Comments (4)
Thx for the input.
Support for the ITE IT8712F is also required in issue 27. Some ITE IT8712F
revisions
might need support for cases where no 16-bit fan tacho is available (which is
the
main reason for not implementing support for it so far).
Better labels for temperatures would be good, but they seem to be very mainboard
specific (at least last time I checked about them for the ITE series).
I am not sure if I will use all suggested changes, but the ITE IT8712F will be
added
for sure.
Original comment by moel.mich
on 22 Apr 2010 at 12:25
- Changed state: Accepted
from open-hardware-monitor.
Regarding ITE 8712F
I'm working with an older machine and the +12v voltage appears to be reported
incorrectly.
currently the value is calculated:
voltage = value + (value -Vf) * Ri/Rf
from the data sheet calculations should follow:
Positive Voltage: Vs = Vin X (Ra+Rb) / Rb
Negative Voltage: Vs = (1+Rin/Rf) X Vin – (Rin/Rf) X VREF
Is there a way to change the formula not just the parameters?
Also if you need resistor values from the main board i can supply these.
From attached report:
Version: 0.2.1.0
Sensors
|
+-+ Gigabyte GA-K8NF-9 (/mainboard)
| |
| +-+ ITE IT8712F (/lpc/it8712f)
| | +- Voltage[7] : 9.77477 : 0.816 : 10.09213 : +12V
Original comment by [email protected]
on 30 Jan 2011 at 1:02
Attachments:
from open-hardware-monitor.
The formulas you posted can be simplified as follows
Positive voltage:
voltage = value * (Ra + Rb) / Rb
= value * (Ra / Rb + 1)
= value * (Ra / Rb) + value
= value + (value - 0) * Ra / Rb
You get the same formula in the Open Hardware Monitor if you use:
Vf = 0, Ri = Ra, Rf = Rb.
Negative Voltage:
voltage = (1+Rin/Rf) * value – (Rin/Rf) * VREF
= value + (Rin/Rf) * value – (Rin/Rf) * VREF
= value + (Rin/Rf) * (value - VREF)
= value + (value - VREF) * Rin/Rf
You get the same formula in the Open Hardware Monitor if you use:
Vf = VREF, Ri = Rin, Rf = Rf.
This means the two formulas you posted are only special cases of the formula
used in the Open Hardware Monitor and no change of formula is required. If you
have correct resistor / reference voltage values for any mainboard, then these
are always welcome.
The current collection of resistor / reference voltage valuse can be found in
the source code:
http://code.google.com/p/open-hardware-monitor/source/browse/trunk/Hardware/Main
board/SuperIOHardware.cs
Original comment by moel.mich
on 30 Jan 2011 at 10:48
from open-hardware-monitor.
This issue should be fixed by revision r306.
Original comment by moel.mich
on 16 Apr 2011 at 2:51
- Changed state: Fixed
from open-hardware-monitor.
Related Issues (20)
- GPU/CPU Clockspeeds - Overclocking
- LM Sensors HOT 3
- Missing Fans / Readings for PWM Fans
- MSI z77ma-g45 (MS-7759) support
- Enhancement: absolute drive temperature instead of 'difference from 100' HOT 2
- Data transfer on snmp
- Fatal Exception when unchecked "Remote Web Server -> host" HOT 2
- Can't wake from standby/hibernation when ATI Mobility HD 2600 is monitored HOT 3
- Disk Active Time HOT 1
- Periodically losing all settings HOT 1
- Name of the RAID arrays corrupt
- IP Address Discovery Incorrect HOT 1
- Can't download source code. HOT 2
- Bug with HD4850 in Crossfire mode HOT 1
- Get data through WMI exception.(use wmic for linux)
- ASUS P8Z68-V/GEN3 w/ i5 2500k
- CPU core temperatures for AMD Vishera (FX-8350) are erroneous HOT 1
- ethernet blocked while using OpenHardwareMonitor HOT 1
- GPU RAM usage sensor
- Intel Core 2 Duo P8700 info not showing
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from open-hardware-monitor.