JUN-2019 Mikrotik RB450G image unbootable / missing mini builds(?) / no 5G wifi

[gwlim]

JUN-2019 Mikrotik RB450G image unbootable / missing mini builds(?) / no 5G wifi

[gwlim]

1. Yes that was clocked to 800MHZ, since no one commented that the OC image was not working I thought it was. So do you know what is the max stable overclock of AR7161? 750MHZ?
   It is a old device so it should be OCed to maximise the performance. I can rebuild this weekend

2. I am quite confident WDR3600 is working because I tested it on my WDR4300 and 5GHZ works.
   If you click on scan and you see 5GHZ Access Points means Wireless is working but there is something wrong with your /etc/config/wireless

3. Check the tar.gz in the folder all kmod-wireguard should be inside

[eisengrau]

Hello,

Indeed, you can scratch out the WiFi issue with wdr3600, it was my fault, I accidentally disabled the ucitrack service and for that reason it did not apply my configuration for the 5GHz radio. sorry for that, working fine now!

Basically I haven't tried overclocking the rb450g yet, in the menu there is only a possibility to over/under clock it to predefined freqs. For example the next and last step is to go to 800Mhz from the stock 680Mhz. That's it, there is no possiblility to go 750. I'll try this next time when I'll remove it from the cabinet.

Oh, I see. Is it safe to flash this:

https://github.com/gwlim/openwrt-sfe-flowoffload/tree/master/JUN-2019/openwrt-sfe-flowoffload-normal/TP-Link%20WR1043NDv1-64MB-RAM-mips24k-ath9k

on the 32MB umodded variant too? Then I can grab and install whichever kmod ipk I need from the archive.

Thank you,

[gwlim]

Nope sorry realised I missed the mini builds will do it soon
I think I will redo everything this weekend.
A few issues:
-The ath10k-ct firmware that is in Openwrt doesn't work well with Intel Wireless AC9260 works well with AC7265 though
-Missed the mini-builds
-Overclock for AR7161 not working
What is new and working
-Full wpad hostapd with Mesh Wireless confirm working
-Managed to reduce the size of certain binaries by stripping debug info
-Remove some kmods from the default image and build kmods instead

[eisengrau]

Awesome! Thank you! Waiting to update all my devices throughout the estate... :)

[eisengrau]

Hai, what happened here? I was just in the middle of downloading and flashing the mini build for the 1043nd 32MB, but the next moment the image was gone from the folder. Have you updated something?

[gwlim]

yes I just completed it.
Each time it is build you need the corresponding kernel module due to SSP in openwrt

[eisengrau]

Yes! It's ok now, I was able to flash your latest image onto the "ultimate gigabit router" 1043nd 32mb beast! Now, I can be in the same "LAN" with my mate from the other butthole of Europe, thanks to the super-awesome wireguard (he is using the same 1043nd since years... and he was skeptical to reflash from stock tp-lin software, until now -yikes! -).

Thank you, again, gwlim, for your continous efforts. It's a breath of fresh air for these 'legacy' devices, and we definately need this kind of a "fresh air". :)

[gwlim]

No problem. Enjoy.