Comments (5)
Apollon77
commented on July 25, 2024
1
Can you try to set "refreshPeriod" in the plugin config to a lower value in your config ... default value according to plugin github page is 600s (=10min) ... or wait that time.
Basically Homebridge loads the values when you open the page in the Home app and so fetches the current values. If you would use two devices and use Somfy app one one and have the home app open on the page with the data on the second and then change in somfy app ... also home app would not update the values. So it seems to you need to poll in case of this "Protocol".
Is that working then?
from iobroker.ham.
Apollon77
commented on July 25, 2024
Can you please set adapter to debug log (Instances - expert mode - logstufe as column) and post log from init and such an "external" change and a change via iobroker and please note down time-wise when you did what so that I can check log not too blindly ;-)
from iobroker.ham.
blackeagle998
commented on July 25, 2024
Do you want me to write in english or german, what`s easier for you?
- Set Polling Intervall to 60 seconds
- Set ham adapter to debug mode as decribed from you
Testcase:
- blind was "Arbeitszimmer" was closed --> current-position = 0 %
- then I set target-position manually to 25% --> worked, current-position was changed to 25%, blind opened a little bit
- then I opened the blind completely via SOMFY app --> nothing happened with states target-position and current-position, I waited more than two minutes
- then I set target-position manually to 0% --> worked, current-position was changed to 0%, blind was fully closed
Log:
ham.0 | 2019-12-05 19:07:36.684 | debug | (10097) lookup id: Arbeitszimmer.Arbeitszimmer.Position-State
-- | -- | -- | --
ham.0 | 2019-12-05 19:07:36.684 | info | (10097) stateChange ham.0.Arbeitszimmer.Arbeitszimmer.Position-State {"val":2,"ack":true,"ts":1575569256667,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575569256667}
ham.0 | 2019-12-05 19:07:36.683 | debug | (10097) lookup id: Arbeitszimmer.Arbeitszimmer.Current-Position
ham.0 | 2019-12-05 19:07:36.682 | info | (10097) stateChange ham.0.Arbeitszimmer.Arbeitszimmer.Current-Position {"val":0,"ack":true,"ts":1575569256667,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575569256667}
ham.0 | 2019-12-05 19:07:36.658 | debug | (10097) [2019-12-5 7:07:36 PM] [Connexoon] [Arbeitszimmer] setClosure COMPLETED
ham.0 | 2019-12-05 19:07:20.662 | debug | (10097) lookup id: Arbeitszimmer.Arbeitszimmer.Position-State
ham.0 | 2019-12-05 19:07:20.661 | info | (10097) stateChange ham.0.Arbeitszimmer.Arbeitszimmer.Position-State {"val":0,"ack":true,"ts":1575569240658,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575569240658}
ham.0 | 2019-12-05 19:07:18.662 | debug | (10097) [2019-12-5 7:07:18 PM] [Connexoon] Listener registered d73eaa79-d9b6-8679-1304-8590e8775d74
ham.0 | 2019-12-05 19:07:18.476 | debug | (10097) [2019-12-5 7:07:18 PM] [Connexoon] [Arbeitszimmer] setClosure[100]
ham.0 | 2019-12-05 19:07:16.486 | debug | (10097) lookup id: Arbeitszimmer.Arbeitszimmer.Target-Position
ham.0 | 2019-12-05 19:07:16.485 | info | (10097) stateChange ham.0.Arbeitszimmer.Arbeitszimmer.Target-Position {"val":0,"ack":true,"ts":1575569236479,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575569236467}
ham.0 | 2019-12-05 19:07:16.474 | debug | (10097) ack is not set!
