Comments (6)
Submiting data asap
from nagios-plugin-check_raid.
| ARCCONF | IBM uniform command line interface
| ARCCONF | Version 9.10 (B17444)
| ARCCONF | (C) Adaptec 2003-2007
| ARCCONF | All Rights Reserved
COPYBACK | toggles controller copy back mode
CREATE | creates a logical drive
DATASCRUB | toggles the controller data scrubbing mode
DELETE | deletes one or more logical drives
FAILOVER | toggles the controller autotomatic failover mode
FLASHCOPY | creates a copy of a logical drive
GETCONFIG | prints controller information
GETLOGS | gets controller log information
GETSTATUS | displays the status of running tasks
GETVERSION | prints version information for all controllers
IDENTIFY | blinks LEDS on device(s) connected to a controller
MODIFY | performs RAID Level Migration or Online Capacity Expansion
RESCAN | checks for new or removed drives
ROMUPDATE | updates controller firmware
SETCONFIG | restores the default configuration
SETCACHE | adjusts physical or logical drive cache mode
SETNAME | renames a logical drive given its logical drive number
SETPRIORITY | changes specific or global task priority
SETSTATE | manually sets the state of a physical or logical drive
TASK | performs a task such as synchronize on a physical or logical drive
from nagios-plugin-check_raid.
Controllers found: 1
Current operation : None
Command completed successfully.
from nagios-plugin-check_raid.
Controllers found: 1
----------------------------------------------------------------------
Controller information
----------------------------------------------------------------------
Controller Status : Okay
Channel description : SAS/SATA
Controller Model : IBM ServeRAID 8k-l
Controller Serial Number : 4061EDA
Physical Slot : 0
Installed memory : 32 MB
Copyback : Disabled
Data scrubbing : Enabled
Automatic Failover : Enabled
Defunct disk drive count : 1
Logical drives/Offline/Critical : 1/1/0
--------------------------------------------------------
Controller Version Information
--------------------------------------------------------
BIOS : 5.2-0 (17003)
Firmware : 5.2-0 (17003)
Driver : 1.1-5 (2456)
Boot Flash : 5.1-0 (15411)
--------------------------------------------------------
Controller Battery Information
--------------------------------------------------------
Status : Not Installed
--------------------------------------------------------
Controller Vital Product Data
--------------------------------------------------------
VPD Assigned# : 25R8078
EC Version# : J85097A
Controller FRU# : 25R8079
----------------------------------------------------------------------
Logical drive information
----------------------------------------------------------------------
Logical drive number 0
Logical drive name : ARRAY01
RAID level : Spanned_volume
Status of logical drive : Offline
Size : 5722200 MB
Write-cache mode : Not supported
Partitioned : Yes
Protected by Hot-Spare : No
Bootable : Yes
Defunct stripes : No
--------------------------------------------------------
Logical drive segment information
--------------------------------------------------------
Segment 0 : Present (0,0) 9QJ40LQ5
Segment 1 : Present (0,1) 9QJ3ZX84
Segment 2 : Present (0,2) 9QJ3Y860
Segment 3 : Present (0,3) 9QJ3ZX0D
Segment 4 : Present (0,4) 9QJ3ZXZ4
Segment 5 : Inconsistent (0,5)
----------------------------------------------------------------------
Physical Device information
----------------------------------------------------------------------
Device #0
Device is a Hard drive
State : Online
Supported : Yes
Transfer Speed : SATA 1.5 Gb/s
Reported Channel,Device : 0,0
Reported Location : Enclosure 0, Slot 0
Reported ESD : 2,0
Vendor : ST310003
Model : 40NS
Firmware : BB12
Serial number : 9QJ40LQ5
Size : 953869 MB
Write Cache : Enabled (write-back)
FRU : None
PFA : No
Device #1
Device is a Hard drive
State : Online
Supported : Yes
Transfer Speed : SATA 1.5 Gb/s
Reported Channel,Device : 0,1
Reported Location : Enclosure 0, Slot 1
Reported ESD : 2,0
Vendor : ST310003
Model : 40NS
Firmware : BB12
Serial number : 9QJ3ZX84
Size : 953869 MB
Write Cache : Enabled (write-back)
FRU : None
PFA : No
Device #2
Device is a Hard drive
State : Online
Supported : Yes
Transfer Speed : SATA 1.5 Gb/s
Reported Channel,Device : 0,2
Reported Location : Enclosure 0, Slot 2
Reported ESD : 2,0
