No byte swap for FLIR png with new "Import with defaults"

[gtatters]

No byte swap for FLIR png with new "Import with defaults"

[gtatters]

Hi Klaus
Sorry I'm in the field and travelling away from computer a lot so will see about adding this in a future update. I'm glad you figured out a work-around - it suggests my code is somewhat decipherable.

Reasons why I have been hesitant to do this particular decision when importing is because I am not convinced that FLIR is ever consistent in the byte ordering between cameras or software. Thus, if I assume the PNG style data need to have the byte order swapped, I suspect we'll find a different image from a different flir camera that doesn't need it! So I might add your suggestion but need to keep an eye out in case it breaks import for some other files.

Best
Glenn

[gtatters]

ok, I've added your code to v2.7.

Tested with a number of images I have and it seems to work.

Thanks for the suggestion!

[KlMichel]

Hi Glenn, I am glad it works! We take our images with one camera in a controlled environment and the parameters will not change between sessions but I will keep an eye on it (especially if there are any firmware updates). All the best, Klaus Von: Glenn Tattersall ***@***.***> Gesendet: Freitag, 15. Juli 2022 03:40 An: gtatters/ThermImageJ ***@***.***> Cc: Klaus Michel ***@***.***>; Author ***@***.***> Betreff: Re: [gtatters/ThermImageJ] No byte swap for FLIR png with new "Import with defaults" (Issue #8) ok, I've added your code to v2.7. Tested with a number of images I have and it seems to work. Thanks for the suggestion! — Reply to this email directly, view it on GitHub<#8 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/A2BV6XTNMDFJNB63N2UZIWDVUC6ODANCNFSM53RXVVIQ>. You are receiving this because you authored the thread.Message ID: ***@***.******@***.***>>