ham.0 | 2019-12-05 19:07:16.473 | debug | (10097) lookup id: Arbeitszimmer.Arbeitszimmer.Target-Position
ham.0 | 2019-12-05 19:07:16.472 | info | (10097) stateChange ham.0.Arbeitszimmer.Arbeitszimmer.Target-Position {"val":0,"ack":false,"ts":1575569236467,"q":0,"from":"system.adapter.admin.0","user":"system.user.admin","lc":1575569236467}
ham.0 | 2019-12-05 19:07:11.532 | debug | (10097) system.adapter.admin.0: logging false
ham.0 | 2019-12-05 19:05:47.680 | debug | (10097) system.adapter.admin.0: logging true
ham.0 | 2019-12-05 19:05:46.520 | debug | (10097) system.adapter.admin.0: logging false
ham.0 | 2019-12-05 19:05:03.982 | debug | (10097) system.adapter.admin.0: logging true
ham.0 | 2019-12-05 19:04:22.619 | debug | (10097) lookup id: Arbeitszimmer.Arbeitszimmer.Position-State
ham.0 | 2019-12-05 19:04:22.619 | info | (10097) stateChange ham.0.Arbeitszimmer.Arbeitszimmer.Position-State {"val":2,"ack":true,"ts":1575569062612,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575569062612}
ham.0 | 2019-12-05 19:04:22.619 | debug | (10097) lookup id: Arbeitszimmer.Arbeitszimmer.Current-Position
ham.0 | 2019-12-05 19:04:22.618 | info | (10097) stateChange ham.0.Arbeitszimmer.Arbeitszimmer.Current-Position {"val":26,"ack":true,"ts":1575569062609,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575569062609}
ham.0 | 2019-12-05 19:04:22.618 | debug | (10097) lookup id: Arbeitszimmer.Arbeitszimmer.Current-Position
ham.0 | 2019-12-05 19:04:22.618 | info | (10097) stateChange ham.0.Arbeitszimmer.Arbeitszimmer.Current-Position {"val":25,"ack":true,"ts":1575569062608,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575569062608}
ham.0 | 2019-12-05 19:04:22.600 | debug | (10097) [2019-12-5 7:04:22 PM] [Connexoon] [Arbeitszimmer] setClosure COMPLETED
ham.0 | 2019-12-05 19:04:18.601 | debug | (10097) lookup id: Arbeitszimmer.Arbeitszimmer.Position-State
ham.0 | 2019-12-05 19:04:18.600 | info | (10097) stateChange ham.0.Arbeitszimmer.Arbeitszimmer.Position-State {"val":1,"ack":true,"ts":1575569058596,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575569058596}
ham.0 | 2019-12-05 19:04:16.183 | debug | (10097) [2019-12-5 7:04:16 PM] [Connexoon] Listener registered d73be1ab-d9b6-8679-1304-8590ebf76764
ham.0 | 2019-12-05 19:04:16.010 | debug | (10097) [2019-12-5 7:04:16 PM] [Connexoon] [Arbeitszimmer] setClosure[75]
ham.0 | 2019-12-05 19:04:14.013 | debug | (10097) lookup id: Arbeitszimmer.Arbeitszimmer.Target-Position
ham.0 | 2019-12-05 19:04:14.012 | info | (10097) stateChange ham.0.Arbeitszimmer.Arbeitszimmer.Target-Position {"val":25,"ack":true,"ts":1575569054010,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575569054003}
ham.0 | 2019-12-05 19:04:14.007 | debug | (10097) ack is not set!
