PSP-3001 TA-090

[khubik2]

PSP-3001 TA-090

[migilito18]

@migilito18 you also need a magic memory stick created from sony's oficial service tools

thank you very much it work im so happy im about to cry cuz of happiness

[khubik2]

From the looks of it, you don't provide enough power to PSP. You can try doing it again with DC jack plugged in or with something like a smartphone battery or 18650 cell connected in parallel to your assembly's power lines.

[jetrux]

Hello, thanks for the answer!!! I realized that this was happening because I didn't seem to configure the MemoryStick correctly. I was using Jig Replicator and it doesn't work for me that's why it turns on and off. trying with other programs like "rainsipl" and it stayed on for a long time but since I didn't dump the msid.bin it doesn't seem to read it and it stays on.
I don't have another PSP otherwise I would dump the msid.bin.
Is there a way to extract the ID from the Memory Stick on the PC and thus generate the msid.bin?

[khubik2]

Oh, I forgot that this could happen too. Rain's IPL didn't work for me.
You don't need MSID anymore - just use Balika's DDCv9.

[jetrux]

Hello, I was testing with the DDCv9 as you told me and what I did was download the release and pass it to the memory stick, I proceeded to start the pysweeper but nothing, only the green led light turns on and nothing else.
It seems that this PSP is also damaged in the card reader sector because it does not respond and stays on, that is, the orange led of the card reader does not turn on but the green led stays on.
I don't think it's the Memory Stick because the PC card reader reads it and I can do everything.

[khubik2]

i don't know what could be your issue then... are you sure you are launching pysweeper in service mode and not autoboot mode?

[jetrux]

Hello, yes, I do it with the service mode option but nothing happens. I use the JigKick Media Creator as in the tutorial, I proceed to put the MS in the PSP I run the pysweeper and the PSP turns on and off in a few seconds.

I leave you what comes out in the Log:

Service started.
Using serial FFFFFFFF
5A 02 01 A2
A5 05 06 10C306 76
5A020C97
A5 06 06 FFFFFFFF 52
5A 0B 80 D9B666983F7A8436EA 30
A5 12 06 2C38F95C6A395E0ADE61665DDDFE42B7 A8
5A 0A 81 CC74DCA039357568 13
A5 12 06 A3FD6213992138F119AF4D903669B25E F6
5A 02 01 A2
A5 05 06 10C306 76
5A 02 03 A0
A5 04 06 3610 0A
5A020C97
A5 06 06 FFFFFFFF 52
5A 0B 80 D9367EA5A148917649AF
A5 12 06 C9394B4A1F89207F5F6AA348DF6458A5 70
5A 0A 81 E27C399590B42A6F 11
A5 12 06 AA71C5232B16AF1DD2E0E9BEFEEA202C A5

In the end I don't know what to do.

[zecoxao]

did you inject the ipl from balika's M33 TM folder?

[migilito18]

hello i have date code 8d and i have this issue it didnt power on every time i tried to use the psysweep
i follow the step but it didnt work i dont know whats wrong.
this is the only log that shows on the psysweeper:

Service started.
Using serial FFFFFFFF
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76
5A 02 01 A2
A5 05 06 10C306 76

[zecoxao]

@migilito18 you also need a magic memory stick created from sony's oficial service tools

[zecoxao]

https://www.psx-place.com/threads/unbrick-psp-1000-2000-3000-with-6-20-jigkick.40551/

[jetrux]

did you inject the ipl from balika's M33 TM folder?

Hello, do not inject the ipl. The only thing I did was connect the MS to the PC and run the Jig Media Creator and select the option to install "DC9+M33", that is, the 3rd option and after I finished, place the MS on the bricked PSP and then run the pysweeper. As the sample tutorial

[zecoxao]

did you inject the ipl from balika's M33 TM folder?

Hello, do not inject the ipl. The only thing I did was connect the MS to the PC and run the Jig Media Creator and select the option to install "DC9+M33", that is, the 3rd option and after I finished, place the MS on the bricked PSP and then run the pysweeper. As the sample tutorial

follow tutorial i left behind

[jetrux]

did you inject the ipl from balika's M33 TM folder?

Hello, do not inject the ipl. The only thing I did was connect the MS to the PC and run the Jig Media Creator and select the option to install "DC9+M33", that is, the 3rd option and after I finished, place the MS on the bricked PSP and then run the pysweeper. As the sample tutorial

follow tutorial i left behind

That's what I'm doing and I've had news. I got the PSP 3010 to turn on and install the firmware. it was a success!!!
After that I tried it with a PSP 2001 and it only turned on the screen but in black and the wlan light stays on. What could it be?

[zecoxao]

did you inject the ipl from balika's M33 TM folder?

Hello, do not inject the ipl. The only thing I did was connect the MS to the PC and run the Jig Media Creator and select the option to install "DC9+M33", that is, the 3rd option and after I finished, place the MS on the bricked PSP and then run the pysweeper. As the sample tutorial

follow tutorial i left behind

That's what I'm doing and I've had news. I got the PSP 3010 to turn on and install the firmware. it was a success!!! After that I tried it with a PSP 2001 and it only turned on the screen but in black and the wlan light stays on. What could it be?

it could be that your 2001 has a bad screen that needs replacement. do that first