Issue with running makeKernel.sh

[jetsonhacks]

Issue with running makeKernel.sh

[JINGERGER]

u probably choose the wrong SOC(Tegra) when u set kernal configuration. Should use the default setting.

[Woz4tetra]

I'm also having this issue. I tried the 21x, 19x, and 18x family configurations. What does your xconfig window look like?

[JINGERGER]

Make sure what's ur L4T version

[Woz4tetra]

I used "head -n 1 /etc/nv_tegra_release"
I'm pretty sure I'm running R28.1.0

[JINGERGER]

I think the default is both 18x and 19x for SOC when u open the configuration window

[Woz4tetra]

I used the default options but got those error messages. If I run sudo make xconfig in /usr/src/kernel/kernel-4.4 then run ./makeKernel.sh again, will it use my updated settings?

[JINGERGER]

I didn't try that, but I am sure once u make successfully, u have to cp the image to imagessd if u have ssd.

[Woz4tetra]

Still the same error as the original post. Not sure what's going on... I'm pretty sure my changes to the config are going through since I get different errors for each SOC. I'm on the default settings right now and get the same error as before.

[JINGERGER]

Which jetpack do u install? I install 3.1

[Woz4tetra]

Same. I used the jetsonhacks guide. It was a few weeks ago, maybe I installed it wrong?

[JINGERGER]

Sorry, I can't figure why it is not successful. Maybe post it on jethacks website

…

On Wed, Oct 11, 2017 at 3:15 PM Woz4tetra ***@***.***> wrote: Same. I used the jetsonhacks guide. It was a few weeks ago, maybe I installed it wrong? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#2 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/APdvBRwaY2z5jCSY61Rk4hWHtsL0X1S2ks5srRPrgaJpZM4Njkzy> .

[Woz4tetra]

no problem. Thanks for the help!