ham.0 | 2019-12-05 19:04:14.006 | debug | (10097) lookup id: Arbeitszimmer.Arbeitszimmer.Target-Position
ham.0 | 2019-12-05 19:04:14.006 | info | (10097) stateChange ham.0.Arbeitszimmer.Arbeitszimmer.Target-Position {"val":25,"ack":false,"ts":1575569054003,"q":0,"from":"system.adapter.admin.0","user":"system.user.admin","lc":1575569054003}
ham.0 | 2019-12-05 19:04:07.601 | debug | (10097) system.adapter.admin.0: logging false
ham.0 | 2019-12-05 19:03:54.790 | debug | (10097) lookup id: Entryway.0000007F.Name
ham.0 | 2019-12-05 19:03:54.789 | info | (10097) stateChange ham.0.Entryway.0000007F.Name {"val":"","ack":true,"ts":1575569034674,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775537}
ham.0 | 2019-12-05 19:03:54.753 | debug | (10097) lookup id: Entryway.0000007F.Carbon-Monoxide-Peak-Level
ham.0 | 2019-12-05 19:03:54.753 | info | (10097) stateChange ham.0.Entryway.0000007F.Carbon-Monoxide-Peak-Level {"val":0,"ack":true,"ts":1575569034657,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775537}
ham.0 | 2019-12-05 19:03:54.751 | debug | (10097) lookup id: Entryway.0000007F.Carbon-Monoxide-Level
ham.0 | 2019-12-05 19:03:54.751 | info | (10097) stateChange ham.0.Entryway.0000007F.Carbon-Monoxide-Level {"val":0,"ack":true,"ts":1575569034657,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775537}
ham.0 | 2019-12-05 19:03:54.727 | debug | (10097) lookup id: Entryway.0000007F.Status-Tampered
ham.0 | 2019-12-05 19:03:54.726 | info | (10097) stateChange ham.0.Entryway.0000007F.Status-Tampered {"val":0,"ack":true,"ts":1575569034657,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775537}
ham.0 | 2019-12-05 19:03:54.725 | debug | (10097) lookup id: Entryway.0000007F.Status-Low-Battery
ham.0 | 2019-12-05 19:03:54.725 | info | (10097) stateChange ham.0.Entryway.0000007F.Status-Low-Battery {"val":0,"ack":true,"ts":1575569034657,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775537}
ham.0 | 2019-12-05 19:03:54.723 | debug | (10097) lookup id: Entryway.0000007F.Status-Fault
ham.0 | 2019-12-05 19:03:54.723 | info | (10097) stateChange ham.0.Entryway.0000007F.Status-Fault {"val":0,"ack":true,"ts":1575569034657,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775537}
ham.0 | 2019-12-05 19:03:54.721 | debug | (10097) lookup id: Entryway.0000007F.Status-Active
ham.0 | 2019-12-05 19:03:54.719 | info | (10097) stateChange ham.0.Entryway.0000007F.Status-Active {"val":false,"ack":true,"ts":1575569034657,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775537}
ham.0 | 2019-12-05 19:03:54.718 | debug | (10097) lookup id: Entryway.0000007F.Manual-Test-Active
ham.0 | 2019-12-05 19:03:54.718 | info | (10097) stateChange ham.0.Entryway.0000007F.Manual-Test-Active {"val":false,"ack":true,"ts":1575569034657,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775536}
ham.0 | 2019-12-05 19:03:54.717 | debug | (10097) lookup id: Entryway.0000007F.Status-Active
ham.0 | 2019-12-05 19:03:54.716 | info | (10097) stateChange ham.0.Entryway.0000007F.Status-Active {"val":true,"ack":true,"ts":1575569034657,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575569034657}
ham.0 | 2019-12-05 19:03:54.715 | debug | (10097) lookup id: Entryway.0000007F.Status-Low-Battery
ham.0 | 2019-12-05 19:03:54.715 | info | (10097) stateChange ham.0.Entryway.0000007F.Status-Low-Battery {"val":0,"ack":true,"ts":1575569034657,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775537}
ham.0 | 2019-12-05 19:03:54.714 | debug | (10097) lookup id: Entryway.0000007F.Name
ham.0 | 2019-12-05 19:03:54.713 | info | (10097) stateChange ham.0.Entryway.0000007F.Name {"val":"Entryway Carbon Monoxide","ack":true,"ts":1575569034657,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575569034657}
