltimakerABS:1.4.0&installed_packages=GenericHIPS:1.4.0&installed_packages=UltimakerTPU:1.4.0&installed_packages=IMADE3DJellyBOXPLA:1.0.1&installed_packages=PolyWoodPLA:1.0.1&installed_packages=FABtotumABS:1.4.0&installed_packages=GenericCPE:1.4.0&installed_packages=GenericABS:1.4.0&installed_packages=DagomaChromatikPLA:1.0.1&installed_packages=PolyFlexPLA:1.0.1&installed_packages=UltimakerCPE:1.4.0&installed_packages=UltimakerCPEP:1.4.0&installed_packages=UltimakerPVA:1.4.0&installed_packages=UltimakerPC:1.4.0&installed_packages=GenericPETG:1.4.0&installed_packages=GenericBAM:1.4.0
2023-01-06 13:32:30,406 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin Marketplace 1.0.0
2023-01-06 13:32:30,421 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin ModelChecker 1.0.1
2023-01-06 13:32:30,437 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin MonitorStage 1.0.1
2023-01-06 13:32:30,437 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin PerObjectSettingsTool 1.0.1
2023-01-06 13:32:30,453 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin PostProcessingPlugin 2.2.1
2023-01-06 13:32:30,453 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin PrepareStage 1.0.1
2023-01-06 13:32:30,468 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin PreviewStage 1.0.1
2023-01-06 13:32:30,484 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin RemovableDriveOutputDevice 1.0.1
2023-01-06 13:32:30,500 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin SimulationView 1.0.1
2023-01-06 13:32:30,515 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin SliceInfoPlugin 1.0.1
2023-01-06 13:32:30,531 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin SolidView 1.0.1
2023-01-06 13:32:30,531 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin SupportEraser 1.0.1
2023-01-06 13:32:30,546 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin TrimeshReader 1.0.0
2023-01-06 13:32:30,562 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin UFPReader 1.0.0
2023-01-06 13:32:30,562 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin UFPWriter 1.0.1
2023-01-06 13:32:30,578 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin UltimakerMachineActions 1.0.1
2023-01-06 13:32:30,671 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin UM3NetworkPrinting 2.0.0
2023-01-06 13:32:30,687 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin USBPrinting 1.0.2
2023-01-06 13:32:30,703 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade21to22 1.0.1
2023-01-06 13:32:30,718 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade22to24 1.0.1
2023-01-06 13:32:30,718 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade25to26 1.0.1
2023-01-06 13:32:30,734 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade26to27 1.0.1
2023-01-06 13:32:30,734 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade27to30 1.0.1
2023-01-06 13:32:30,749 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade30to31 1.0.1
2023-01-06 13:32:30,749 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade32to33 1.0.1
2023-01-06 13:32:30,765 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade33to34 1.0.1
2023-01-06 13:32:30,765 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade34to35 1.0.1
2023-01-06 13:32:30,781 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade35to40 1.0.0
2023-01-06 13:32:30,781 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade40to41 1.0.1
2023-01-06 13:32:30,796 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade411to412 1.0.0
2023-01-06 13:32:30,796 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade413to50 1.0.0
2023-01-06 13:32:30,812 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade41to42 1.0.0
2023-01-06 13:32:30,812 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade42to43 1.0.0
2023-01-06 13:32:30,828 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade43to44 1.0.0
2023-01-06 13:32:30,828 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade44to45 1.0.0
2023-01-06 13:32:30,843 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade45to46 1.0.0
2023-01-06 13:32:30,843 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade460to462 1.0.0
2023-01-06 13:32:30,859 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade462to47 1.0.0
2023-01-06 13:32:30,859 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade47to48 1.0.0
2023-01-06 13:32:30,874 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade48to49 1.0.0
2023-01-06 13:32:30,874 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade49to410 1.0.0
2023-01-06 13:32:30,890 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin X3DReader 1.0.1
2023-01-06 13:32:30,921 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin XmlMaterialProfile 1.0.1
2023-01-06 13:32:30,921 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin XRayView 1.0.1
2023-01-06 13:32:30,999 - DEBUG - [MainThread] CalibrationShapes.CalibrationShapes.__init__ [142]: Info CuraVersion --> 5.2.1
2023-01-06 13:32:30,999 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin CalibrationShapes 2.1.4
2023-01-06 13:32:31,015 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin MeasureTool 1.1.0
2023-01-06 13:32:31,015 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [416]: Loading all plugins took 1.8123555183410645 seconds
2023-01-06 13:32:31,015 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [163]: Looking for old configuration files to upgrade.
2023-01-06 13:32:31,140 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [177]: Checking and performing updates took 0.12499427795410156
2023-01-06 13:32:31,156 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [266]: Completed loading preferences.
2023-01-06 13:32:31,156 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [304]: Created system tray icon.
2023-01-06 13:32:32,530 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [548]: Loading metadata into container registry took 1.3590829372406006 seconds
2023-01-06 13:32:32,546 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [142]: Selected build plate: 0
2023-01-06 13:32:32,546 - DEBUG - [MainThread] cura.CuraApplication.run [827]: Using Conan managed dependencies: cura/5.2.1, pyarcus/5.2.0, standardprojectsettings/0.1.0@ultimaker/stable, sipbuildtool/0.2.2@ultimaker/stable#a636cf06c54e438248f657020656457d, protobuf/3.21.4, zlib/1.2.12#3b9e037ae1c615d045a06c67d88491ae, arcus/5.2.0, cpython/3.10.4#b32bdcfcf86f4dca328f12e1faf40db7, openssl/1.1.1l#de73a8aad9d5a14da8ed43b40592195a, expat/2.4.1#a36c94ae11100f2e3259a9edd4f77055, libffi/3.2.1#33b3eff20f1be5d569235ae100266729, mpdecimal/2.5.0#d8aaabf46cfa93efaadfe66733885102, bzip2/1.0.8#b056f852bd2d5af96fc7171aadfd6c0b, sqlite3/3.36.0#d42a67cd9049135c9d299f26809c4be1, tk/8.6.10#52dd820e70534d4342fe6caec84beaff, tcl/8.6.10#aec77174134a121aaa59321674d1e893, xz_utils/5.2.5#dd8565c00d13a3a6fb2f01214f73a076, curaengine/5.2.1, clipper/6.4.2#4a99df8ff37476a0108cabee338a3cf2, boost/1.79.0, rapidjson/1.1.0#219bf1ea2756b263575da26288753262, stb/20200203#cba8fa43f7a0ea5389896744664823c9, spdlog/1.10.0, fmt/9.0.0, range-v3/0.12.0, pysavitar/5.2.0, savitar/5.2.0, pugixml/1.12.1#5a39f82651eba3e7d6197903a3202e21, pynest2d/5.2.0, nest2d/5.2.0, nlopt/2.7.0#d928ab39fe3f6d91120c738b0de4751c, uranium/5.2.0, fdm_materials/5.2.0, cura_binary_data/5.2.1
2023-01-06 13:32:32,546 - INFO - [MainThread] cura.CuraApplication.run [832]: Initializing machine error checker
2023-01-06 13:32:32,796 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [308]: The definition cache for definition creality_ender3 failed to pickle.
2023-01-06 13:32:32,811 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [74]: Default machine actions added for machine definition [creality_ender3]
2023-01-06 13:32:33,077 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [308]: The definition cache for definition creality_base failed to pickle.
2023-01-06 13:32:33,186 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [190]: Extruder[creality_base_extruder_0 #3] added to [Creality Ender-3 S1] at position [0]
2023-01-06 13:32:33,186 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [79]: No machine with name Creality Ender-3 / Ender-3 v2 in list of firmware to check.
2023-01-06 13:32:33,546 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [120]: Adding container tree for creality_ender3 took 0.35929203033447266 seconds.
2023-01-06 13:32:33,561 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: ChangeAtZ
2023-01-06 13:32:33,561 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: ColorMix
2023-01-06 13:32:33,561 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: CreateThumbnail
2023-01-06 13:32:33,561 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2023-01-06 13:32:33,561 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: DisplayProgressOnLCD
2023-01-06 13:32:33,561 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: FilamentChange
2023-01-06 13:32:33,561 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: InsertAtLayerChange
2023-01-06 13:32:33,577 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: PauseAtHeight
2023-01-06 13:32:33,577 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: RetractContinue
2023-01-06 13:32:33,577 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: SearchAndReplace
2023-01-06 13:32:33,577 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: Stretch
2023-01-06 13:32:33,577 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: TimeLapse
2023-01-06 13:32:33,577 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: UsePreviousProbeMeasurements
2023-01-06 13:32:33,577 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: DisplayPrintInfosOnLCD
2023-01-06 13:32:33,577 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: FlowTower
2023-01-06 13:32:33,593 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: GCodeDocumentation
2023-01-06 13:32:33,593 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: RetractTower
2023-01-06 13:32:33,593 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: SpeedTower
2023-01-06 13:32:33,593 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: TempFanTower
2023-01-06 13:32:33,639 - INFO - [MainThread] cura.CuraApplication.run [837]: Initializing machine manager
2023-01-06 13:32:33,639 - INFO - [MainThread] cura.CuraApplication.run [842]: Initializing container manager
2023-01-06 13:32:33,905 - DEBUG - [JobQueueWorker [0]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0 seconds
