Arch/Bim Wall, Colinear wall segment / sketch edge with opposite direction / Left-Right Align resulted in wall segment corner touching corner - this is not acceptable in the OCC engine.

[BanceFC]

Arch/Bim Wall, Colinear wall segment / sketch edge with opposite direction / Left-Right Align resulted in wall segment corner touching corner - this is not acceptable in the OCC engine.

[paullee0]

This happens in cornercase when there are 2 consecutive wall segment (i.e. 2 consecutive sketch's edges) are colinear, but either have opposite Align (Left/Right) or Sketch Edge direction are opposite but their Align are not Center, this results in 2 consecutive Wall segment volume just touching themselves at a corner. This is not acceptable to OCC and results in errror.

Needs to see if there is algorithm to reveal this cornercase, either make a warning, or prevent this happens, or otherwise.