Wrong ID read from softrf Fanet

[gereic]

Wrong ID read from softrf Fanet

[danielvelezbravo]

You have a really old version of GXairCom. Try to upgrade to version +4 El lun., 22 de febrero de 2021 17:32, Tenz <[email protected]> escribió:

…

Don't know if it is a real issue or maybe a problem of softrf mark ii firmware but I get the wrong ID from all my devices set to fanet while receiving with GXAir. Eg. device real ID 0D3724 read as 073724 [image: 20210221_234503] <https://user-images.githubusercontent.com/12269827/108783720-3f131680-756e-11eb-9d22-f194bf7e6a90.jpg> [image: Inked20210221_234522_LI] <https://user-images.githubusercontent.com/12269827/108783817-6bc72e00-756e-11eb-948c-b9bd05494c92.jpg> — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#32>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AQGJZSTXJ3Z3EP7CPWAXCB3TALSPXANCNFSM4YBOACOQ> .

[Martenz]

You have a really old version of GXairCom. Try to upgrade to version +4 El lun., 22 de febrero de 2021 17:32, Tenz [email protected] escribió:
…
Don't know if it is a real issue or maybe a problem of softrf mark ii firmware but I get the wrong ID from all my devices set to fanet while receiving with GXAir. Eg. device real ID 0D3724 read as 073724 [image: 20210221_234503] https://user-images.githubusercontent.com/12269827/108783720-3f131680-756e-11eb-9d22-f194bf7e6a90.jpg [image: Inked20210221_234522_LI] https://user-images.githubusercontent.com/12269827/108783817-6bc72e00-756e-11eb-948c-b9bd05494c92.jpg — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#32>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQGJZSTXJ3Z3EP7CPWAXCB3TALSPXANCNFSM4YBOACOQ .

Yep sorry that was old test, now I updated but I'm having the same problem with v.4.5.1 installed.

same ID one side: 3C003C and GxAirCom get 07003C ...

thanks

[nepat]

That is actually all OK and fully intended. Older versions of GXAircom used a FANET Id with 07... Since a while GXAircom has its own FANET manufacturer ID and now it begins with 08....

[Martenz]

That is actually all OK and fully intended. Older versions of GXAircom used a FANET Id with 07... Since a while GXAircom has its own FANET manufacturer ID and now it begins with 08....

But my other two devices are softrf not gxaircom.. seems the first 3 values are not decoded properly.. maybe I’m missing some concepts.. thanks