2023-01-06 13:32:33,905 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [308]: The definition cache for definition fdmprinter failed to pickle.
2023-01-06 13:32:33,905 - DEBUG - [JobQueueWorker [0]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.0 seconds. 8 input vertices. 8 output vertices.
2023-01-06 13:32:33,905 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.loadAuthDataFromPreferences [258]: Attempting to load the auth data from preferences.
2023-01-06 13:32:33,921 - DEBUG - [MainThread] cura.OAuth2.AuthorizationHelpers.checkToken [115]: Checking the access token for [https://account.ultimaker.com/check-token]
2023-01-06 13:32:33,921 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [235]: Could not find output device with id digital_factory to remove
2023-01-06 13:32:33,936 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2023-01-06 13:32:33,967 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [188]: Loading theme file: C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\themes\cura-light\theme.json
2023-01-06 13:32:34,030 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [323]: Loaded theme C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\themes\cura-light
2023-01-06 13:32:34,030 - INFO - [MainThread] UM.Qt.Bindings.Theme.load [324]: System's em size is 13px.
2023-01-06 13:32:34,030 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [164]: New error check scheduled.
2023-01-06 13:32:34,030 - DEBUG - [MainThread] cura.API.Account._sync [236]: Starting a new sync while previous sync was not completed
2023-01-06 13:32:34,030 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.callback [271]: Auth data was successfully loaded
2023-01-06 13:32:34,421 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [344]: Creating post processing plugin view.
2023-01-06 13:32:34,499 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [354]: Post processing view created.
2023-01-06 13:32:34,670 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/Settings/SettingView.qml:40:9: QML TextField: Binding loop detected for property "implicitHeight"
2023-01-06 13:32:34,670 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/Settings/SettingView.qml:40:9: QML TextField: Binding loop detected for property "implicitHeight"
2023-01-06 13:32:34,702 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/PyQt6/Qt6/qml/UM/MenuItem.qml:19:5: QML Shortcut: Shortcut: Only binding to one of multiple key bindings associated with 66. Use 'sequences: [ <key> ]' to bind to all of them.
2023-01-06 13:32:34,717 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/PyQt6/Qt6/qml/UM/MenuItem.qml:19:5: QML Shortcut: Shortcut: Only binding to one of multiple key bindings associated with 12. Use 'sequences: [ <key> ]' to bind to all of them.
2023-01-06 13:32:34,717 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/PyQt6/Qt6/qml/UM/MenuItem.qml:19:5: QML Shortcut: Shortcut: Only binding to one of multiple key bindings associated with 11. Use 'sequences: [ <key> ]' to bind to all of them.
2023-01-06 13:32:34,967 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2023-01-06 13:32:35,217 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/Menus/SettingsMenu.qml:22:9: QML Menu: Binding loop detected for property "width"
2023-01-06 13:32:35,217 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/Menus/SettingsMenu.qml:22:9: QML Menu: Binding loop detected for property "width"
2023-01-06 13:32:35,295 - DEBUG - [MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [586]: Calculating normals took 0.01562047004699707 seconds
2023-01-06 13:32:35,295 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PrepareStage
2023-01-06 13:32:35,358 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2023-01-06 13:32:35,592 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SolidView
2023-01-06 13:32:35,608 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [118]: Creating model checker view.
2023-01-06 13:32:35,608 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [127]: Model checker view created.
2023-01-06 13:32:35,608 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [76]: Creating dialog [MoreInfoWindow.qml]
2023-01-06 13:32:35,655 - DEBUG - [MainThread] cura.CuraApplication.run [883]: Booting Cura took 6.565918922424316 seconds
2023-01-06 13:32:35,655 - DEBUG - [JobQueueWorker [1]] cura.Machines.ContainerTree.run [174]: Started background loading of MachineNodes
2023-01-06 13:32:35,669 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 13:32:35,686 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel.
2023-01-06 13:32:35,833 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-01-06 13:32:35,904 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 13:32:35,905 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 13:32:35,907 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 13:32:36,144 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:28:17: QML PrintSetupSelectorHeader: Qt Quick Layouts: Polish loop detected. Aborting after two iterations.
2023-01-06 13:32:36,276 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [211]: Support for Vertex Array Objects: True
2023-01-06 13:32:36,280 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [121]: Initialized OpenGL subsystems.
2023-01-06 13:32:36,281 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [122]: OpenGL Version:  4.1.0 - Build 22.20.16.4836
2023-01-06 13:32:36,282 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [123]: OpenGL Vendor:   Intel
2023-01-06 13:32:36,282 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [124]: OpenGL Renderer: Intel(R) HD Graphics 630
2023-01-06 13:32:36,283 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [125]: GLSL Version:    4.10.0
2023-01-06 13:32:36,284 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\default.shader]...
2023-01-06 13:32:36,292 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\selection.shader]...
2023-01-06 13:32:36,299 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\select_face.shader]...
2023-01-06 13:32:36,305 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\default.shader]...
2023-01-06 13:32:36,312 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\composite.shader]...
2023-01-06 13:32:36,324 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\overhang.shader]...
2023-01-06 13:32:36,336 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\striped.shader]...
2023-01-06 13:32:36,348 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\transparent_object.shader]...
2023-01-06 13:32:36,357 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\striped.shader]...
2023-01-06 13:32:36,369 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\xray.shader]...
2023-01-06 13:32:36,375 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\xray_composite.shader]...
2023-01-06 13:32:36,389 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\platform.shader]...
2023-01-06 13:32:36,408 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\xray.shader]...
2023-01-06 13:32:36,525 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel.
2023-01-06 13:32:36,673 - DEBUG - [JobQueueWorker [1]] cura.Machines.ContainerTree.run [185]: All MachineNode loading completed
2023-01-06 13:32:36,713 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\default.shader]...
2023-01-06 13:32:36,722 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\grid.shader]...
2023-01-06 13:32:37,251 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [221]: Error check finished, result = False, time = 3.22s
2023-01-06 13:32:46,766 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.015621423721313477 seconds
2023-01-06 13:32:50,869 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/MainWindow/ApplicationMenu.qml:51:9: QML FileMenu: Binding loop detected for property "width"
2023-01-06 13:33:37,984 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-01-06 13:34:38,650 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-01-06 13:35:39,153 - DEBUG - [MainThread] cura.OAuth2.AuthorizationHelpers.getAccessTokenUsingRefreshToken [64]: Refreshing the access token for [https://account.ultimaker.com]
2023-01-06 13:35:39,153 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-01-06 13:35:39,153 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-01-06 13:35:39,325 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._storeAuthData [289]: Attempting to store the auth data for [https://account.ultimaker.com]
2023-01-06 13:35:39,684 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-01-06 13:35:49,335 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.0 seconds
2023-01-06 13:36:39,747 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-01-06 13:37:40,184 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-01-06 13:38:42,486 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-01-06 13:39:42,654 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-01-06 13:39:58,061 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/MainWindow/ApplicationMenu.qml:51:9: QML FileMenu: Binding loop detected for property "width"
2023-01-06 13:40:38,877 - INFO - [MainThread] cura.CuraApplication.readLocalFile [1774]: Attempting to read file file://192.168.2.106/scan/Tobias/Icons/svg/RemoteErgo_5Way v9.stl
2023-01-06 13:40:38,981 - DEBUG - [JobQueueWorker [2]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.003988504409790039 seconds
2023-01-06 13:40:38,984 - DEBUG - [JobQueueWorker [2]] STLReader.STLReader._read [68]: Loaded a mesh with 153636 vertices
2023-01-06 13:40:39,069 - DEBUG - [JobQueueWorker [2]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.07478618621826172 seconds. 1959 input vertices. 1959 output vertices.
2023-01-06 13:40:39,090 - DEBUG - [JobQueueWorker [2]] UM.FileHandler.ReadFileJob.run [83]: Loading file took 0.2 seconds
2023-01-06 13:40:39,151 - DEBUG - [JobQueueWorker [2]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.06084012985229492 seconds. 1958 input vertices. 1958 output vertices.
2023-01-06 13:40:39,160 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x000002359163A8F0>, took 1ms
2023-01-06 13:40:39,167 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=2) RotateOp.(node=<CuraSceneNode object: 'RemoteErgo_5Way v9.stl'>,rot.=Q<0.0,0.0,0.0,w=4.0>) TranslateOp.(node=<CuraSceneNode object: 'RemoteErgo_5Way v9.stl'>,trans.=<0.000,0.000,0.000>), took 1ms