ham.0 | 2019-12-05 19:03:54.711 | debug | (10097) lookup id: Entryway.0000007F.Carbon-Monoxide-Detected
ham.0 | 2019-12-05 19:03:54.711 | info | (10097) stateChange ham.0.Entryway.0000007F.Carbon-Monoxide-Detected {"val":0,"ack":true,"ts":1575569034656,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775536}
ham.0 | 2019-12-05 19:03:54.710 | debug | (10097) lookup id: Entryway.00000087.Name
ham.0 | 2019-12-05 19:03:54.710 | info | (10097) stateChange ham.0.Entryway.00000087.Name {"val":"","ack":true,"ts":1575569034656,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775536}
ham.0 | 2019-12-05 19:03:54.709 | debug | (10097) lookup id: Entryway.00000087.Status-Low-Battery
ham.0 | 2019-12-05 19:03:54.708 | info | (10097) stateChange ham.0.Entryway.00000087.Status-Low-Battery {"val":0,"ack":true,"ts":1575569034656,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775536}
ham.0 | 2019-12-05 19:03:54.707 | debug | (10097) lookup id: Entryway.00000087.Status-Tampered
ham.0 | 2019-12-05 19:03:54.707 | info | (10097) stateChange ham.0.Entryway.00000087.Status-Tampered {"val":0,"ack":true,"ts":1575569034656,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775536}
ham.0 | 2019-12-05 19:03:54.706 | debug | (10097) lookup id: Entryway.00000087.Status-Fault
ham.0 | 2019-12-05 19:03:54.706 | info | (10097) stateChange ham.0.Entryway.00000087.Status-Fault {"val":0,"ack":true,"ts":1575569034656,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775536}
ham.0 | 2019-12-05 19:03:54.705 | debug | (10097) lookup id: Entryway.00000087.Status-Active
ham.0 | 2019-12-05 19:03:54.705 | info | (10097) stateChange ham.0.Entryway.00000087.Status-Active {"val":false,"ack":true,"ts":1575569034656,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775536}
ham.0 | 2019-12-05 19:03:54.704 | debug | (10097) lookup id: Entryway.00000087.Manual-Test-Active
ham.0 | 2019-12-05 19:03:54.704 | info | (10097) stateChange ham.0.Entryway.00000087.Manual-Test-Active {"val":false,"ack":true,"ts":1575569034656,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775536}
ham.0 | 2019-12-05 19:03:54.702 | debug | (10097) lookup id: Entryway.00000087.Status-Active
ham.0 | 2019-12-05 19:03:54.702 | info | (10097) stateChange ham.0.Entryway.00000087.Status-Active {"val":true,"ack":true,"ts":1575569034656,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575569034656}
ham.0 | 2019-12-05 19:03:54.702 | debug | (10097) lookup id: Entryway.00000087.Status-Low-Battery
ham.0 | 2019-12-05 19:03:54.701 | info | (10097) stateChange ham.0.Entryway.00000087.Status-Low-Battery {"val":0,"ack":true,"ts":1575569034655,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775536}
ham.0 | 2019-12-05 19:03:54.700 | debug | (10097) lookup id: Entryway.00000087.Name
ham.0 | 2019-12-05 19:03:54.700 | info | (10097) stateChange ham.0.Entryway.00000087.Name {"val":"Entryway Smoke","ack":true,"ts":1575569034655,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575569034655}
ham.0 | 2019-12-05 19:03:54.699 | debug | (10097) lookup id: Entryway.00000087.Smoke-Detected
ham.0 | 2019-12-05 19:03:54.699 | info | (10097) stateChange ham.0.Entryway.00000087.Smoke-Detected {"val":0,"ack":true,"ts":1575569034655,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775535}
ham.0 | 2019-12-05 19:03:54.698 | debug | (10097) lookup id: Entryway.Accessory-Information.Accessory-Flags
ham.0 | 2019-12-05 19:03:54.698 | info | (10097) stateChange ham.0.Entryway.Accessory-Information.Accessory-Flags {"val":0,"ack":true,"ts":1575569034655,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775535}
