joem/jwm_kicad_symbols_misc

My miscellaneous symbols for KiCad

jwm_kicad_symbols_misc's Issues

Add images for Eurorack_Header_LZX_NC-5vCvGate, Eurorack_Header_LZX_NC-CvGate, Eurorack_Header_LZX_NC-5v

Eurorack_Header_LZX_NC-5vCvGate, Eurorack_Header_LZX_NC-CvGate, Eurorack_Header_LZX_NC-5v are new symbols, so they should have images generated. Low priority, though, since they're so similar to Eurorack_Header_LZX.

update images for 74VHC4046N_LZX, Eurorack_Header_LZX, LT1251_LZX

I did minor updates to those symbols, so the images need to be updated. Low priority, though.

Electrical rules check failed: EuroRack header & LT1251

Hi Joe, it's entirely possible I am not using these symbols correctly, but in the electrical rules check I get a string of errors from two of your parts.

Most are from the EuroRack header, of a few types. The first type is "a pin with a 'no connection' flag is connected" (pins 11, 13, 15) since I have these pins marked with no connection, however they are internally connected to other header pins. The second type is "pins of type Output and Output are connected" (basically all the +V pins connected, all the GND pins connected, and all the -V pins connected).

The last errors are for the LT1251, which assumes that 10 and 12 are power pins.

Any suggestions how to correct these errors would be greatly appreciated. Thank you for your contributions to the community! Derek