2023-01-06 13:40:39,422 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\transparent_object.shader]...
2023-01-06 13:40:41,406 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend._createSnapshot [275]: Creating thumbnail image (just before slice)...
2023-01-06 13:40:41,407 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2023-01-06 13:40:41,409 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\overhang.shader]...
2023-01-06 13:40:41,421 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\transparent_object.shader]...
2023-01-06 13:40:41,430 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\striped.shader]...
2023-01-06 13:40:41,640 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [290]: Starting to slice...
2023-01-06 13:40:41,640 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [309]: Going to slice build plate [0]!
2023-01-06 13:40:41,885 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [516]: Sending slice message took 0.24434661865234375 seconds
2023-01-06 13:40:42,024 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:42.024] [warning] Mesh has overlapping faces!
2023-01-06 13:40:42,026 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:42.026] [info] Progress: start accomplished in   0s
2023-01-06 13:40:42,027 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:42.026] [info] Starting slice...
2023-01-06 13:40:42,028 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:42.026] [info] Slicing model...
2023-01-06 13:40:42,034 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:42.034] [info] Slice of mesh took   0 seconds
2023-01-06 13:40:42,042 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:42.042] [info] Make polygons took 0.016000000294297934 seconds
2023-01-06 13:40:42,043 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:42.043] [info] Progress: slice accomplished in 0.016000000294297934s
2023-01-06 13:40:42,044 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:42.043] [info] Starting layerparts...
2023-01-06 13:40:42,054 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:42.054] [info] Progress: layerparts accomplished in   0s
2023-01-06 13:40:42,055 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:42.054] [info] Starting inset+skin...
2023-01-06 13:40:43,121 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:43.121] [info] Layer count: 73
2023-01-06 13:40:43,121 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:43.121] [info] Progress: inset+skin accomplished in 1.0779999997466803s
2023-01-06 13:40:43,122 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:43.121] [info] Starting support...
2023-01-06 13:40:43,419 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:43.419] [info] Progress: support accomplished in 0.29700000025331974s
2023-01-06 13:40:43,420 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:43.419] [info] Starting export...
2023-01-06 13:40:43,678 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-01-06 13:40:44,324 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:44.324] [info] Progress: export accomplished in 0.9059999999590218s
2023-01-06 13:40:44,330 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:44.329] [info] Sending 73 layers.
2023-01-06 13:40:44,330 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:44.329] [info] Total time elapsed 2.2970000002533197s.
2023-01-06 13:40:44,331 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] 
2023-01-06 13:40:44,331 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:44.330] [info] Print time (s): 17316
2023-01-06 13:40:44,332 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:44.330] [info] Print time (hr|min|s): 4h 48m 36s
2023-01-06 13:40:44,332 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:44.330] [info] Filament (mm^3): 39836
2023-01-06 13:40:44,582 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 13:40:44.581] [info] Closing connection.
2023-01-06 13:40:44,807 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] 
2023-01-06 13:40:44,808 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] Cura_SteamEngine version 5.2.1
2023-01-06 13:40:44,809 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] Copyright (C) 2022 Ultimaker
2023-01-06 13:40:44,809 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] 
2023-01-06 13:40:44,810 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] This program is free software: you can redistribute it and/or modify
2023-01-06 13:40:44,811 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] it under the terms of the GNU Affero General Public License as published by
2023-01-06 13:40:44,811 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] the Free Software Foundation, either version 3 of the License, or
2023-01-06 13:40:44,812 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] (at your option) any later version.
2023-01-06 13:40:44,813 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] 
2023-01-06 13:40:44,813 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] This program is distributed in the hope that it will be useful,
2023-01-06 13:40:44,814 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2023-01-06 13:40:44,815 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2023-01-06 13:40:44,815 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] GNU Affero General Public License for more details.
2023-01-06 13:40:44,816 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] 
2023-01-06 13:40:44,817 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] You should have received a copy of the GNU Affero General Public License
2023-01-06 13:40:44,817 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2023-01-06 13:40:44,843 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [770]: Slicing took 3.202010154724121 seconds
2023-01-06 13:40:44,844 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [771]: Number of models per buildplate: {0: 1}
2023-01-06 13:40:44,844 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [785]: See if there is more to slice...
2023-01-06 13:40:44,845 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [200]: Socket state changed to Closing
2023-01-06 13:40:44,846 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [224]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2023-01-06 13:40:44,846 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [202]: Socket state changed to Closed
2023-01-06 13:40:44,859 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [969]: Backend finished slicing. Resetting process and socket.
2023-01-06 13:40:46,886 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PreviewStage
2023-01-06 13:40:46,897 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SimulationView
2023-01-06 13:40:46,900 - DEBUG - [MainThread] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0 seconds
2023-01-06 13:40:46,901 - DEBUG - [MainThread] STLReader.STLReader._read [68]: Loaded a mesh with 12612 vertices
2023-01-06 13:40:46,902 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\plugins\SimulationView\simulationview_composite.shader]...
2023-01-06 13:40:46,931 - DEBUG - [JobQueueWorker [4]] CuraEngineBackend.ProcessSlicedLayersJob.run [74]: Processing new layer for build plate 0...
2023-01-06 13:40:47,119 - DEBUG - [JobQueueWorker [4]] CuraEngineBackend.ProcessSlicedLayersJob.run [254]: Processing layers took 0.18752717971801758 seconds
2023-01-06 13:40:47,124 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\color.shader]...
2023-01-06 13:40:47,131 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\plugins\SimulationView\layers3d.shader]...
2023-01-06 13:40:47,198 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\plugins\SimulationView\layers3d_shadow.shader]...
2023-01-06 13:40:47,240 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\toolhandle.shader]...
2023-01-06 13:40:47,247 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\color.shader]...
2023-01-06 13:40:47,253 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\striped.shader]...
2023-01-06 13:40:47,327 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onProcessLayersFinished [1006]: See if there is more to slice(2)...
2023-01-06 13:40:49,255 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.01618814468383789 seconds
2023-01-06 13:40:57,514 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\toolhandle.shader]...
2023-01-06 13:40:59,014 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\toolhandle.shader]...
2023-01-06 13:41:12,738 - DEBUG - [MainThread] cura.TaskManagement.OnExitCallbackManager.triggerNextCallback [56]: No more on-app-exit callbacks to process. Tell the app to exit.
2023-01-06 13:41:12,739 - INFO - [MainThread] cura.CuraApplication.closeApplication [626]: Close application
2023-01-06 13:41:12,739 - INFO - [MainThread] cura.CuraApplication._setLoadingHint [819]: Initializing Active Machine...
2023-01-06 13:41:12,748 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 13:41:12,749 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [96]: No active GlobalStack, set quality profile model as empty.
2023-01-06 13:41:12,750 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 13:41:12,750 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [96]: No active GlobalStack, set quality profile model as empty.
2023-01-06 13:41:12,751 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:67: TypeError: Cannot read property 'name' of null
2023-01-06 13:41:12,754 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2023-01-06 13:41:12,766 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 13:41:12,766 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [96]: No active GlobalStack, set quality profile model as empty.
2023-01-06 13:41:12,767 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 13:41:12,767 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [96]: No active GlobalStack, set quality profile model as empty.
2023-01-06 13:41:12,768 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:67: TypeError: Cannot read property 'name' of null
2023-01-06 13:41:12,769 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2023-01-06 13:41:12,828 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:237:25: Unable to assign QString to QRegularExpression
2023-01-06 13:41:12,836 - DEBUG - [MainThread] UM.Qt.QtApplication.windowClosed [508]: Shutting down cura
2023-01-06 13:41:12,860 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [360]: Attempting to kill the engine process

