CSI driver for provisioning Local PVs backed by ZFS and more.
This project is under active development and considered to be in Alpha state. The current implementation only supports provisioning and de-provisioning of ZFS Volumes.
Before installing ZFS driver please make sure your Kubernetes Cluster must meet the following prerequisites:
- all the nodes must have zfs utils installed
- ZPOOL has been setup for provisioning the volume
- You have access to install RBAC components into kube-system namespace. The OpenEBS ZFS driver components are installed in kube-system namespace to allow them to be flagged as system critical components.
All the node should have zfsutils-linux installed. We should go to the each node of the cluster and install zfs utils
$ apt-get install zfsutils-linux
OpenEBS ZFS driver components can be installed by running the following command.
kubectl apply -f https://raw.githubusercontent.com/openebs/zfs-localpv/master/deploy/zfs-operator.yaml
Verify that the ZFS driver Components are installed and running using below command :
$ kubectl get pods -n kube-system -l role=openebs-zfs
Depending on number of nodes, you will see one zfs-controller pod and zfs-node daemonset running on the nodes.
NAME READY STATUS RESTARTS AGE
openebs-zfs-controller-0 4/4 Running 0 5h28m
openebs-zfs-node-4d94n 2/2 Running 0 5h28m
openebs-zfs-node-gssh8 2/2 Running 0 5h28m
openebs-zfs-node-twmx8 2/2 Running 0 5h28m
Once ZFS driver is installed we can provision a volume.
- create a Storage class
apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:
name: openebs-zfspv
parameters:
blocksize: "4k"
compression: "off"
dedup: "off"
thinprovision: "no"
poolname: "zfspv-pool"
provisioner: openebs.io/zfs
The storage class contains the volume paramaters like blocksize, compression, dedup and thinprovision. You can select what are all parameters you want. The above yaml shows the default values in case paramenters are not provided or wrong value has been provided. The poolname is the must argument. There must be a ZPOOL running on the node with the name given in this storage class.
Here we have to give the provisioner as "openebs.io/zfs" which is the provisioner name of the ZFS driver.
- create a PVC
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: csi-zfspv
spec:
storageClassName: openebs-zfspv
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
Create a PVC using the storage class created with the openebs.io/zfs provisioner.
- Deploy the application using this PVC
apiVersion: v1
kind: Pod
metadata:
name: fio
spec:
affinity:
nodeAffinity:
requiredDuringSchedulingIgnoredDuringExecution:
nodeSelectorTerms:
- matchExpressions:
- key: kubernetes.io/hostname
operator: In
values:
- gke-user-zfspv-default-pool-fb71317f-rgcm
restartPolicy: Never
containers:
- name: perfrunner
image: openebs/tests-fio
command: ["/bin/bash"]
args: ["-c", "while true ;do sleep 50; done"]
volumeMounts:
- mountPath: /datadir
name: fio-vol
tty: true
volumes:
- name: fio-vol
persistentVolumeClaim:
claimName: csi-zfspv
Here in alpha version of the ZFS driver we have to make use of node selector or node affinity to make the application pod stick to the node as the application pod should not move to the other node because the data will be there on one node only.
After the deployment of the application we can go to the node and see that a zfs volume has been created in the pool mentioned in the storage class and application is using that volume for writting the data. This is in effect working like waitforFirstConsumer so the actual ZFS volume will be create when application is deployed to the node.
$ zfs list
NAME USED AVAIL REFER MOUNTPOINT
zfspv-pool 4.25G 92.1G 96K /zfspv-pool
zfspv-pool/pvc-f52058b7-da1c-11e9-80e0-42010a800fcd 4.25G 96.4G 5.69M -
- for deprovisioning the volume we can delete the application which is using the volume and then we can go ahead and delete the pv, as part of deletion of pv this volume will also be deleted from the ZFS pool and data will be free.