ham.0 | 2019-12-05 19:03:54.697 | debug | (10097) lookup id: Entryway.Accessory-Information.Hardware-Revision
ham.0 | 2019-12-05 19:03:54.697 | info | (10097) stateChange ham.0.Entryway.Accessory-Information.Hardware-Revision {"val":"","ack":true,"ts":1575569034655,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775535}
ham.0 | 2019-12-05 19:03:54.695 | debug | (10097) lookup id: Entryway.Accessory-Information.Firmware-Revision
ham.0 | 2019-12-05 19:03:54.695 | info | (10097) stateChange ham.0.Entryway.Accessory-Information.Firmware-Revision {"val":"3.1.4rc3","ack":true,"ts":1575569034655,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":15755337
ham.0 | 2019-12-05 19:03:54.695 | debug | (10097) lookup id: Entryway.Accessory-Information.Serial-Number
ham.0 | 2019-12-05 19:03:54.694 | info | (10097) stateChange ham.0.Entryway.Accessory-Information.Serial-Number {"val":"06AA01AC331701QN","ack":true,"ts":1575569034655,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575
ham.0 | 2019-12-05 19:03:54.694 | debug | (10097) lookup id: Entryway.Accessory-Information.Name
ham.0 | 2019-12-05 19:03:54.694 | info | (10097) stateChange ham.0.Entryway.Accessory-Information.Name {"val":"Entryway","ack":true,"ts":1575569034655,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775535}
ham.0 | 2019-12-05 19:03:54.693 | debug | (10097) lookup id: Entryway.Accessory-Information.Model
ham.0 | 2019-12-05 19:03:54.693 | info | (10097) stateChange ham.0.Entryway.Accessory-Information.Model {"val":"Nest Protect","ack":true,"ts":1575569034655,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775535}
ham.0 | 2019-12-05 19:03:54.691 | debug | (10097) lookup id: Entryway.Accessory-Information.Manufacturer
ham.0 | 2019-12-05 19:03:54.691 | info | (10097) stateChange ham.0.Entryway.Accessory-Information.Manufacturer {"val":"Nest","ack":true,"ts":1575569034655,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775534}
ham.0 | 2019-12-05 19:03:54.690 | debug | (10097) lookup id: Entryway.Accessory-Information.Identify
ham.0 | 2019-12-05 19:03:54.690 | info | (10097) stateChange ham.0.Entryway.Accessory-Information.Identify {"val":false,"ack":true,"ts":1575569034655,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775533}
ham.0 | 2019-12-05 19:03:54.686 | debug | (10097) lookup id: Home/Away.Home-Occupied.Name
ham.0 | 2019-12-05 19:03:54.686 | info | (10097) stateChange ham.0.Home/Away.Home-Occupied.Name {"val":"","ack":true,"ts":1575569034654,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775530}
ham.0 | 2019-12-05 19:03:54.686 | debug | (10097) lookup id: Home/Away.Home-Occupied.On
ham.0 | 2019-12-05 19:03:54.683 | info | (10097) stateChange ham.0.Home/Away.Home-Occupied.On {"val":true,"ack":true,"ts":1575569034654,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575544751261}
ham.0 | 2019-12-05 19:03:54.683 | debug | (10097) lookup id: Home/Away.Home-Occupied.Name
ham.0 | 2019-12-05 19:03:54.682 | info | (10097) stateChange ham.0.Home/Away.Home-Occupied.Name {"val":"Home Occupied","ack":true,"ts":1575569034654,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575569034654}
ham.0 | 2019-12-05 19:03:54.682 | debug | (10097) lookup id: Home/Away.Accessory-Information.Accessory-Flags
ham.0 | 2019-12-05 19:03:54.682 | info | (10097) stateChange ham.0.Home/Away.Accessory-Information.Accessory-Flags {"val":0,"ack":true,"ts":1575569034654,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775529}
ham.0 | 2019-12-05 19:03:54.682 | debug | (10097) lookup id: Home/Away.Accessory-Information.Hardware-Revision