from cura-measuretool.

TobiasPSP commented on July 4, 2024

side note: launching with full admin privs, makes no difference in tool behavior.

from cura-measuretool.

fieldOfView commented on July 4, 2024

side note: launching Cura with admin privileges is generally not a good idea because it will lead to situations where Cura can not write to certain folders.

from cura-measuretool.

fieldOfView commented on July 4, 2024

There is nothing overtly suspect in these logs. It would be helpful if you could post another set of logs where you actually activate the measure tool and click on a model a couple of times.

from cura-measuretool.

TobiasPSP commented on July 4, 2024

Actually I did that while creating the log I posted. Nothing else showed up in the log. I‘ll try again, and I‘ll do a fresh install on a different machine to see whether it repros.

from cura-measuretool.

TobiasPSP commented on July 4, 2024

Is there a verbose mode for the log that I should turn on?

from cura-measuretool.

fieldOfView commented on July 4, 2024

In the logs I see that you are in the "Preview" tab. The measure tool does not work in the "Preview" tab, only in the "Prepare" tab. Does your Cura start up in the "Preview" tab?

from cura-measuretool.

fieldOfView commented on July 4, 2024

If switching to the "Prepare" view fixes the issue. then this is a duplicate of #22

from cura-measuretool.

TobiasPSP commented on July 4, 2024

I am in Preview mode, so it is not that.
I now went ahead and freshly installed the latest Cura version (5.2.1) directly from Ultimaker on a different PC, also Win10, also a German OS with US GUI.
I can repro the issue there, same problem.
I then went ahead and did as requested, tried to click and move (which does not do anything obviously as this is the issue we are discussing).

Here's the log from that new machine:

2023-01-06 17:40:03,742 - INFO - [MainThread] UM.Qt.QtApplication.__init__ [89]: Adding QT6 plugin path: C:\Program Files\Ultimaker Cura 5.2.1\PyQt6\plugins
2023-01-06 17:40:03,742 - INFO - [MainThread] UM.Qt.QtApplication.__init__ [99]: Adding QT5 plugin path: C:\Program Files\Ultimaker Cura 5.2.1\PyQt6\plugins
2023-01-06 17:40:03,742 - DEBUG - [MainThread] UM.Application.initialize [163]: Initializing Ultimaker Cura
2023-01-06 17:40:03,742 - DEBUG - [MainThread] UM.Application.initialize [164]: App Version 5.2.1
2023-01-06 17:40:03,742 - DEBUG - [MainThread] UM.Application.initialize [165]: Api Version 8.2.0
2023-01-06 17:40:03,742 - DEBUG - [MainThread] UM.Application.initialize [166]: Build type None
2023-01-06 17:40:03,742 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib\uranium must be a folder.
2023-01-06 17:40:03,742 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib64\uranium must be a folder.
2023-01-06 17:40:03,742 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib32\uranium must be a folder.
2023-01-06 17:40:03,742 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\Ultimaker Cura 5.2.1\plugins must be a folder.
2023-01-06 17:40:03,742 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\Resources\uranium\plugins must be a folder.
2023-01-06 17:40:03,742 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\Resources\cura\plugins must be a folder.
2023-01-06 17:40:03,742 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [481]: Initializing storage paths
2023-01-06 17:40:03,742 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [491]: Config storage path is C:\Users\tobia\AppData\Roaming\cura\5.2
2023-01-06 17:40:03,742 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [499]: Data storage path is C:\Users\tobia\AppData\Roaming\cura\5.2
2023-01-06 17:40:03,742 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [511]: Cache storage path is C:\Users\tobia\AppData\Local\cura\5.2\cache
2023-01-06 17:40:03,742 - INFO - [MainThread] UM.PackageManager.__init__ [56]: Found bundled packages JSON file: C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\bundled_packages\cura.json
2023-01-06 17:40:03,742 - INFO - [MainThread] UM.PackageManager.__init__ [56]: Found bundled packages JSON file: C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\bundled_packages\uranium.json
2023-01-06 17:40:03,742 - DEBUG - [MainThread] UM.View.GL.OpenGLContext.detectBestOpenGLVersion [124]: Trying OpenGL context 4.1...
2023-01-06 17:40:03,742 - DEBUG - [MainThread] UM.View.GL.OpenGLContext.detectBestOpenGLVersion [132]: Yay, we got at least OpenGL 4.1 core: 4.1 Core profile
2023-01-06 17:40:03,742 - DEBUG - [MainThread] UM.Qt.QtApplication.initialize [192]: Detected most suitable OpenGL context version: 4.1 Core profile
2023-01-06 17:40:03,742 - INFO - [MainThread] UM.Qt.QtApplication.initialize [199]: Initializing job queue ...
2023-01-06 17:40:03,742 - INFO - [MainThread] UM.Qt.QtApplication.initialize [203]: Initializing version upgrade manager ...
2023-01-06 17:40:03,742 - INFO - [MainThread] UM.PackageManager._loadManagementData [174]: Loaded bundled packages data from C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\bundled_packages\cura.json
2023-01-06 17:40:03,742 - INFO - [MainThread] UM.PackageManager._loadManagementData [174]: Loaded bundled packages data from C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\bundled_packages\uranium.json
2023-01-06 17:40:03,742 - INFO - [MainThread] UM.PackageManager._loadManagementData [201]: Loaded user packages management file from C:\Users\tobia\AppData\Roaming\cura\5.2\packages.json
2023-01-06 17:40:03,742 - INFO - [MainThread] UM.PackageManager._removeAllScheduledPackages [280]: Attempting to remove the following scheduled packages: - 
2023-01-06 17:40:03,742 - INFO - [MainThread] UM.PluginRegistry.initializeBeforePluginsAreLoaded [121]: Loading plugin configuration file 'C:\Users\tobia\AppData\Roaming\cura\5.2\plugins.json'
2023-01-06 17:40:03,742 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib\cura must be a folder.
2023-01-06 17:40:03,759 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin FileLogger 1.0.1
2023-01-06 17:40:03,777 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin LocalContainerProvider 1.0.1
2023-01-06 17:40:03,798 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin LocalFileOutputDevice 1.0.1
2023-01-06 17:40:03,819 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin CameraTool 1.0.1
2023-01-06 17:40:03,839 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin MirrorTool 1.0.1
2023-01-06 17:40:03,873 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin RotateTool 1.0.1
2023-01-06 17:40:03,890 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin ScaleTool 1.0.1
2023-01-06 17:40:03,909 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin SelectionTool 1.0.1
2023-01-06 17:40:03,929 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin TranslateTool 1.0.1
2023-01-06 17:40:03,946 - INFO - [MainThread] UpdateChecker.UpdateChecker.checkNewVersion [69]: Checking for new version
2023-01-06 17:40:03,965 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin UpdateChecker 1.0.1
2023-01-06 17:40:04,014 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin SimpleView 1.0.1
2023-01-06 17:40:04,068 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin 3MFReader 1.0.1
2023-01-06 17:40:04,093 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin 3MFWriter 1.0.1
2023-01-06 17:40:04,440 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin AMFReader 1.0.0
2023-01-06 17:40:04,465 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin CuraDrive 1.2.0
2023-01-06 17:40:04,683 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.__init__ [96]: Found CuraEngine at: C:\Program Files\Ultimaker Cura 5.2.1\CuraEngine.exe
2023-01-06 17:40:04,686 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin CuraEngineBackend 1.0.1
2023-01-06 17:40:04,695 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [192]: Socket state changed to Listening
2023-01-06 17:40:04,699 - INFO - [MainThread] UM.Backend.Backend.startEngine [95]: Started engine process: C:\Program Files\Ultimaker Cura 5.2.1\CuraEngine.exe
2023-01-06 17:40:04,704 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [115]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 5.2.1\\CuraEngine.exe', 'connect', '127.0.0.1:49674', '']
2023-01-06 17:40:04,720 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin CuraProfileReader 1.0.1
2023-01-06 17:40:04,737 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin CuraProfileWriter 1.0.1
2023-01-06 17:40:04,791 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin DigitalLibrary 1.1.0
2023-01-06 17:40:04,815 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin FirmwareUpdateChecker 1.0.1
2023-01-06 17:40:04,828 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin FirmwareUpdater 1.0.1
2023-01-06 17:40:04,845 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin GCodeGzReader 1.0.1
2023-01-06 17:40:04,857 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin GCodeGzWriter 1.0.1
2023-01-06 17:40:04,867 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:04.867] [info] Connecting to 127.0.0.1:49674
2023-01-06 17:40:04,881 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin GCodeProfileReader 1.0.1
2023-01-06 17:40:04,882 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [196]: Socket state changed to Connected
2023-01-06 17:40:04,882 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [185]: Backend connected on port 49674
2023-01-06 17:40:04,905 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin GCodeReader 1.0.1
2023-01-06 17:40:04,921 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin GCodeWriter 1.0.1
2023-01-06 17:40:04,941 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin ImageReader 1.0.1
2023-01-06 17:40:04,958 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin LegacyProfileReader 1.0.1
2023-01-06 17:40:04,975 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin MachineSettingsAction 1.0.1
2023-01-06 17:40:05,015 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [145]: No auth data to retrieve the access_token from
2023-01-06 17:40:05,015 - DEBUG - [MainThread] cura.UltimakerCloud.UltimakerCloudScope.requestHook [30]: User is not logged in for Cloud API request to https://api.ultimaker.com/cura-packages/v1/cura/v8.2.0/packages/package-updates?installed_packages=XRayView:1.0.1&installed_packages=RemovableDriveOutputDevice:1.0.1&installed_packages=VersionUpgrade34to35:1.0.1&installed_packages=Marketplace:1.0.0&installed_packages=CuraDrive:1.2.0&installed_packages=LegacyProfileReader:1.0.1&installed_packages=GCodeGzWriter:1.0.1&installed_packages=CuraProfileReader:1.0.1&installed_packages=UFPWriter:1.0.1&installed_packages=VersionUpgrade45to46:1.0.0&installed_packages=VersionUpgrade47to48:1.0.0&installed_packages=MirrorTool:1.0.1&installed_packages=VersionUpgrade26to27:1.0.1&installed_packages=ImageReader:1.0.1&installed_packages=VersionUpgrade44to45:1.0.0&installed_packages=PrepareStage:1.0.1&installed_packages=PreviewStage:1.0.1&installed_packages=GCodeWriter:1.0.1&installed_packages=SelectionTool:1.0.1&installed_packages=VersionUpgrade33to34:1.0.1&installed_packages=GCodeProfileReader:1.0.1&installed_packages=VersionUpgrade25to26:1.0.1&installed_packages=LocalContainerProvider:1.0.1&installed_packages=VersionUpgrade49to410:1.0.0&installed_packages=SentryLogger:1.0.0&installed_packages=SupportEraser:1.0.1&installed_packages=VersionUpgrade27to30:1.0.1&installed_packages=UpdateChecker:1.0.1&installed_packages=VersionUpgrade35to40:1.0.0&installed_packages=MonitorStage:1.0.1&installed_packages=CuraProfileWriter:1.0.1&installed_packages=UFPReader:1.0.0&installed_packages=MeasureTool:1.1.0&installed_packages=VersionUpgrade462to47:1.0.0&installed_packages=SolidView:1.0.1&installed_packages=LocalFileOutputDevice:1.0.1&installed_packages=AMFReader:1.0.0&installed_packages=FirmwareUpdateChecker:1.0.1&installed_packages=VersionUpgrade22to24:1.0.1&installed_packages=FileLogger:1.0.1&installed_packages=OBJWriter:1.0.1&installed_packages=3MFReader:1.0.1&installed_packages=STLReader:1.0.1&installed_packages=CameraTool:1.0.1&installed_packages=RotateTool:1.0.1&installed_packages=ConsoleLogger:1.0.1&installed_packages=SliceInfoPlugin:1.0.1&installed_packages=VersionUpgrade41to42:1.0.0&installed_packages=OBJReader:1.0.1&installed_packages=VersionUpgrade40to41:1.0.1&installed_packages=GCodeReader:1.0.1&installed_packages=PerObjectSettingsTool:1.0.1&installed_packages=ModelChecker:1.0.1&installed_packages=USBPrinting:1.0.2&installed_packages=ScaleTool:1.0.1&installed_packages=VersionUpgrade460to462:1.0.0&installed_packages=TranslateTool:1.0.1&installed_packages=VersionUpgrade21to22:1.0.1&installed_packages=DigitalLibrary:1.1.0&installed_packages=GCodeGzReader:1.0.1&installed_packages=PostProcessingPlugin:2.2.1&installed_packages=FirmwareUpdater:1.0.1&installed_packages=3MFWriter:1.0.1&installed_packages=CuraEngineBackend:1.0.1&installed_packages=UltimakerMachineActions:1.0.1&installed_packages=VersionUpgrade42to43:1.0.0&installed_packages=STLWriter:1.0.1&installed_packages=VersionUpgrade32to33:1.0.1&installed_packages=VersionUpgrade30to31:1.0.1&installed_packages=VersionUpgrade48to49:1.0.0&installed_packages=MachineSettingsAction:1.0.1&installed_packages=SimulationView:1.0.1&installed_packages=TrimeshReader:1.0.0&installed_packages=X3DReader:1.0.1&installed_packages=UM3NetworkPrinting:1.0.1&installed_packages=SimpleView:1.0.1&installed_packages=XMLMaterialProfile:1.0.1&installed_packages=VersionUpgrade43to44:1.0.0&installed_packages=VersionUpgrade411to412:1.0.0&installed_packages=GenericCFFPA:1.4.0&installed_packages=UltimakerPC:1.4.0&installed_packages=UltimakerPVA:1.4.0&installed_packages=PolyPlusPLA:1.0.1&installed_packages=GenericGFFCPE:1.4.0&installed_packages=UltimakerPP:1.4.0&installed_packages=UltimakerCPE:1.4.0&installed_packages=UltimakerBAM:1.4.0&installed_packages=VertexDeltaPET:1.4.0&installed_packages=GenericBAM:1.4.0&installed_packages=GenericCFFCPE:1.4.0&installed_packages=GenericGFFPA:1.4.0&installed_packages=UltimakerCPEP:1.4.0&installed_packages=OctofiberPLA:1.0.1&installed_packages=GenericToughPLA:1.4.0&installed_packages=IMADE3DJellyBOXPLA:1.0.1&installed_packages=UltimakerPLA:1.4.0&installed_packages=GenericABS:1.4.0&installed_packages=PolyWoodPLA:1.0.1&installed_packages=GenericCPE:1.4.0&installed_packages=GenericNylon:1.4.0&installed_packages=FABtotumTPU:1.4.0&installed_packages=UltimakerABS:1.4.0&installed_packages=DagomaChromatikPLA:1.0.1&installed_packages=Filo3DPLA:1.0.1&installed_packages=UltimakerNylon:1.4.0&installed_packages=VertexDeltaPLA:1.4.0&installed_packages=FABtotumABS:1.4.0&installed_packages=GenericPP:1.4.0&installed_packages=FABtotumPLA:1.4.0&installed_packages=GenericCPEPlus:1.4.0&installed_packages=VertexDeltaTPU:1.4.0&installed_packages=GenericPVA:1.4.0&installed_packages=GenericPLA:1.4.0&installed_packages=GenericPC:1.4.0&installed_packages=GenericPETG:1.4.0&installed_packages=VertexDeltaABS:1.4.0&installed_packages=FABtotumNylon:1.4.0&installed_packages=FiberlogyHDPLA:1.0.1&installed_packages=IMADE3DJellyBOXPETG:1.0.1&installed_packages=GenericTPU:1.4.0&installed_packages=UltimakerTPLA:1.4.0&installed_packages=PolyMaxPLA:1.0.1&installed_packages=UltimakerTPU:1.4.0&installed_packages=PolyFlexPLA:1.0.1&installed_packages=GenericHIPS:1.4.0
2023-01-06 17:40:05,023 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin Marketplace 1.0.0
2023-01-06 17:40:05,055 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin ModelChecker 1.0.1
2023-01-06 17:40:05,079 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin MonitorStage 1.0.1
2023-01-06 17:40:05,093 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin PerObjectSettingsTool 1.0.1
2023-01-06 17:40:05,113 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin PostProcessingPlugin 2.2.1
2023-01-06 17:40:05,136 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin PrepareStage 1.0.1
2023-01-06 17:40:05,152 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin PreviewStage 1.0.1
2023-01-06 17:40:05,174 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin RemovableDriveOutputDevice 1.0.1
2023-01-06 17:40:05,213 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin SimulationView 1.0.1
2023-01-06 17:40:05,227 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin SliceInfoPlugin 1.0.1
2023-01-06 17:40:05,246 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin SolidView 1.0.1
2023-01-06 17:40:05,265 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin SupportEraser 1.0.1
2023-01-06 17:40:05,282 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin TrimeshReader 1.0.0
2023-01-06 17:40:05,297 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin UFPReader 1.0.0
2023-01-06 17:40:05,313 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin UFPWriter 1.0.1
2023-01-06 17:40:05,333 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin UltimakerMachineActions 1.0.1
2023-01-06 17:40:05,446 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin UM3NetworkPrinting 2.0.0
2023-01-06 17:40:05,492 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin USBPrinting 1.0.2
2023-01-06 17:40:05,510 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade21to22 1.0.1
2023-01-06 17:40:05,531 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade22to24 1.0.1
2023-01-06 17:40:05,548 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade25to26 1.0.1
2023-01-06 17:40:05,560 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade26to27 1.0.1
2023-01-06 17:40:05,575 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade27to30 1.0.1
2023-01-06 17:40:05,591 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade30to31 1.0.1
2023-01-06 17:40:05,609 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade32to33 1.0.1
2023-01-06 17:40:05,621 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade33to34 1.0.1
2023-01-06 17:40:05,632 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade34to35 1.0.1
2023-01-06 17:40:05,655 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade35to40 1.0.0
2023-01-06 17:40:05,672 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade40to41 1.0.1
2023-01-06 17:40:05,686 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade411to412 1.0.0
2023-01-06 17:40:05,711 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade413to50 1.0.0
2023-01-06 17:40:05,724 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade41to42 1.0.0
2023-01-06 17:40:05,743 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade42to43 1.0.0
2023-01-06 17:40:05,757 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade43to44 1.0.0
2023-01-06 17:40:05,778 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade44to45 1.0.0
2023-01-06 17:40:05,789 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade45to46 1.0.0
2023-01-06 17:40:05,805 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade460to462 1.0.0
2023-01-06 17:40:05,816 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade462to47 1.0.0
2023-01-06 17:40:05,828 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade47to48 1.0.0
2023-01-06 17:40:05,848 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade48to49 1.0.0
2023-01-06 17:40:05,860 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin VersionUpgrade49to410 1.0.0
2023-01-06 17:40:05,884 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin X3DReader 1.0.1
2023-01-06 17:40:05,912 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin XmlMaterialProfile 1.0.1
2023-01-06 17:40:05,924 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin XRayView 1.0.1
2023-01-06 17:40:05,947 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [493]: Loaded plugin MeasureTool 1.1.0
2023-01-06 17:40:05,948 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [416]: Loading all plugins took 2.335024833679199 seconds
2023-01-06 17:40:05,976 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [163]: Looking for old configuration files to upgrade.
2023-01-06 17:40:06,012 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [177]: Checking and performing updates took 0.03706026077270508
2023-01-06 17:40:06,038 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [266]: Completed loading preferences.
2023-01-06 17:40:06,044 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [304]: Created system tray icon.
2023-01-06 17:40:07,481 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [548]: Loading metadata into container registry took 1.4179577827453613 seconds
2023-01-06 17:40:07,514 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [142]: Selected build plate: 0
2023-01-06 17:40:07,514 - DEBUG - [MainThread] cura.CuraApplication.run [827]: Using Conan managed dependencies: cura/5.2.1, pyarcus/5.2.0, standardprojectsettings/0.1.0@ultimaker/stable, sipbuildtool/0.2.2@ultimaker/stable#a636cf06c54e438248f657020656457d, protobuf/3.21.4, zlib/1.2.12#3b9e037ae1c615d045a06c67d88491ae, arcus/5.2.0, cpython/3.10.4#b32bdcfcf86f4dca328f12e1faf40db7, openssl/1.1.1l#de73a8aad9d5a14da8ed43b40592195a, expat/2.4.1#a36c94ae11100f2e3259a9edd4f77055, libffi/3.2.1#33b3eff20f1be5d569235ae100266729, mpdecimal/2.5.0#d8aaabf46cfa93efaadfe66733885102, bzip2/1.0.8#b056f852bd2d5af96fc7171aadfd6c0b, sqlite3/3.36.0#d42a67cd9049135c9d299f26809c4be1, tk/8.6.10#52dd820e70534d4342fe6caec84beaff, tcl/8.6.10#aec77174134a121aaa59321674d1e893, xz_utils/5.2.5#dd8565c00d13a3a6fb2f01214f73a076, curaengine/5.2.1, clipper/6.4.2#4a99df8ff37476a0108cabee338a3cf2, boost/1.79.0, rapidjson/1.1.0#219bf1ea2756b263575da26288753262, stb/20200203#cba8fa43f7a0ea5389896744664823c9, spdlog/1.10.0, fmt/9.0.0, range-v3/0.12.0, pysavitar/5.2.0, savitar/5.2.0, pugixml/1.12.1#5a39f82651eba3e7d6197903a3202e21, pynest2d/5.2.0, nest2d/5.2.0, nlopt/2.7.0#d928ab39fe3f6d91120c738b0de4751c, uranium/5.2.0, fdm_materials/5.2.0, cura_binary_data/5.2.1
2023-01-06 17:40:07,514 - INFO - [MainThread] cura.CuraApplication.run [832]: Initializing machine error checker
2023-01-06 17:40:07,748 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [74]: Default machine actions added for machine definition [creality_ender3s1]
2023-01-06 17:40:07,997 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [190]: Extruder[creality_base_extruder_0 #2] added to [Creality Ender-3 S1] at position [0]
2023-01-06 17:40:08,048 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [79]: No machine with name Creality Ender-3 S1 in list of firmware to check.
2023-01-06 17:40:08,463 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [120]: Adding container tree for creality_ender3s1 took 0.39825439453125 seconds.
2023-01-06 17:40:08,463 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: ChangeAtZ
2023-01-06 17:40:08,463 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: ColorMix
2023-01-06 17:40:08,479 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: CreateThumbnail
2023-01-06 17:40:08,480 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2023-01-06 17:40:08,480 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: DisplayProgressOnLCD
2023-01-06 17:40:08,480 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: FilamentChange
2023-01-06 17:40:08,480 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: InsertAtLayerChange
2023-01-06 17:40:08,480 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: PauseAtHeight
2023-01-06 17:40:08,480 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: RetractContinue
2023-01-06 17:40:08,496 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: SearchAndReplace
