dkms module will not build on Ubuntu 22.04.3 LTS

[im-0]

dkms module will not build on Ubuntu 22.04.3 LTS

[alkopit]

sorry, problem selffixed...)

[alkopit]

p212
I successfully turned on the HBA, but after a reboot the disks connected to the controller are not displayed. Why?

root@hba:~/hpsahba# ./hpsahba -i /dev/sg0
VENDOR_ID='HP'
PRODUCT_ID='P212'
BOARD_ID='0x3241103c'
SOFTWARE_NAME=''
HARDWARE_NAME=''
RUNNING_FIRM_REV='6.64'
ROM_FIRM_REV='6.63'
REC_ROM_INACTIVE_REV='6.63'
YET_MORE_CONTROLLER_FLAGS='0xfa51a227'
NVRAM_FLAGS='0x08'
HBA_MODE_SUPPORTED=1
HBA_MODE_ENABLED=1

root@hba:~/hpsahba# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
loop0 7:0 0 67.8M 1 loop /snap/lxd/22753
loop1 7:1 0 47M 1 loop /snap/snapd/16292
loop2 7:2 0 62M 1 loop /snap/core20/1611
loop3 7:3 0 91.9M 1 loop /snap/lxd/24061
sda 8:0 0 447.1G 0 disk
├─sda1 8:1 0 1M 0 part
├─sda2 8:2 0 2G 0 part /boot
└─sda3 8:3 0 445.1G 0 part
└─ubuntu--vg-ubuntu--lv 253:0 0 100G 0 lvm /
sdb 8:16 1 115.5G 0 disk
├─sdb1 8:17 1 50M 0 part
├─sdb2 8:18 1 50M 0 part
└─sdb3 8:19 1 115.4G 0 part

[OMMJAI]

Hi, You have to use the command sudo echo "options hpsa hpsa_use_nvram_hba_flag=1" > /etc/modprobe.d/hpsa.conf
What this does is modifies hpsa.conf. So that you will have the disks on reboot.

[OMMJAI]

Could you explain how you used the dkms module on linux kernel 5.15. I am stuck on kernel 5.4 as the dkms' version number is limited to 5.8.