display does not use manual Node Topic

[stefan242]

display does not use manual Node Topic

[smcgann99]

I wonder if this is related to #697 ?

[fvanroie]

You can download the latest firmware artifacts at the bottom of this build.

[stefan242]

I think so!

MQTT updates send to the plate3a display are working though.

This seems to be important, since one direction is working!

[stefan242]

And since I have another Openhasp based Lanbon L8 plate, which has another size and other display informations, I cannot not use hasp/plates/... either. (see the other issue #697 regarding group topics)

[stefan242]

Sorry for asking so dumb, but I cannot find a new (compiled) firmware to test the fix with my GS-T3E. :-(

[stefan242]

been there, done that, updated the firmware and voila, it works!
Hostname is "plate3a", Node Topic is "hasp/plate3/%topic%" and MQTT messages from the plate to Node-RED arrive as
{"topic":"hasp/plate3/state/p2b20","payload":{"event":"up","val":27},"qos":0,"retain":false,"_topic":"hasp/plate3/state/p2b20","_msgid":"a548aa74c391f9e3"}
(for example)
Thank you!