2023-01-06 17:40:08,497 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: Stretch
2023-01-06 17:40:08,497 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: TimeLapse
2023-01-06 17:40:08,497 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: UsePreviousProbeMeasurements
2023-01-06 17:40:08,497 - WARNING - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadAllScripts [155]: Unable to create a folder for scripts: C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\scripts
2023-01-06 17:40:08,497 - WARNING - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadAllScripts [155]: Unable to create a folder for scripts: C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\scripts
2023-01-06 17:40:08,746 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [308]: The definition cache for definition fdmprinter failed to pickle.
2023-01-06 17:40:08,779 - INFO - [MainThread] cura.CuraApplication.run [837]: Initializing machine manager
2023-01-06 17:40:08,796 - INFO - [MainThread] cura.CuraApplication.run [842]: Initializing container manager
2023-01-06 17:40:08,813 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.loadAuthDataFromPreferences [258]: Attempting to load the auth data from preferences.
2023-01-06 17:40:08,813 - DEBUG - [MainThread] cura.OAuth2.AuthorizationHelpers.checkToken [115]: Checking the access token for [https://account.ultimaker.com/check-token]
2023-01-06 17:40:08,813 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [235]: Could not find output device with id digital_factory to remove
2023-01-06 17:40:08,863 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2023-01-06 17:40:08,884 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [164]: New error check scheduled.
2023-01-06 17:40:08,917 - DEBUG - [MainThread] cura.API.Account._sync [236]: Starting a new sync while previous sync was not completed
2023-01-06 17:40:08,917 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.callback [271]: Auth data was successfully loaded
2023-01-06 17:40:09,047 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-01-06 17:40:09,232 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [221]: Error check finished, result = False, time = 0.35s
2023-01-06 17:40:09,250 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [188]: Loading theme file: C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\themes\cura-light\theme.json
2023-01-06 17:40:09,318 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [323]: Loaded theme C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\themes\cura-light
2023-01-06 17:40:09,321 - INFO - [MainThread] UM.Qt.Bindings.Theme.load [324]: System's em size is 13px.
2023-01-06 17:40:09,729 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [344]: Creating post processing plugin view.
2023-01-06 17:40:09,798 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [354]: Post processing view created.
2023-01-06 17:40:09,979 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/Settings/SettingView.qml:40:9: QML TextField: Binding loop detected for property "implicitHeight"
2023-01-06 17:40:09,979 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/Settings/SettingView.qml:40:9: QML TextField: Binding loop detected for property "implicitHeight"
2023-01-06 17:40:10,029 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/PyQt6/Qt6/qml/UM/MenuItem.qml:19:5: QML Shortcut: Shortcut: Only binding to one of multiple key bindings associated with 66. Use 'sequences: [ <key> ]' to bind to all of them.
2023-01-06 17:40:10,029 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/PyQt6/Qt6/qml/UM/MenuItem.qml:19:5: QML Shortcut: Shortcut: Only binding to one of multiple key bindings associated with 12. Use 'sequences: [ <key> ]' to bind to all of them.
2023-01-06 17:40:10,029 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/PyQt6/Qt6/qml/UM/MenuItem.qml:19:5: QML Shortcut: Shortcut: Only binding to one of multiple key bindings associated with 11. Use 'sequences: [ <key> ]' to bind to all of them.
2023-01-06 17:40:10,246 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2023-01-06 17:40:10,530 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/Menus/SettingsMenu.qml:22:9: QML Menu: Binding loop detected for property "width"
2023-01-06 17:40:10,530 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/Menus/SettingsMenu.qml:22:9: QML Menu: Binding loop detected for property "width"
2023-01-06 17:40:10,614 - DEBUG - [MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [586]: Calculating normals took 0.016880512237548828 seconds
2023-01-06 17:40:10,614 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PrepareStage
2023-01-06 17:40:10,679 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2023-01-06 17:40:10,947 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SolidView
2023-01-06 17:40:10,976 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [118]: Creating model checker view.
2023-01-06 17:40:10,983 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [127]: Model checker view created.
2023-01-06 17:40:10,984 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [76]: Creating dialog [MoreInfoWindow.qml]
2023-01-06 17:40:11,018 - DEBUG - [MainThread] cura.CuraApplication.run [883]: Booting Cura took 7.628930568695068 seconds
2023-01-06 17:40:11,018 - DEBUG - [JobQueueWorker [0]] cura.Machines.ContainerTree.run [174]: Started background loading of MachineNodes
2023-01-06 17:40:11,035 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 17:40:11,058 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel.
2023-01-06 17:40:11,066 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 17:40:11,068 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 17:40:11,072 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 17:40:11,141 - DEBUG - [MainThread] Marketplace.CloudSync.CloudPackageChecker._handleCompatibilityData [129]: Discrepancy found between Cloud subscribed packages and Cura installed packages
2023-01-06 17:40:11,186 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel.
2023-01-06 17:40:11,543 - DEBUG - [JobQueueWorker [0]] cura.Machines.ContainerTree.run [185]: All MachineNode loading completed
2023-01-06 17:40:11,732 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [211]: Support for Vertex Array Objects: True
2023-01-06 17:40:11,737 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [121]: Initialized OpenGL subsystems.
2023-01-06 17:40:11,738 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [122]: OpenGL Version:  4.1.0 - Build 30.0.100.9955
2023-01-06 17:40:11,738 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [123]: OpenGL Vendor:   Intel
2023-01-06 17:40:11,739 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [124]: OpenGL Renderer: Intel(R) Iris(R) Plus Graphics
2023-01-06 17:40:11,739 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [125]: GLSL Version:    4.10.0
2023-01-06 17:40:11,740 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\default.shader]...
2023-01-06 17:40:11,758 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\selection.shader]...
2023-01-06 17:40:11,775 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\select_face.shader]...
2023-01-06 17:40:11,791 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\default.shader]...
2023-01-06 17:40:11,809 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\composite.shader]...
2023-01-06 17:40:11,835 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\overhang.shader]...
2023-01-06 17:40:11,865 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\striped.shader]...
2023-01-06 17:40:11,891 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\transparent_object.shader]...
2023-01-06 17:40:11,911 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\striped.shader]...
2023-01-06 17:40:11,936 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\xray.shader]...
2023-01-06 17:40:11,950 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\xray_composite.shader]...
2023-01-06 17:40:11,977 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\default.shader]...
2023-01-06 17:40:11,993 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\grid.shader]...
2023-01-06 17:40:12,013 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\platform.shader]...
2023-01-06 17:40:12,046 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\xray.shader]...
2023-01-06 17:40:16,960 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/MainWindow/ApplicationMenu.qml:51:9: QML FileMenu: Binding loop detected for property "width"
2023-01-06 17:40:19,251 - INFO - [MainThread] cura.CuraApplication.readLocalFile [1774]: Attempting to read file file:///Z:/Tobias/Icons/svg/RemoteErgo_5Way v10.stl
2023-01-06 17:40:19,300 - DEBUG - [JobQueueWorker [1]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0 seconds
2023-01-06 17:40:19,300 - DEBUG - [JobQueueWorker [1]] STLReader.STLReader._read [68]: Loaded a mesh with 153774 vertices
2023-01-06 17:40:19,403 - DEBUG - [JobQueueWorker [1]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.1004478931427002 seconds. 1959 input vertices. 1959 output vertices.
2023-01-06 17:40:19,504 - DEBUG - [JobQueueWorker [1]] UM.FileHandler.ReadFileJob.run [83]: Loading file took 0.2 seconds
2023-01-06 17:40:19,612 - DEBUG - [JobQueueWorker [1]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.10654473304748535 seconds. 1958 input vertices. 1958 output vertices.
2023-01-06 17:40:19,621 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x000002B8D2C4FD30>, took 1ms
2023-01-06 17:40:19,643 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=2) RotateOp.(node=<CuraSceneNode object: 'RemoteErgo_5Way v10.stl'>,rot.=Q<0.0,0.0,0.0,w=4.0>) TranslateOp.(node=<CuraSceneNode object: 'RemoteErgo_5Way v10.stl'>,trans.=<0.000,0.000,0.000>), took 1ms
2023-01-06 17:40:19,901 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\transparent_object.shader]...
2023-01-06 17:40:22,470 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.024919986724853516 seconds
2023-01-06 17:40:22,518 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend._createSnapshot [275]: Creating thumbnail image (just before slice)...
2023-01-06 17:40:22,525 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2023-01-06 17:40:22,530 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\overhang.shader]...
2023-01-06 17:40:22,556 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\transparent_object.shader]...
2023-01-06 17:40:22,575 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\striped.shader]...
2023-01-06 17:40:23,337 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [290]: Starting to slice...
2023-01-06 17:40:23,338 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [309]: Going to slice build plate [0]!
2023-01-06 17:40:23,596 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [516]: Sending slice message took 0.2587146759033203 seconds