Vendor : ST310003
Model : 40NS
Firmware : BB12
Serial number : 9QJ3Y860
Size : 953869 MB
Write Cache : Enabled (write-back)
FRU : None
PFA : No
Device #3
Device is a Hard drive
State : Online
Supported : Yes
Transfer Speed : SATA 1.5 Gb/s
Reported Channel,Device : 0,3
Reported Location : Enclosure 0, Slot 3
Reported ESD : 2,0
Vendor : ST310003
Model : 40NS
Firmware : BB12
Serial number : 9QJ3ZX0D
Size : 953869 MB
Write Cache : Enabled (write-back)
FRU : None
PFA : No
Device #4
Device is a Hard drive
State : Online
Supported : Yes
Transfer Speed : SATA 1.5 Gb/s
Reported Channel,Device : 0,4
Reported Location : Enclosure 0, Slot 4
Reported ESD : 2,0
Vendor : ST310003
Model : 40NS
Firmware : BB12
Serial number : 9QJ3ZXZ4
Size : 953869 MB
Write Cache : Enabled (write-back)
FRU : None
PFA : No
Device #5
Device is a Hard drive
State : Defunct
Supported : Yes
Transfer Speed : Defunct
Reported Channel,Device : 0,5
Reported Location : Enclosure 0, Slot 5
Reported ESD : 2,0
Vendor : ST310003
Model : 40NS
Firmware : BB12
Size : 0 MB
Write Cache : Unknown
FRU : None
PFA : Yes
Device #6
Device is an Enclosure services device
Reported Channel,Device : 2,0
Enclosure ID : 0
Type : SES2
Vendor : IBM-ESXS
Model : VSC7160
Firmware : 1.07
Status of Enclosure services device
Temperature : Normal
Command completed successfully.
from nagios-plugin-check_raid.
arcconf GETLOGS 1 DEAD tabular
Controllers found: 1
ControllerLog
controllerID ..................... 0
type ............................. 5
time ............................. 1416322004
version .......................... 0
deadDriveEntry
adapterID ........................ 0
channelID ........................ 0
deviceID ......................... 5
entryType ........................ 0
rtcSeconds ....................... 10
rtcMinutes ....................... 3
rtcHours ......................... 0
rtcDay ........................... 28
rtcMonth ......................... 10
rtcYear .......................... 2014
serialNumber ..................... 9QJ407LY
vendorProductID .................. 9QJ407LYST310003
failureReasonCode ................ 33554432
majorReasonCode .................. 2
deviceAddress .................... 0
slotNum .......................... 5
enclIndex ........................ 0
deadDriveEntry
adapterID ........................ 0
channelID ........................ 0
deviceID ......................... 5
entryType ........................ 0
rtcSeconds ....................... 41
rtcMinutes ....................... 10
rtcHours ......................... 0
rtcDay ........................... 28
rtcMonth ......................... 10
rtcYear .......................... 2014
serialNumber ..................... 9TE1NXXN
vendorProductID .................. 9TE1NXXNST310003
failureReasonCode ................ 0
majorReasonCode .................. 0
deviceAddress .................... 0
slotNum .......................... 5
enclIndex ........................ 0
Command completed successfully.
from nagios-plugin-check_raid.
can you update what is each command being executed?
from nagios-plugin-check_raid.
Related Issues (20)
- arcconf: bbu monitoring for flash+battery/supercap adaptec modules HOT 1
- arcconf: doesn't handle logical device status: Impacted (Build/Verify with fix : 90 %) HOT 2
- Allow to ignore plugins
- No remote servers RAID status: check_raid UNKNOWN HOT 16
- Possible to hide "OK" results or just showing "OK" and not all devices? HOT 4
- Error runing plug-in on debian 10 HOT 10
- remote monitor HOT 1
- Use of StorCli instead of MegaCli HOT 5
- [bug] with parsing mdadm output => Unexpected parse
- Sudo error on centos
- WARNING: megacli:[Volumes(1): DISK0.0:Optimal, WriteCache:DISABLED HOT 2
- arcconf: parse error HOT 6
- Unexpected parse at ./check_raid.pl line 3578, <$fh> line 6. HOT 1
- HP ssacli - consider predictive failure information HOT 6
- HP ssacli - rebuilding shouldn't perhaps still be warning state? HOT 6
- HP ssacli -
- Error with P440AR RAID controller. How to solve, what to change? Please advice. HOT 6
- "NOT PARSED" and "Can't locate object method" errors HOT 2
- Feature Request mdstat: Warn when auto-read-only array detected
- "sudo: a password is required" on Ubuntu 20.0.4 HOT 4
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from nagios-plugin-check_raid.