having trouble with pairing process, possibly because using a screen reader

[a-singer]

having trouble with pairing process, possibly because using a screen reader

[HandisableL]

Flash firmware in Seeed Studio Xiao NRF 52840,Open WEB Config tool,Click open device,select HID Remapper Bluetooth,Connect
press Pair new device,
now you can turn BLE Device in Pairing mode(in my case my MX MASTER2S can pair in a second)

[HandisableL]

Addition:Pairing a Bluetooth Keyboard seems need input pair code in keyboard and press enter to complete,so i think maybe need some extra feature such as print code in webtool or cmdline to pairing a BLE Keyboard

[jfedor2]

Hi,

I realize this is far from optimal for you, but the way it works is there is no feedback on the web interface when pairing devices.

You click the "Pair new device" button, you do whatever you need to do on the keyboard to put it in pairing mode, usually you hold a button for a moment, and then the rest should happen automatically, the devices should find one another and pair.

Again, I know this isn't helpful when you're blind, but when HID Remapper is in pairing mode, the blue LED is on constantly and when some devices are currently connected, it blinks, with the number of blinks corresponding to the number of devices connected.

I need to think on how to make it all more accessible in the future.

[techhitnz]

I'm having the same issue. I can't get a bluetooth keyboard or ps5 dualsense to pair with the xiao. The blue light stays on solidly the whole time and never pairs with either of those devices.

[jfedor2]

@techhitnz You're not having the same issue, you're trying to connect a Bluetooth Classic device. Those will never work with an nRF52 based HID Remapper.