2023-01-06 17:40:23,847 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:23.860] [warning] Mesh has overlapping faces!
2023-01-06 17:40:23,862 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:23.862] [info] Progress: start accomplished in   0s
2023-01-06 17:40:23,863 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:23.862] [info] Starting slice...
2023-01-06 17:40:23,864 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:23.862] [info] Slicing model...
2023-01-06 17:40:23,872 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:23.872] [info] Slice of mesh took 0.01600000006146729 seconds
2023-01-06 17:40:23,882 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:23.882] [info] Make polygons took 0.01500000013038516 seconds
2023-01-06 17:40:23,882 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:23.883] [info] Progress: slice accomplished in 0.03100000019185245s
2023-01-06 17:40:23,882 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:23.883] [info] Starting layerparts...
2023-01-06 17:40:23,897 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:23.898] [info] Progress: layerparts accomplished in 0.015999999828636646s
2023-01-06 17:40:23,897 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:23.898] [info] Starting inset+skin...
2023-01-06 17:40:25,396 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:25.403] [info] Layer count: 118
2023-01-06 17:40:25,396 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:25.403] [info] Progress: inset+skin accomplished in 1.5s
2023-01-06 17:40:25,396 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:25.403] [info] Starting support...
2023-01-06 17:40:25,930 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:25.941] [info] Progress: support accomplished in 0.5309999999590218s
2023-01-06 17:40:25,942 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:25.941] [info] Starting export...
2023-01-06 17:40:27,096 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:27.104] [info] Progress: export accomplished in 1.1560000001918525s
2023-01-06 17:40:27,112 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:27.114] [info] Sending 118 layers.
2023-01-06 17:40:27,112 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:27.115] [info] Total time elapsed 3.25s.
2023-01-06 17:40:27,112 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] 
2023-01-06 17:40:27,112 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:27.115] [info] Print time (s): 20519
2023-01-06 17:40:27,112 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:27.115] [info] Print time (hr|min|s): 5h 41m 59s
2023-01-06 17:40:27,112 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:27.115] [info] Filament (mm^3): 29982
2023-01-06 17:40:27,380 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] [2023-01-06 17:40:27.380] [info] Closing connection.
2023-01-06 17:40:27,553 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] 
2023-01-06 17:40:27,554 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] Cura_SteamEngine version 5.2.1
2023-01-06 17:40:27,555 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] Copyright (C) 2022 Ultimaker
2023-01-06 17:40:27,555 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] 
2023-01-06 17:40:27,556 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] This program is free software: you can redistribute it and/or modify
2023-01-06 17:40:27,557 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] it under the terms of the GNU Affero General Public License as published by
2023-01-06 17:40:27,558 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] the Free Software Foundation, either version 3 of the License, or
2023-01-06 17:40:27,559 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] (at your option) any later version.
2023-01-06 17:40:27,559 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] 
2023-01-06 17:40:27,560 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] This program is distributed in the hope that it will be useful,
2023-01-06 17:40:27,561 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2023-01-06 17:40:27,561 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2023-01-06 17:40:27,562 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] GNU Affero General Public License for more details.
2023-01-06 17:40:27,562 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] 
2023-01-06 17:40:27,562 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] You should have received a copy of the GNU Affero General Public License
2023-01-06 17:40:27,562 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [115]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2023-01-06 17:40:27,600 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [770]: Slicing took 4.261082887649536 seconds
2023-01-06 17:40:27,600 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [771]: Number of models per buildplate: {0: 1}
2023-01-06 17:40:27,601 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [785]: See if there is more to slice...
2023-01-06 17:40:27,602 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [200]: Socket state changed to Closing
2023-01-06 17:40:27,603 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [224]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2023-01-06 17:40:27,603 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [202]: Socket state changed to Closed
2023-01-06 17:40:27,629 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [969]: Backend finished slicing. Resetting process and socket.
2023-01-06 17:40:28,496 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PreviewStage
2023-01-06 17:40:28,512 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SimulationView
2023-01-06 17:40:28,514 - DEBUG - [MainThread] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0009999275207519531 seconds
2023-01-06 17:40:28,515 - DEBUG - [MainThread] STLReader.STLReader._read [68]: Loaded a mesh with 12612 vertices
2023-01-06 17:40:28,516 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\plugins\SimulationView\simulationview_composite.shader]...
2023-01-06 17:40:28,563 - DEBUG - [JobQueueWorker [3]] CuraEngineBackend.ProcessSlicedLayersJob.run [74]: Processing new layer for build plate 0...
2023-01-06 17:40:28,796 - DEBUG - [JobQueueWorker [3]] CuraEngineBackend.ProcessSlicedLayersJob.run [254]: Processing layers took 0.232574462890625 seconds
2023-01-06 17:40:28,831 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\color.shader]...
2023-01-06 17:40:28,846 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\plugins\SimulationView\layers3d.shader]...
2023-01-06 17:40:28,945 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\plugins\SimulationView\layers3d_shadow.shader]...
2023-01-06 17:40:29,012 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\toolhandle.shader]...
2023-01-06 17:40:29,029 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\color.shader]...
2023-01-06 17:40:29,047 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\cura\resources\shaders\striped.shader]...
2023-01-06 17:40:29,201 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onProcessLayersFinished [1006]: See if there is more to slice(2)...
2023-01-06 17:40:33,396 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\toolhandle.shader]...
2023-01-06 17:40:34,966 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.2.1\share\uranium\resources\shaders\toolhandle.shader]...
2023-01-06 17:40:42,188 - DEBUG - [MainThread] cura.TaskManagement.OnExitCallbackManager.triggerNextCallback [56]: No more on-app-exit callbacks to process. Tell the app to exit.
2023-01-06 17:40:42,188 - INFO - [MainThread] cura.CuraApplication.closeApplication [626]: Close application
2023-01-06 17:40:42,188 - INFO - [MainThread] cura.CuraApplication._setLoadingHint [819]: Initializing Active Machine...
2023-01-06 17:40:42,198 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 17:40:42,198 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [96]: No active GlobalStack, set quality profile model as empty.
2023-01-06 17:40:42,199 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 17:40:42,199 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [96]: No active GlobalStack, set quality profile model as empty.
2023-01-06 17:40:42,200 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:67: TypeError: Cannot read property 'name' of null
2023-01-06 17:40:42,204 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2023-01-06 17:40:42,218 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 17:40:42,219 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [96]: No active GlobalStack, set quality profile model as empty.
2023-01-06 17:40:42,219 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [91]: Updating IntentSelectionModel.
2023-01-06 17:40:42,219 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [96]: No active GlobalStack, set quality profile model as empty.
2023-01-06 17:40:42,220 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:67: TypeError: Cannot read property 'name' of null
2023-01-06 17:40:42,221 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2023-01-06 17:40:42,285 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///C:/Program Files/Ultimaker Cura 5.2.1/share/cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:237:25: Unable to assign QString to QRegularExpression
2023-01-06 17:40:42,313 - DEBUG - [MainThread] UM.Qt.QtApplication.windowClosed [508]: Shutting down cura
2023-01-06 17:40:42,351 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [360]: Attempting to kill the engine process

from cura-measuretool.

TobiasPSP commented on July 4, 2024

I am sorry for any confusion then. Maybe this should be mentioned in the description here at github then? I honestly did not know that.

from cura-measuretool.

fieldOfView commented on July 4, 2024

No problem. Often the biggest part of fixing an issue is finding out what the issue actually is.

The measure tool icon in the toolbar should disable itself when you switch to the Preview tab (or "stage" as it is called internally). Does it do that for you? If it did, that should make it a bit more obvious that measuring does not work in the Preview tab.

from cura-measuretool.

TobiasPSP commented on July 4, 2024

That’s what confused me: the tool is available, and it shows the „black dot“ in the model.
Thank you for this great tool! Often documentation is the key however writing docs is no fun :-)

from cura-measuretool.

Not working in Cura 5.1 about cura-measuretool HOT 22 CLOSED

Comments (22)

Related Issues (20)

Recommend Projects

React

Vue.js

Typescript

TensorFlow

Django

Laravel

D3

Recommend Topics

javascript

web

server

Machine learning

Visualization

Game

Recommend Org

Facebook

Microsoft

Google

Alibaba

D3

Tencent