Comments (4)
It worked for me on a macbook. I see the fts3 package both in the diracgrid and conda-forge channels. But perhaps there is a restriction on the version of python? What version are you using? I installed with 3.8
% anaconda search fts3
Using Anaconda API: https://api.anaconda.org
Packages:
Name | Version | Package Types | Platforms | Builds
------------------------- | ------ | --------------- | --------------- | ----------
conda-forge/fts3 | 3.12.0 | conda | noarch | pyhd8ed1ab_0
: File Transfer Service REST API
diracgrid/fts3 | | conda | noarch | py_0
: FTS Python 3 CLI and libraries
Found 2 packages
from protopipe-grid-interface.
Hi @Iburelli,
I guess my last instruction didn't work...thanks for opening the issue.
To be clearer: you get this error just when doing e.g. conda env create -f environment_development.yml
, right?
Even before installing protopipe and the interface?
I could never reproduce this issue on my macos, and I also checked that it works on a Ubuntu 20.04.4 LTS
with conda 4.13.0
...
If you wish we can have a zoom meeting in the next days to check this face-to-face.
@kosack : Python 3.8 is the only supported version in both environments due to upgrade breaking changes with CTADIRAC when using more than that (but this was sometime ago)
from protopipe-grid-interface.
Hi!
@HealthyPear yes the probem shows up when trying conda env create -f environment_development.yml
, before installing protopipe.
We followed your instructions (thanks again) but we did not succeed. Meanwhile I had to change my pc an trying to install the environment on ubuntu 22 I get the same error. Just to make sure it was not just me I also tried on farm always obtaining the same result. Both systems are updated to miniconda 4.13.0
@kosack I tried to look for the package (on my laptop) but I get the following output:
Loading channels: done
No match found for: fts3. Search: fts3
PackagesNotFoundError: The following packages are not available from current channels:
- fts3
Current channels:
- https://repo.anaconda.com/pkgs/main/linux-64
- https://repo.anaconda.com/pkgs/main/noarch
- https://repo.anaconda.com/pkgs/r/linux-64
- https://repo.anaconda.com/pkgs/r/noarch
To search for alternate channels that may provide the conda package you're
looking for, navigate to
https://anaconda.org
and use the search bar at the top of the page.
This week I'm busy with a PhD school so I have only the evenings free, after 18.30. Would it be ok for you if we meet next week?
from protopipe-grid-interface.
Hi!
I managed to solve the problem in the following way:
I first downloaded diracos and source diracosrc:
- curl -LO https://github.com/DIRACGrid/DIRACOS2/releases/latest/download/DIRACOS-Linux-x86_64.sh
- bash DIRACOS-Linux-x86_64.sh
- source diracos/diracosrc
Inside protopipe-grid-interface/environment_development.yaml:
- diracgrid::fts3 line becomes fts3
At this point I create the environment
conda env create -f protopipe-grid-interface/environment_development.yaml
I then go back to my standard conda env
conda deactivate
source .bashrc
At this point I tried to install protopipe (pip install -e ‘.[all]’ but I was obtaining some errors.
Than I modified the file protopipe/environment_developement.yml
- name: protopipe-dev → name: protopipe-CTADIRAC-dev
-conda env update -f protopipe/environment_development.yml
I then activate my env and install protopipe and the interface (in both cases pip install -e ‘.[all]’
from the appropriate directory)
I have no idea why, but it works
from protopipe-grid-interface.
Related Issues (20)
- The whole interface is assuming Docker container HOT 2
- Improve downloading of files before merging
- test and dry modes do not behave as expected HOT 1
- Add and test the high-memory requirement method
- Add check for dimension of a merged file HOT 1
- A job can crash if its name is too long
- Create container Docker for python3-based installation
- Upload also grid configuration file at job submission
- Do not submit job during logging call
- Do not upload all protopipe folder at submission
- Analysis config doesn't get uploaded if only 1 job is launched
- Fix gfal2 to 2.20.2 HOT 1
- Migrate to cta-observatory organization
- Unit-testing for DIRAC-related operations
- Uniformise definition of SE lists throughout an analysis
- Make particle type and n_files_per_job command-line options in SUBMIT_JOBS
- Merge this repository as a protopipe module
- Unable to submit jobs from computing farm HOT 1
- Should we archive this repository? HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from protopipe-grid-interface.