Cannot read from AMD Chips

[jondot]

Cannot read from AMD Chips

[jondot]

Hi there,
If you use Groundcontrol outside of a Raspberry Pi, then you might hit unexpected issues. I'm not familiar with this sensor to great depth, but what you can verify is that it is readable in a "file-like" fasion from Groundcontrol (check permissions), by trying a cat your-file.
The result should be something like 47345 to indicate 47.345 centigrade.
Hope this helps

[Candunc]

Thanks, no idea what the main issue was but this is easily fixed by creating an alias to the file.
The workaround is simply using the command sudo ln -s /sys/bus/pci/drivers/k8temp/0000:00:18.3/temp1_input ~/temp for example, then Groundcontrol will read it properly after you change the file location to /home/[username]/temp

[jondot]

yep sorry I had that in my mind but eventually it didn't jump into writing 👍