ham.0 | 2019-12-05 19:03:54.682 | info | (10097) stateChange ham.0.Home/Away.Accessory-Information.Hardware-Revision {"val":"","ack":true,"ts":1575569034654,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775529}
ham.0 | 2019-12-05 19:03:54.681 | debug | (10097) lookup id: Home/Away.Accessory-Information.Firmware-Revision
ham.0 | 2019-12-05 19:03:54.681 | info | (10097) stateChange ham.0.Home/Away.Accessory-Information.Firmware-Revision {"val":"3.1.4rc3","ack":true,"ts":1575569034654,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533
ham.0 | 2019-12-05 19:03:54.681 | debug | (10097) lookup id: Home/Away.Accessory-Information.Serial-Number
ham.0 | 2019-12-05 19:03:54.681 | info | (10097) stateChange ham.0.Home/Away.Accessory-Information.Serial-Number {"val":"06AA01AC331701QN","ack":true,"ts":1575569034654,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":157
ham.0 | 2019-12-05 19:03:54.680 | debug | (10097) lookup id: Home/Away.Accessory-Information.Name
ham.0 | 2019-12-05 19:03:54.680 | info | (10097) stateChange ham.0.Home/Away.Accessory-Information.Name {"val":"Home/Away","ack":true,"ts":1575569034654,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775529}
ham.0 | 2019-12-05 19:03:54.680 | debug | (10097) lookup id: Home/Away.Accessory-Information.Model
ham.0 | 2019-12-05 19:03:54.680 | info | (10097) stateChange ham.0.Home/Away.Accessory-Information.Model {"val":"Nest Home/Away Sensor","ack":true,"ts":1575569034654,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":157553
ham.0 | 2019-12-05 19:03:54.679 | debug | (10097) lookup id: Home/Away.Accessory-Information.Manufacturer
ham.0 | 2019-12-05 19:03:54.679 | info | (10097) stateChange ham.0.Home/Away.Accessory-Information.Manufacturer {"val":"Nest","ack":true,"ts":1575569034653,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775529}
ham.0 | 2019-12-05 19:03:54.679 | debug | (10097) lookup id: Home/Away.Accessory-Information.Identify
ham.0 | 2019-12-05 19:03:54.678 | info | (10097) stateChange ham.0.Home/Away.Accessory-Information.Identify {"val":false,"ack":true,"ts":1575569034653,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1575533775529}
ham.0 | 2019-12-05 19:03:54.621 | debug | (10097) Homebridge Wrapper Bridge publish {"username":"FF:FF:FF:FF:FF:FF","port":0,"pincode":"0","category":2}
from iobroker.ham.
blackeagle998
commented on July 25, 2024
I set "refreshPeriod" to 5 seconds, that worked.
Thank you very much!!!
Unbelievable that I did not see this option yesterday... :-)
from iobroker.ham.
Apollon77
commented on July 25, 2024
But think about if 5s is really best ... it is much radio-traffic. ...
from iobroker.ham.
Related Issues (20)
- Govee Plugin 5.2.0 - Lampen lassen sich nicht bedienen HOT 9
- homebridge-simple-wled keine Objekte im Wrapper-Modus HOT 4
- Update stable version in repo from 4.0.2 to 5.1.0
- Keine Werte in iobroker von Balboa HOT 12
- Error while getting current value: -70402 HOT 3
- error | unhandled promise rejection: undefined HOT 5
- Globaler Modus startet nicht EADDRINUSE HOT 2
- Immer wieder error | Exception-Code: EADDRINUSE HOT 4
- Neustart klappt nicht reibungslos HOT 2
- Update stable version in repo from 5.3.0 to 5.3.1
- ham started nicht - "Reading destroy" HOT 8
- Scenes als Objekt HOT 1
- Blank Page HOT 13
- HAM adapter: device appears with wrong name and not registered device appears.
- Plugin Installation HOT 5
- Envoy-Enphase Plugin is crashing at startup HOT 5
- homebridge-samsung-tizen not working HOT 3
- Newer version (>3.7.6) of blink-for-home plugin don't work
- Ham adapter is not displayed, no interface / Ham Adaper wird nicht angezeigt, keine Oberfläche HOT 6
- homebridge-ecobee3-sensors HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from iobroker.ham.